Skip to main content
SpringerLink
Log in

Experimental Evaluation of Dynamic Characteristics of Firouzkooh Sand Using Cyclic Triaxial and Bender Element Tests

International Journal of Civil Engineering volume 20, pages 125–138 (2022)Cite this article

Abstract

The main focus of this research is to obtain the dynamic properties of Firouzkooh sand and to study the effect of different factors, including specimen fabric, relative density, and consolidation anisotropy on those parameters. Dynamic properties, including shear modulus and damping ratio, play a significant role in predicting the dynamic response of soil. Having a correct estimate of those parameters in a wide strain range is essential for laboratory research and modeling. Thus, a laboratory testing program comprising of 116 experiments, including bender element and cyclic triaxial tests, was defined to obtain these properties in the strain range of 10–6 up to 10–2. During these tests, effective stress was in the range of 20–500 kPa and the relative density was between 16 and 74.2%. To study the effect of the type of specimen fabric, the sample preparation method was either dry deposition or wet tamping. At the same time, some tests were conducted with anisotropic consolidation. Results are presented in forms of shear modulus and damping ratio in relation to shear strain. Many of the previous studies conducted on different types of sands show consistent results. Additionally, a versatile preliminary empirical model, based on the previously proposed methods, is suggested to predict shear modulus and damping ratio curves of Firouzkooh sand, taking into account the sample fabric and consolidation method.

This is a preview of subscription content, access via your institution.

Access options

Buy single article

Instant access to the full article PDF.

USD 39.95

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
Fig. 14
Fig. 15
Fig. 16
Fig. 17

References

  1. Seed HB, Wong RT, Idriss IM, Tokimatsu K (1986) Moduli and damping factors for dynamic analyses of cohesionless soils. J Geotech Eng 112(11):1016–1032

    Article  Google Scholar 

  2. Sarajpoor S, Kavand A, Zogh P, Ghalandarzadeh A (2020) Dynamic behavior of sand-rubber mixtures based on hollow cylinder tests. Constr Build Mater 251:118948

    Article  Google Scholar 

  3. El Mohtar CS, Drnevich VP, Santagata M, Bobet A (2013) Combined resonant column and cyclic triaxial tests for measuring undrained shear modulus reduction of sand with plastic fines. Geotech Test J 36(4):484–492

    Article  Google Scholar 

  4. Shirley DJ, Hampton LD (1978) Shear-wave measurements in laboratory sediments. J Acoust Soc Am 63(2):607–613

    Article  Google Scholar 

  5. Greening PD, Nash DF (2004) Frequency domain determination of G0 using bender elements. Geotech Test J 27(3):288–294

    Google Scholar 

  6. Arulnathan R, Boulanger RW, Riemer MF (1998) Analysis of bender element tests. Geotech Test J 21(2):120–131

    Article  Google Scholar 

  7. Leong EC, Yeo SH, Rahardjo H (2005) Measuring shear wave velocity using bender elements. Geotech Test J 28(5):488–498

    Google Scholar 

  8. Vucetic M, Dobry R (1991) Effect of soil plasticity on cyclic response. J Geotech Eng 117(1):89–107

    Article  Google Scholar 

  9. Dobry R, Vucetic M (1987) Dynamic properties and seismic response of soft clay deposits. Proc Int Symp Geotech Eng Soft Soils Mexico City 2:51–87

    Google Scholar 

  10. Hardin BO, Drnevich VP (1972) Shear modulus and damping in soils: measurement and parameter effects. J Soil Mech Found Div 98(6):603–624

    Article  Google Scholar 

  11. Kokusho T (1980) Cyclic triaxial test of dynamic soil properties for wide strain range. Soils Found 20(2):45–60

    Article  Google Scholar 

  12. Iwasaki T, Tatsuoka F, Takagi Y (1978) Shear moduli of sands under cyclic torsional shear loading. Soils Found 18(1):39–56

    Article  Google Scholar 

  13. Vucetic M, Dobry R (1988) Cyclic triaxial strain-controlled testing of liquefiable sands. Adv Triaxial Test Soil Rock 475–485

  14. Tatsuoka F, Iwasaki T, Takagi Y (1978) Hysteretic damping of sands under cyclic loading and its relation to shear modulus. Soils Found 18(2):25–40

