Abstract
The emergence of waste tire steel fiber (WTSF) which is an undervalued resource was borne out of the need to extract the useful materials in waste tires considering the sheer volume of this resource that is disposed of in landfills globally. These fibers find applications in tunnel linings, hydraulic structures, bridge decks, pavements and slope stabilization. The fiber length has positive influence on compressive strength (increased by more than 10%), flexural strength (increased by more than 50%) and split-tensile strength(increased by more than 30%) while slump and flow (increased by more than 80%) were reduced but can be avoided through careful mixing, reduction of coarse aggregates and utilization of short fibers. Utilization of WTSF contributes to the sustainability of the construction industry. This paper focuses on reviewing the contemporary management of waste tires, fresh and hardened properties of steel fibers extracted from the waste tires, usage of the steel fibers and the durability of concrete containing these fibers.
Similar content being viewed by others
References
Shannag MJ (2011) Characteristics of lightweight concrete containing mineral admixtures. Constr Build Mater 25:658–662. https://doi.org/10.1016/j.conbuildmat.2010.07.025
Atoyebi OD, Odeyemi OJ, SVA, (2018) Evaluation of Laterized Earth Moist Concrete in Construction Works. Int J Civ Eng Technol 9:327–333
Atoyebi OD, Sadiq OM (2018) Experimental data on flexural strength of reinforced concrete elements with waste glass particles as partial replacement for fine aggregate. Data Br. 18:846–859. https://doi.org/10.1016/j.dib.2018.03.104
Atoyebi OD, Odeyemi SO, Orama JA (2018) Experimental data on the splitting tensile strength of bamboo reinforced lateritic concrete using different culm sizes. Data Br 20:1960–1964. https://doi.org/10.1016/j.dib.2018.09.064
Plizzari G, Mindess S (2019) Fiber-reinforced concrete. In: Mindess SBT-Development in the Formulation and Reinforcement of Concrete. Woodhead Publishing Series in Civil and Structural Engineering. Woodhead Publishing, pp 257–287
Ayan E (2004) Parameter Optimization Of Steel Fibre Reinforced High Strength Concrete By Statistical Design And Analysis Of Experiments. Middle East Technical University, Ankara, Turkey
ACI Committee 544 (1996) State-of-the-art report on fiber reinforced concrete. ACI Committee 544 report 544.1R-96. Detroit
Yurtseven AE (2004) Determination of mechanical properties of hybrid fiber reinforced concrete. Graduate School of Natural and Applied Sciences, Middle East Technical University (Unpublished Masters Thesis)
Ndayambaje JC (2018) Structural performance and impact resistance of rubberized concrete. Pan-African University
Banthia N, Sappakittipakorn M (2007) Toughness enhancement in steel fiber reinforced concrete through fiber hybridization. Cem Concr Res. 37:1366–1372. https://doi.org/10.1016/j.cemconres.2007.05.005
Banthia N, Sheng J (1996) Fracture toughness of micro-fiber reinforced cement composites. Cem Concr Compos. 18:251–269
Hu H, Papastergiou P, Angelakopoulos H et al (2018) Mechanical properties of SFRC using blended manufactured and recycled tyre steel fibres. Constr Build Mater 163:376–389
Gopalaratnam VS, Gettu R (1995) On the characterization of flexural toughness in fiber reinforced concretes. Cem Concr Compos. 17:239–254. https://doi.org/10.1016/0958-9465(95)99506-O
Rashiddadash P, Ramezanianpour AA, Mahdikhani M (2014) Experimental investigation on flexural toughness of hybrid fiber reinforced concrete (HFRC) containing metakaolin and pumice. Constr Build Mater. 51:313–320. https://doi.org/10.1016/j.conbuildmat.2013.10.087
