Abstract
This paper presents a method to establish a mathematical model of non-circular gear tooth surface, which can avoid the issues of low accuracy and low efficiency in extracting tooth surface of previous non-circular gear tooth surface design methods. A new tooth envelope method is proposed, where the gear inserting knife rotates only on a fixed axis, while the non-circular gear rotates and translates in the horizontal plane. By utilizing the conjugate theory and coordinate transformation theory, the coordinate system, meshing equation, and tooth surface equation of the non-circular gear are obtained, and the 3D point cloud of the tooth surface is programmed. Finally, the mathematical model of the tooth surface proposed in this paper is used to establish multiple pairs of non-circular gears with different orders, and the correctness and generality of the method are verified by comparing the simulated and experimental transmission ratio with the theoretical transmission ratio in the test.
Similar content being viewed by others
References
Bair BW (2002) Computerized tooth profile generation of elliptical gears manufactured by shaper cutters. J Mater Process Tech 122(2–3):139–147. https://doi.org/10.1016/S0924-0136(01)01242-0
Chang SL, Tsay CB (1998) Computerized tooth profile generation and undercut analysis of noncircular gears manufactured with shaper cutters. J Mech Des 120(1):92–99. https://doi.org/10.1115/1.2826682
Chen CF, Tsay CB (2004) Computerized tooth profile generation and analysis of characteristics of elliptical gears with circular-arc teeth. J Mater Process Technol 148(2):226–234. https://doi.org/10.1016/j.jmatprotec.2003.07.011
Chen J, Ye J, Wang Y, Sun Y, Xia X, He X (2019) Design, Modeling and experiment of a novel synchronous belt drive with noncircular pulleys. Iran J Sci Technol Trans Mech Eng 44(8):533–542. https://doi.org/10.1007/s40997-019-00297-w
Figliolini G, Angeles J (2003) The synthesis of elliptical gears generated by shaper-cutters. ASME J Mech Des 125(4):793–801. https://doi.org/10.1115/1.1631573
Han J, Li D, Tian X, Xia L (2020) Linkage model and interpolation analysis of helical non-circular gear hobbing. J Braz Soc Mech Sci Eng 42(11):1–13. https://doi.org/10.1007/s40430-020-02663-1
Han J, Li D, Xia L, Tian X (2019) Analytical study on tooth profile of non-circular gear based ON hobbing process simulation. In international manufacturing science and engineering conference, american society of mechanical engineers 58752, V002T003A025. 0.1115/MSEC2019-2729
Li D, Liu Y, Gong J, Wang T (2021) Design of a noncircular planetary gear mechanism for hydraulic motor. Math Probl Eng 2021(1–9):8. https://doi.org/10.1155/2021/5510521
Lin C, Wu X (2019) Calculation and characteristic analysis of tooth width of eccentric helical curve-face gear. Iran J Sci Technol Trans Mech Eng 43(4):781–797. https://doi.org/10.1007/s40997-018-0239-9
Lin C, Xia X, Li P (2018) Geometric design and kinematics analysis of coplanar double internal meshing non-circular planetary gear train. Adv Mech Eng. https://doi.org/10.1177/1687814018818910
Litvin FL, Gonzalez-Perez I, Yukishima K, Fuentes A, Hayasaka K (2007) Generation of planar and helical elliptical gears by application of rack-cutter, hob, and shaper. Comput Method Appl Mech Eng 196(41–44):4321–4336. https://doi.org/10.1016/j.cma.2007.05.003
Liu Y, Han J, Xia L, Tian X (2012) Hobbing strategy and performance analyses of linkage models for non-circular helical gears based on four-axis linkage. Strojniški Vestnik-J Mech Eng 58(12):701–708. https://doi.org/10.5545/sv-jme.2012.524
Lyashkov AA, Panchuk KL, Khasanova IA (2018) Automated geometric and computer-aided non-circular gear formation modeling. J Phys: Conf Ser 1050(1):012049. https://doi.org/10.1088/1742-6596/1050/1/012049
Lyashkov AA, Reinhard AJ, Murashev GE (2019) Geometric and computer modeling of forming the gear wheels with elliptical centroid. J Phys Conf Ser 1260(11):112018. https://doi.org/10.1088/1742-6596/1260/11/112018
Maláková S, Urbanský M, Fedorko G, Molnár V, Sivak S (2021) Design of geometrical parameters and kinematical characteristics of a non-circular gear transmission for given parameters. Appl Sci 11(3):1000. https://doi.org/10.3390/app11031000
Modler KH, Lovasz E, Baer GF, Neumann R, Perju D, Perner M, Margineanu D (2009) General method for the synthesis of geared linkages with non-circular gears. Mech Mach Theory 44(4):726–738. https://doi.org/10.1016/j.mechmachtheory.2008.05.006
Shi Z, Li S (2022) Nonlinear dynamics of hypoid gear with coupled dynamic mesh stiffness. Mech Mach Theory 168:104589. https://doi.org/10.1016/j.mechmachtheory.2021.104589
Terada H, Zhu Y, Suzuki M, Cheng C, Takahashi R (2012) Developments of a knee motion assist mechanism for wearable robot with a non-circular gear and grooved cams. Mech Mach Sci 3:69–76. https://doi.org/10.1007/978-94-007-2727-4_6
Thai NH, Trung NT (2022) A novel curve for the generation of the non-circular gear tooth profile. Int J Eng 35(5):1024–1036. https://doi.org/10.5829/IJE.2022.35.05B.18
Xia L, Liu Y, Li D, Han J (2013) A linkage model and applications of hobbing non-circular helical gears with axial shift of hob. Mech Mach Theory 70:32–44. https://doi.org/10.1016/j.mechmachtheory.2013.07.002
Xiao X, Chen Y, Xie X, Shao Y (2021) A miniature non-circular line gear with pure-rolling contact. J Adv Mech Des Syst Manuf. https://doi.org/10.1299/jamdsm.2021jamdsm0071
Željko Vrcan; Jelena Stefanović-Marinović; Milan Tica; Sanjin Troha (2022) Research into the properties of selected single speed two-carrier planetary gear train. J Appl Comput Mech 8(2):699–709. https://doi.org/10.22055/jacm.2021.39143.3358
Zheng F, Hua L, Han X (2016a) The mathematical model and mechanical properties of variable center distance gears based on screw theory. Mech Mach Theory 101:116–139. https://doi.org/10.1016/j.mechmachtheory.2016.03.005
Zheng F, Hua L, Han X, Li B, Chen D (2016b) Linkage model and manufacturing process of shaping non-circular gears. Mech Mach Theory 96:192–212. https://doi.org/10.1016/j.mechmachtheory.2015.09.010
Funding
This research gained sponsorship from The National Natural Science Foundation of China (Grant No.52265008), Wenzhou Science and Technology Bureau Basic Industrial Science and Technology Project(G20220011).
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
The authors declare that they have no conflict of interest.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Li, D., Huang, C., Liu, Y. et al. A Generalized Algorithm and Simulation Verification of Non-circular Gear Tooth Surface Data Points. Iran J Sci Technol Trans Mech Eng (2024). https://doi.org/10.1007/s40997-024-00761-2
Received:
Accepted:
Published:
DOI: https://doi.org/10.1007/s40997-024-00761-2