    Article  Google Scholar 

  15. Kokusho T, Yoshida Y, Esashi Y (1982) Dynamic properties of soft clay for wide strain range. Soils Found 22(4):1–18

    Article  Google Scholar 

  16. Casagrande A, Carillo N (1944) Shear failure of anisotropic soils. Contribut Soil Mech (BSCE) 1941–1953(4):122–135

    Google Scholar 

  17. Zlatovic S, Ishihara K (1997) Normalized behavior of very loose non-plastic soils: effects of fabric. Soils Found 37(4):47–56

    Article  Google Scholar 

  18. Tatsuoka F, Sonoda S, Hara K, Fukushima S, Pradhan TB (1986) Failure and deformation of sand in torsional shear. Soils Found 26(4):79–97

    Article  Google Scholar 

  19. Gu X, Yang J, Huang M (2013) DEM simulations of the small strain stiffness of granular soils: effect of stress ratio. Granular Matter 15(3):287–298

    Article  Google Scholar 

  20. Gu X, Yang J, Huang M, Gao G (2015) Bender element tests in dry and saturated sand: signal interpretation and result comparison. Soils Found 55(5):951–962

    Article  Google Scholar 

  21. Mulilis JP, Arulanandan K, Mitchell JK, Chan CK, Seed HB (1977) Effects of sample preparation on sand liquefaction. J Geotech Eng Div 103(2):91–108

    Article  Google Scholar 

  22. Miura S, Toki S (1982) A sample preparation method and its effect on static and cyclic deformation-strength properties of sand. Soils Found 22(1):61–77

    Article  Google Scholar 

  23. Miura S, Toki S (1984) Anisotropy in mechanical properties and its simulation of sands sampled from natural deposits. Soils Found 24(3):69–84

    Article  Google Scholar 

  24. Vaid YP, Sivathayalan S, Stedman D (1999) Influence of specimen-reconstituting method on the undrained response of sand. Geotech Test J 22(3):187–195

    Article  Google Scholar 

  25. Bayat M, Ghalandarzadeh A (2019) Influence of depositional method on dynamic properties of granular soil. Int J Civ Eng 17(6):907–920

    Article  Google Scholar 

  26. Youd TL, Idriss IM (2001) Liquefaction resistance of soils: summary report from the 1996 NCEER and 1998 NCEER/NSF workshops on evaluation of liquefaction resistance of soils. J Geotech Geoenviron Eng 127(4):297–313

    Article  Google Scholar 

  27. Xiaoming Y, Jing S, Rui S (2005) Effect of consolidation ratios on maximum dynamic shear modulus of sands. Earthq Eng Eng Vib 4(1):59–68

    Article  Google Scholar 

  28. Zhou W, Chen Y, Ma G, Yang L, Chang X (2017) A modified dynamic shear modulus model for rockfill materials under a wide range of shear strain amplitudes. Soil Dyn Earthq Eng 92:229–238

    Article  Google Scholar 

  29. Payan M, Khoshghalb A, Senetakis K, Khalili N (2016) Small-strain stiffness of sand subjected to stress anisotropy. Soil Dyn Earthq Eng 88:143–151

    Article  Google Scholar 

  30. Bayat M, Ghalandarzadeh A (2020) Modified models for predicting dynamic properties of granular soil under anisotropic consolidation. Int J Geomech 20(3):04019197

    Article  Google Scholar 

  31. Lanzo G, Vucetic M, Doroudian M (1997) Reduction of shear modulus at small strains in simple shear. J Geotech Geoenviron Eng 123(11):1035–1042

    Article  Google Scholar 

  32. Li XS, Yang WL (1998) Effects of vibration history on modulus and damping of dry sand. J Geotech Geoenviron Eng 124(11):1071–1081

    Article  Google Scholar 

  33. Jafarzadeh F, Sadeghi H (2012) Experimental study on dynamic properties of sand with emphasis on the degree of saturation. Soil Dyn Earthq Eng 32(1):26–41

    Article  Google Scholar 

  34. Hardin BO, Black WL (1966) Sand stiffness under various triaxial stresses. J Soil Mech Found Div 92(2):27–42

    Article  Google Scholar 

  35. Shibata T, Soelarno DS (1975) Stress-strain characteristics of sands under cyclic loading. Proc Jpn Soc Civ Eng 1975(239):57–65