Nasir B (2009) Steel fiber reinforced concrete made with fibers extracted from used tyres. Addis Ababa University, Ethiopia
Pacheco-Torgal F, Ding Y, Jalali S (2012) Properties and durability of concrete containing polymeric wastes (tyre rubber and polyethylene terephthalate bottles): An overview. Constr Build Mater. 30:714–724. https://doi.org/10.1016/j.conbuildmat.2011.11.047
Thomas BS, Gupta RC, Kalla P, Cseteneyi L (2014) Strength, abrasion and permeation characteristics of cement concrete containing discarded rubber fine aggregates. Constr Build Mater. 59:204–212. https://doi.org/10.1016/j.conbuildmat.2014.01.074
Awolusi TF, Oke OL, Akinkurolere OO, Sojobi AO (2019) Application of response surface methodology: Predicting and optimizing the properties of concrete containing steel fibre extracted from waste tires with limestone powder as filler. Case Stud Constr Mater 10:e00212. https://doi.org/10.1016/j.cscm.2018.e00212
Thomas BS, Gupta RC (2016) A comprehensive review on the applications of waste tire rubber in cement concrete. Renew Sustain Energy Rev 54:1323–1333. https://doi.org/10.1016/j.rser.2015.10.092
Atoyebi OD, Odeyemi SO, Bello SA, Ogbeifun CO (2018) Splitting Tensile Strength Assessment of Lightweight Foamed Concrete Reinforced with Waste Tyre Steel Fibres. Int J Civ Eng Technol 9:1129–1137
Oliveira JRM, Silva HMRD, Abreu LPF, Fernandes SRM (2013) Use of a warm mix asphalt additive to reduce the production temperatures and to improve the performance of asphalt rubber mixtures. J Clean Prod. 41:15–22. https://doi.org/10.1016/j.jclepro.2012.09.047
Shen W, Shan L, Zhang T et al (2013) Investigation on polymer–rubber aggregate modified porous concrete. Constr Build Mater. 38:667–674. https://doi.org/10.1016/j.conbuildmat.2012.09.006
Gupta T, Sharma RK, Chaudhary S (2015) Impact reseistance of concrete containing waste rubber fiber and silica fume. Int J Impact Eng 83:76–87
Su H, Yang J, Ling T-C et al (2015) Properties of concrete prepared with waste tyre rubber particles of uniform and varying sizes. J Clean Prod. 91:288–296. https://doi.org/10.1016/j.jclepro.2014.12.022
Awolusi TF, Oke OL, Akinkurolere OO et al (2019) Performance comparison of neural network training algorithms in the modeling properties of steel fiber reinforced concrete. Heliyon 5:e01115. https://doi.org/10.1016/j.heliyon.2018.e01115
Awolusi TF, Oke OL, Akinkurolere OO, Atoyebi OD (2019) Comparison of response surface methodology and hybrid-training approach of artificial neural network in modelling the properties of concrete containing steel fibre extracted from waste tyres. Cogent Eng 6:1–18. https://doi.org/10.1080/23311916.2019.1649852
UN (2013) World Economic and Social Survey 2013: Sustainable Development Challenges. In: United Nations Dep. Econ. Soc. Aff. https://www.un.org/en/development/desa/publications/world-economic-and-social-survey-2013-sustainable-development-challenges.html#:~:text=The 2013 Survey examines the,addressed to achieve sustainable development.&text=Rising inequality%2C gaps and shortfa. Accessed 30 Sep 2020
WHO (2019) Malaria. In: World Malar. Rep. 2019, World Heal. Organ. https://www.who.int/publications/i/item/world-malaria-report-2019
Pilakoutas K, Neocleous K, Tlemat H (2004) Reuse of tyre steel fibres as concrete reinforcement. Proc ICE Eng Sustain. 157:131–138. https://doi.org/10.1680/ensu.157.3.131.48644
