Skip to main content
SpringerLink
Log in

Inverted Ω-Shaped Antenna for 2.45 GHz ISM Band Wearable Applications

  • Research Paper
  • Published:
Iranian Journal of Science and Technology, Transactions of Electrical Engineering Aims and scope Submit manuscript

Abstract

In this paper, an inverted Ω-shaped antenna is designed and presented for 2.45 GHz ISM band wearable applications. The proposed antenna is designed using Rogers’s 3006 material with thickness of 1.27 mm as substrate. Antenna radiating element is designed by using inverted Ω shape connected to a fork-shaped stub. This microstrip fed antenna maintained a partial ground at back side. The wearable antenna is simulated under different conditions, and the comparative analysis is presented for flat and bended positions in off-body and on-body conditions. The simulation analysis showed that the antenna operates at 2.45 GHz with band width around 260 MHz. At 10 mW input power, the proposed antenna exhibited specific absorption rate (SAR) value at 0.45 and 0.53 W/Kg for flat and bended conditions, when positioned on left arm phantom model. The simulated and measured reflection coefficient data comparison for off- and on-body conditions showed good agreement.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
Fig. 14
Fig. 15
Fig. 16

Similar content being viewed by others

References

  • Abdu A, Zheng H-X, Jabire HA, Wang M (2018) CPW-fed flexible monopole antenna with H and two concentric C slots on textile substrate, backed by EBG for WBAN. Int J RF Microw Comput Aid Eng 28(7):e21505

    Article  Google Scholar 

  • Adam I, RamleeKamarudin M, Rambe AH, NorshakilaHaris HA, Rahim WZ, Wan Muhamad A, Ismail AM, Jusoh M, Yasin MN (2021) Investigation on wearable antenna under different bending conditions for wireless body area network (WBAN) applications. Int J Antennas Propag 2021:1–9

    Article  Google Scholar 

  • Ali Khan MU, Raad R, Tubbal F, Theoharis PI, Liu S, Foroughi J (2021) Bending analysis of polymer-based flexible antennas for wearable, general IoT applications: a review. Polymers 13(357):1–34

    Google Scholar 

  • Ashyap AY, Zainal Abidin Z, Dahlan SH, Majid HA, Saleh G (2018) Metamaterial inspired fabric antenna for wearable applications. Int J RF Microw Comput Aid Eng 29:e21640

    Article  Google Scholar 

  • Bhattacharjee S, Mitra M, Chaudhuri SRB (2017) An effective SAR reduction technique of a compact meander line antenna for wearable applications. Prog Electromagn Res M 55:143–152

    Article  Google Scholar 

  • Gao GP, Hu B, Wang SF, Yang C (2018) Wearable circular ring slot antenna with EBG structure for wireless body area network. IEEE Antennas Wirel Propag Lett 17:434–437

    Article  Google Scholar 

  • Hazarika B, Basu B, Nandi A (2021) Design of dual-band conformal AMC integrated antenna for SAR reduction in WBAN. Prog Electromagn Res C 110:91–102

    Article  Google Scholar 

  • Janapala DK, Nesasudha M, Neebha TM, Kumar R (2019a) Specific absorption rate reduction using metasurface unit cell for flexible polydimethylsiloxane antenna for 2.4 GHz wearable applications. Int J RF Microw Comput Aided Eng 29:1–12

    Article  Google Scholar 

  • Janapala DK, Nesasudha M, Mary Neebha T et al (2021) Design and development of flexible PDMS antenna for UWB-WBAN applications. Wirel Pers Commun 2021:1–17

    Google Scholar 

  • Janapala DK, Nesasudha M (2021) Flexible dielectric resonator antenna using polydimethylsiloxane substrate as dielectric resonator for breast cancer diagnostics. In: Gupta D, Khanna A, Bhattacharyya S, Hassanien AE, Anand S, Jaiswal A (eds) International Conference on Innovative Computing and Communications Advances in Intelligent Systems and Computing, Springer: Heidelberg

  • Janapala DK, Nesasudha M, Neebha TM, Kumar R (2019b) Flexible PDMS antenna backed with metasurface for 2.4GHz wearable applications. IEEE 1st International Conference on Energy, Systems and Information Processing (ICESIP)

  • Kamalaveni A, Ganesh MM (2016) A compact TRM antenna with high impedance surface for SAR reduction at 1800 MHz. AEU-Int J Electron C 70(9):1192–1198

    Article  Google Scholar 

  • Kiani S, Rezaei P, Fakhr M (2021) A CPW-fed wearable antenna at ISM band for biomedical and WBAN applications. Wirel Netw 27:735–745

    Article  Google Scholar 

  • Mohd Hussin EFN, Soh PJ, Jamlos MF, Lago H, Al-Hadi AA (2019) Wideband microstrip-based wearable antenna backed with full ground plane. Int J RF Microw Comput Aid Eng 29:e21739

    Article  Google Scholar 

  • Sankaralingam S, Gupta B (2010) Development of textile antennas for body wearable applications and investigations on their performance under bent conditions. Prog Electromagn Res B 22:53–71

    Article  Google Scholar 

  • Seman FC, Ramadhan F, Ishak NS, Yuwono R, Abidin ZZ, Dahlan SH, Shah SM, Ashyap AYI (2019) Performance evaluation of a star-shaped patch antenna on polyimide film under various bending conditions for wearable applications. Prog Electromagn Res Lett 85:125–130

    Article  Google Scholar 

  • Tamim AM, Faruque MRI, Khandaker MU, Islam MT, Bradley DA (2020) Electromagnetic radiation reduction using novel metamaterial for cellular applications. Radiat Phys Chem 178:108976

    Article  Google Scholar 

  • Yin B, Ye M, Yu Y (2021) A novel compact wearable antenna design for ISM band. Prog Electromagn Res C 107:97–111

    Article  Google Scholar 

Download references

Funding

The authors did not receive support from any organization for the submitted work.

Author information

Authors and Affiliations

  1. Centurion University of Technology and Management, Vizianagaram, Andhra Pradesh, India

    Srilatha Gundapaneni, G. S. N. Raju & Antony Sunny Dayal Pendurthi

  2. Department of ECE, SIR CRRCOE, Eluru, Andhra Pradesh, India

    Srilatha Gundapaneni

Authors
  1. Srilatha Gundapaneni
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. G. S. N. Raju
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Antony Sunny Dayal Pendurthi
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Srilatha Gundapaneni.

Ethics declarations

Conflict of interest

The authors have no competing interests to declare that are relevant to the content of this article.

Rights and permissions

Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Gundapaneni, S., Raju, G.S.N. & Pendurthi, A.S.D. Inverted Ω-Shaped Antenna for 2.45 GHz ISM Band Wearable Applications. Iran J Sci Technol Trans Electr Eng 47, 1177–1186 (2023). https://doi.org/10.1007/s40998-023-00596-8

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s40998-023-00596-8

Keywords

Search

Navigation