    Article  Google Scholar 

  36. Yu P, Richart FE Jr (1984) Stress ratio effects on shear modulus of dry sands. J Geotech Eng 110(3):331–345

    Article  Google Scholar 

  37. Laird JP, Stokoe KH (1993) Dynamic properties of remolded and undisturbed soil samples tested at high confining pressures. Geotech Eng Rep GR 93:6

    Google Scholar 

  38. Hardin BO, Richart FE Jr (1963) Elastic wave velocities in granular soils. J Soil Mech Found Div 89(1):33–65

    Article  Google Scholar 

  39. Hardin BO, Drnevich VP (1972) Shear modulus and damping ratio in soils: design equations and curves. J Soil Mech Found Div 96(SM6):1531–1537

    Google Scholar 

  40. Borden RH, Shao L, Gupta A (1996) Dynamic properties of Piedmont residual soils. J Geotech Eng 122(10):813–821

    Article  Google Scholar 

  41. Darendeli MB (2001) Development of a new family of normalized modulus reduction and material damping curves. PhD dissertation, University of Texas at Austin, Austin, Texas

    Google Scholar 

  42. Menq FY (2003) Dynamic properties of sandy and gravelly soils. PhD dissertation, University of Texas at Austin, Austin, Texas

    Google Scholar 

  43. Amir-Faryar B, Aggour MS, McCuen RH (2017) Universal model forms for predicting the shear modulus and material damping of soils. Geomech Geoeng 12(1):60–71

    Article  Google Scholar 

  44. Farahmand K, Lashkari A, Ghalandarzadeh A (2016) Firouzkooh sand: introduction of a benchmark for geomechanical studies. Iran J Sci Technol Trans Civ Eng 40(2):133–148

    Article  Google Scholar 

  45. ASTM D (2013) Standard test method for load controlled cyclic triaxial strength of soil. In: Annual book of ASTM, 11

  46. Ladd RS (1978) Preparing test specimens using undercompaction. Geotech Test J 1(1):16–23

    Article  Google Scholar 

  47. Kumar J, Madhusudhan BN (2010) A note on the measurement of travel times using bender and extender elements. Soil Dyn Earthq Eng 30(7):630–634

    Article  Google Scholar 

  48. Martin GR, Seed HB, Finn WL (1978) Effects of system compliance on liquefaction tests. J Geotech Eng Div 104(4):463–479

    Article  Google Scholar 

  49. ASTM D3999/D3999M-11 (2013) Standard test methods for the determination of the modulus and damping properties of soils using the cyclic triaxial apparatus, West Conshohocken, PA

  50. Zhang J, Andrus RD, Juang CH (2005) Normalized shear modulus and material damping ratio relationships. J Geotech Geoenviron Eng 131(4):453–464

    Article  Google Scholar 

  51. JGS 0541 (2000) Method for cyclic undrained triaxial test on soils. Standards of Japanese Geotechnical Society for Laboratory Shear Tests (English Version). The Japanese Geotechnical Society, Tokyo, pp 54–61

    Google Scholar 

  52. Shi J, Asimaki D (2017) From stiffness to strength: formulation and validation of a hybrid hyperbolic nonlinear soil model for site-response analyses. Bull Seismol Soc Am 107(3):1336–1355

    Article  Google Scholar 

Download references

Funding

This research was not funded by any organizations or companies. All the tests were carried out in the University of Tehran’s Soil Mechanics laboratories without outside financial support.

Author information

Authors and Affiliations

  1. Department of Civil and Environmental Engineering, University of Nevada Reno, 1664 N. Virginia Street, Reno, NV, 89557, USA

    Nima Mojtahedzadeh & Ramin Motamed

  2. School of Civil Engineering, College of Engineering, University of Tehran, P.O. Box: 4563, 11155, Tehran, Iran

    Abbas Ghalandarzadeh

Authors
  1. Nima Mojtahedzadeh
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Abbas Ghalandarzadeh
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Ramin Motamed
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Abbas Ghalandarzadeh.

Ethics declarations

Conflict of Interest

On behalf of all authors, the corresponding author states that there is no conflict of interest.

Rights and permissions

Reprints and Permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Mojtahedzadeh, N., Ghalandarzadeh, A. & Motamed, R. Experimental Evaluation of Dynamic Characteristics of Firouzkooh Sand Using Cyclic Triaxial and Bender Element Tests. Int J Civ Eng 20, 125–138 (2022). https://doi.org/10.1007/s40999-021-00644-6

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s40999-021-00644-6

Keywords

search

Navigation