Achilleos C, Hadjimitsis D, Neocleous K et al (2011) Proportioning of steel fibre reinforced concrete mixes for pavement construction and their impact on environment and cost. Sustainability 3:965–983. https://doi.org/10.3390/su3070965
Bulei C, Todor MP, Heput T, Kiss I (2018) Directions for material recovery of used tires and their use in the production of new products intended for the industry of civil construction and pavements. IOP Conf Series: Materials Science and Engineering. 294(1):012064
Bamidele SA (2019) Number of cars on Nigerian roads hit 11.8m in a year. In: Nairametrics. https://nairametrics.com/2019/03/11/data-on-the-total-number-of-on-nigerian-roads/. Accessed 30 Sep 2020
Marcos-Meson V, Michela A, Solgaardb A et al (2018) Corrosion resistance of steel fibre reinforced concrete – A literature review. Cem Concr Res 103:1–20
Soufeiani L, Raman SN, Jumaat MZB et al (2016) Influences of the volume fraction and shape of steel fibers on fiber reinforced concrete subjected to dynamic loading – A review. Eng Struct 124:405–417
Yoo DY, Banthia N (2016) Mechanical properties of ultra-high-performance fiber-reinforced concrete: A review. Cem Concr Compos 73:267–280
Afroughsabet V, Biolzi L, Ozbakkaloglu T (2016) High-performance fiber-reinforced concrete: a review. J Mater Sci 51:6517–6551
Swolfs Y, Gorbatikh L, Verpoest I (2014) Fibre hybridisation in polymer composites: A review. Compos Part A 67:181–200
Aslani F, Samali B (2014) Constitutive Relationships for Steel Fibre Reinforced Concrete at Elevated Temperatures. Fire Technol 50:1249–1268
Buttignol TE, Sousa JLAO, Bittencourt TN (2017) Ultra high performance fiber reinforced concrete (UHPFRC): A review of material properties and design procedures. IBRACON Mag Struct Mater 10:957–971
Leone M, Centonze G, Colonna D et al (2018) Fiber-reinforced concrete with low content of recycled steel fiber: Shear behavior. Constr Build Mater 161:141–155
Figueiredo FP, Shah AH, Huang S-S et al (2017) Fire Protection of Concrete Tunnel Linings with Waste Tyre Fibres. Procedia Eng 210:472–478
Al-Tikrite A, Hadi MNS (2017) Mechanical properties of reactive powder concrete containing industrial and waste steel fibres at different ratios under compression. Constr Build Mater 154:1024–1034
Sengul O (2016) Mechanical behavior of concretes containing waste steel fibers recovered from scrap tires. Constr Build Mater 122:649–658. https://doi.org/10.1016/j.conbuildmat.2016.06.113
Martinelli E, Caggiano A, Xargay H (2015) An experimental study on the post-cracking behaviour of hybrid industrial/recycled steel fiber-reinforced concrete. Constr Build Mater 94:290–298
Neocleous K, Tlemat H, Pilakoutas K (2006) Design Issues for Concrete Reinforced with Steel Fibers, Including Fibers Recovered from Used Tires. J Mater Civ Eng 18(5):677–685
(2007) TR 63 Guidance for the design of steel-fibre-reinforced concrete. UK
Singh S (2015) Durability properties of high performance fiber reinforced concrete. Thapar University, Patiala
ACI544.2R-89 (1999) ACI 544.2R-89 Measurement of Properties of Fiber Reinforced Concrete
Behbahani HP, Nematollahi B, Farasatpour M (2011) Steel Fiber Reinforced Concrete: A Review”. In: International Conference on Structural Engineering Construction and Management (ICSECM2011). Kandy –Srilanka
Mastali M, Dalvand A (2016) Use of silica fume and recycled steel fibers in self-compacting concrete (SCC). Constr Build Mater. 125:196–209. https://doi.org/10.1016/j.conbuildmat.2016.08.046
Shi C, Wu Z, Xiao J et al (2015) A review on ultra high performance concrete: Part I. Raw materials and mixture design. Constr Build Mater 101:741–751
Amuthakkannan P, Manikandan V, Winowlin JJT, Uthayakumar M (2013) Effect of Fibre Length and Fibre Content on Mechanical Properties of Short Basalt Fibre Reinforced Polymer Matrix Composites. Mater Phys Mech 16:107–117
Bentur A, Mindess S (2007) Fibre Reinforced Cementitious Composites. Second. Taylor & Francis, London
Chanh NV (2004) Steel Fiber Reinforced Concrete. Ho Chi Minh City University of Technology
Daniel JI, Ahmad SH, Arockiasamy M, et al (2002) ACI 544.1R-96 Report on Fiber Reinforced Concrete Reported by ACI Committee 544. Detroit Mechigan
Aghaee K, Yazdi MA, Tsavdaridis KD (2014) Investigation into the mechanical properties of structural lightweight concrete reinforced with waste steel wires. Mag Concr Res. https://doi.org/10.1680/macr.14.00232
Hao Y, Hao H (2013) Dynamic compressive behaviour of spiral steel fibre reinforced concrete in split Hopkinson pressure bar tests. Constr Build Mater. 48:521–532. https://doi.org/10.1016/j.conbuildmat.2013.07.022
Dutt KS, Kumar KV, Kishore IS, Chowdary CM (2016) Influence of Natural Fibers as an Admix in Normal Concrete Mix. Int J Eng Trends Tec3hnology. 35:1–5
Wang W, Chouw N (2017) The behaviour of coconut fibre reinforced concrete ( CFRC ) under impact loading. Constr Build Mater 134:452–461. https://doi.org/10.1016/j.conbuildmat.2016.12.092
Ünal O, Demir F, Uygunoğlu T (2007) Fuzzy logic approach to predict stress–strain curves of steel fiber-reinforced concretes in compression. Build Environ. 42:3589–3595. https://doi.org/10.1016/j.buildenv.2006.10.023
Nehme SG, László R, El MA (2017) Mechanical Performance of Steel Fiber Reinforced Self-compacting Concrete in Panels. Procedia Eng. 196:90–96. https://doi.org/10.1016/j.proeng.2017.07.177
Ghasemi M, Ghasemi MR, Mousavi SR (2019) Studying the fracture parameters and size effect of steel fiber-reinforced self-compacting concrete. Constr Build Mater. 201:447–460. https://doi.org/10.1016/j.conbuildmat.2018.12.172
Syaidathul A, Izni R, Ibrahim S (2012) Mechanical Properties of Recycled Steel Tire Fibres in Concrete. Universiti Teknologi Malaysia
Zhang P, Li Q (2013) Effect of polypropylene fiber on durability of concrete composite containing fly ash and silica fume. Compos Part B Eng. 45:1587–1594. https://doi.org/10.1016/j.compositesb.2012.10.006
Atiş CD, Karahan O (2009) Properties of steel fiber reinforced fly ash concrete. Constr Build Mater. 23:392–399. https://doi.org/10.1016/j.conbuildmat.2007.11.002
Sharda S, Singh M, Singh S (2016) A review on Properties of Fiber Reinforced Cement-based materials. Iosr J Mech Civ Eng. 13:104–112
Mohammadi Y, Singh SP, Kaushik SK (2008) Properties of steel fibrous concrete containing mixed fibres in fresh and hardened state. Constr Build Mater. 22:956–965. https://doi.org/10.1016/j.conbuildmat.2006.12.004
Simões T, Costa H, Dias-da-Costa D, Júlio E (2017) Influence of fibres on the mechanical behaviour of fibre reinforced concrete matrixes. Constr Build Mater. 137:548–556. https://doi.org/10.1016/j.conbuildmat.2017.01.104
Figueiredo A, Ceccato M (2015) Workability Analysis of Steel Fiber Reinforced Concrete Using Slump and Ve-Be Test. Mat Res. 18(6):1284–1290
Manoharan SV, Anandan S (2014) Steel fibre reinforcing characteristics on the size reduction of fly ash based concrete. Adv Civ Eng. https://doi.org/10.1155/2014/217473
Wafa FF (1990) Properties and Applications of Fiber Reinforced Concrete. Eng Sci 2:49–63
Libre NA, Shekarchi M, Mahoutian M, Soroushian P (2011) Mechanical properties of hybrid fiber reinforced lightweight aggregate concrete made with natural pumice. Constr Build Mater. 25:2458–2464. https://doi.org/10.1016/j.conbuildmat.2010.11.058
Chen B, Liu J (2005) Contribution of hybrid fibers on the properties of the high-strength lightweight concrete having good workability. Cem Concr Res. 35:913–917. https://doi.org/10.1016/j.cemconres.2004.07.035
BS.EN.14488–3:2006 (2006) BS EN 14488–3:2006 Testing sprayed concrete. Part 3: Flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens. UK
ASTM.C1018-97 (1997) ASTM C1018-97, Standard Test Method for Flexural Toughness and First-Crack Strength of fiber-Reinforced Concrete (Using Beam with Third-Point Loading),. Pennsylvania, US
ASTM.C1550-05 (2005) ASTM C1550-05, Standard test method for flexural toughness of fiber reinforced concrete (using centrally loaded round panel). Pennsylvania, US
ASTM-C1609/C1609M-05 (2005) ASTM C1609/C1609M-05, Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam with Third-Point Loading). Pennsylvania, US
JSCE-SF4 (1984) JSCE-SF4, Standard for Flexural Strength and Flexural Toughness, Method of Tests for Steel Fiber Reinforced Concrete. Japan
Minelli F, Plizzari GA (2010) Fiber reinforced concrete characterization through round panel test - part I : experimental study. In: 7th International Conference on Fracture Mechanics of Concrete and Concrete Structures (FRAMCOS). pp 1451–1460
Oikonomou-mpegetis S (2013) Behaviour and Desing of Steel Fibre reinforced Concrete Slabs. Imperial College London
Mobasher B (2012) Mechanics of Fibre and Textile Reinforced Cement Composites. CRC Press, London, New York
Stiel T, Karihaloo B, Fehling E (2004) Effect of Casting Direction on the Mechanical Properties of CARDIFRC. In: Schmidt M, Fehling E, Geisenhanslüke C (eds) International Symposium on Ultra High Performance Concrete. Kassel University Press, Kassel, Germany, pp 481–493
Tlemat H (2004) Steel fibres from waste tyres to concrete : testing, modelling and design. The University of Sheffleld
Graeff AG (2011) Long-Term Performance of Recycled Steel Fibre Reinforced Concrete for Pavement Applications. The University of Sheffield, UK
Mastali M, Kinnunen P, Isomoisio H et al (2018) Mechanical and acoustic properties of fiber-reinforced alkali-activated slag foam concretes containing lightweight structural aggregates. Constr Build Mater 187:371–381
Mastali M, Dalvand A, Sattarifard AR et al (2019) A comparison of the effects of pozzolanic binders on the hardened-state properties of high-strength cementitious composites reinforced with waste tire fibers. Compos Part B 162:134–153
Mindess S, Young FJ, Darwin D (2003) Concrete, 2nd ed. Prentice Hall, Pearson Education, Inc. Upper Saddle River, NJ 07458, USA
Khan MI (2003) Isoresponses for strength, permeability and porosity of high performance mortar. Build Environ. 38:1051–1056. https://doi.org/10.1016/S0360-1323(01)00111-1
Claisse PA, Elsayad HI, Shaaban IG (1997) Absorption and Sorptivity of Cover Concrete. J Mater Civ Eng 9:105–110. https://doi.org/10.1061/(ASCE)0899-1561(1997)9:3(105)
Funding
This research did not receive any specific grant from funding agencies in the public, commercial, or not-for-profit sectors.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Awolusi, T.F., Oke, O.L., Atoyebi, O.D. et al. Waste tires steel fiber in concrete: a review. Innov. Infrastruct. Solut. 6, 34 (2021). https://doi.org/10.1007/s41062-020-00393-w
Received:
Accepted:
Published:
DOI: https://doi.org/10.1007/s41062-020-00393-w