Abstract
The current study investigates the effect of different types of holes on fatigue crack propagation in typical edge-cracked specimens. The methodology is based on numerical procedure involving level set method in conjunction with extended finite element method (XFEM). Typical enrichment functions have been invoked at appropriate nodes to introduce the effect of cracks and hole geometries into the mathematical models. Generalised Paris law has been utilised for the assessment of fatigue life of cracked specimens. Indigenous codes on XFEM have been developed using MATLAB to solve various crack growth problems, and validation of the codes has been established against results already available for some benchmark problems. The study aims to investigate the effect of size and position of different types of hole geometries on fatigue life in an edge-cracked rectangular plate. Appropriate mathematical models were developed from the crack growth data generated in the current study to estimate the fatigue life of the cracked component containing various types of holes.
Similar content being viewed by others
References
Aliabadi MH, Brebbia CA (1998) Boundary element formulations in fracture mechanics: a review. Trans Eng Sci 17:589–598
Allaire G, Jouve F, Toader AM (2002) A level-set method for shape optimization. C R Math 334:1125–1130. https://doi.org/10.1016/S1631-073X(02)02412-3
Banks-Sills L, Motola Y, Shemesh L (2008) The M-integral for calculating intensity factors of an impermeable crack in a piezoelectric material. Eng Fract Mech 75:901–925. https://doi.org/10.1016/j.engfracmech.2007.05.009
Belytschko T, Black T (1999) Elastic crack growth in finite elements with minimal remeshing. Int J Numer Methods Eng 45:601–620. https://doi.org/10.1002/(SICI)1097-0207(19990620)45:5%3c601::AID-NME598%3e3.0.CO;2-S
Belytschko T, Fleming M (1999) Smoothing, enrichment and contact in the element-free Galerkin method. Comput Struct 71:173–195. https://doi.org/10.1016/S0045-7949(98)00205-3
Belytschko T, Krongauz Y, Organ D et al (1996) Meshless methods: an overview and recent developments. Comput Methods Appl Mech Eng 139:3–47. https://doi.org/10.1016/S0045-7825(96)01078-X
Belytschko T, Moës N, Usui S, Parimi C (2001) Arbitrary discontinuities in finite elements. Int J Numer Methods Eng 50:993–1013. https://doi.org/10.1002/1097-0207(20010210)50:4%3c993::AID-NME164%3e3.0.CO;2-M
Bhardwaj G, Singh IV, Mishra BK (2013) Numerical simulation of plane crack problems using extended isogeometric analysis. Procedia Eng 64:661–670. https://doi.org/10.1016/j.proeng.2013.09.141
Bhardwaj G, Singh IV, Mishra BK, Bui TQ (2015) Numerical simulation of functionally graded cracked plates using NURBS based XIGA under different loads and boundary conditions. Compos Struct 126:347–359. https://doi.org/10.1016/j.compstruct.2015.02.066
Bordas SPA, Conley JG, Moran B et al (2007) A simulation-based design paradigm for complex cast components. Eng Comput 23:25–37. https://doi.org/10.1007/s00366-006-0030-1
Bouhala L, Shao Q, Koutsawa Y et al (2013) An XFEM crack-tip enrichment for a crack terminating at a bi-material interface. Eng Fract Mech 102:51–64. https://doi.org/10.1016/j.engfracmech.2013.02.023
Chen S, Merriman B, Osher S, Smereka P (1997) A simple level set method for solving stefan problems. J Comput Phys 135:8–29. https://doi.org/10.1006/jcph.1997.5721
Chen Y, Lee JD, Eskandarian A (2006) Meshless methods in solid mechanics. Springer
De Lorenzis L, Wriggers P, Zavarise G (2012) A mortar formulation for 3D large deformation contact using NURBS-based isogeometric analysis and the augmented Lagrangian method. Comput Mech 49:1–20. https://doi.org/10.1007/s00466-011-0623-4
Dolbow J, Moës N, Belytschko T (2000) Discontinuous enrichment in finite elements with a partition of unity method. Finite Elem Anal Des 36:235–260. https://doi.org/10.1016/S0168-874X(00)00035-4
Duarte CA, Babuška I, Oden JT (2000) Generalized finite element methods for three-dimensional structural mechanics problems. Comput Struct 77:215–232. https://doi.org/10.1016/S0045-7949(99)00211-4
Duflot M, Nguyen-Dang H (2004) A meshless method with enriched weight functions for fatigue crack growth. Int J Numer Methods Eng 59:1945–1961. https://doi.org/10.1002/nme.948
Eberhard P, Gaugele T (2013) Simulation of cutting processes using mesh-free Lagrangian particle methods. Comput Mech 51:261–278. https://doi.org/10.1007/s00466-012-0720-z
Erdogan F, Sih GC (1963) On the crack extension in plates under plane loading and transverse shear. J Fluids Eng Trans ASME 85:519–525. https://doi.org/10.1115/1.3656897
Fajdiga G, Sraml M (2009) Fatigue crack initiation and propagation under cyclic contact loading. Eng Fract Mech 76:1320–1335. https://doi.org/10.1016/j.engfracmech.2009.02.005
Gadala MS, Wang J (1999) Simulation of metal forming processes with finite element methods. Int J Numer Methods Eng 44:1397–1428. https://doi.org/10.1002/(SICI)1097-0207(19990410)44:10%3c1397::AID-NME496%3e3.0.CO;2-3
Gajjar M, Pathak H, Kumar S (2020) Elasto-plastic fracture modelling for crack interaction with XFEM. Trans Indian Inst Met 73:1679–1687
Geniaut S, Galenne E (2012) A simple method for crack growth in mixed mode with X-FEM. Int J Solids Struct 49:2094–2106. https://doi.org/10.1016/j.ijsolstr.2012.04.015
Giner E, Sukumar N, Denia FD, Fuenmayor FJ (2008a) Extended finite element method for fretting fatigue crack propagation. Int J Solids Struct 45:5675–5687. https://doi.org/10.1016/j.ijsolstr.2008.06.009
Giner E, Sukumar N, Fuenmayor FJ, Vercher A (2008b) Singularity enrichment for complete sliding contact using the partition of unity finite element method. Int J Numer Methods Eng 76:1402–1418. https://doi.org/10.1002/nme.2359
Gosz M, Moran B (2002) An interaction energy integral method for computation of mixed-mode stress intensity factors along non-planar crack fronts in three dimensions. Eng Fract Mech 69:299–319. https://doi.org/10.1016/S0013-7944(01)00080-7
Gu YT, Wang QX, Lam KY (2007) A meshless local Kriging method for large deformation analyses. Comput Methods Appl Mech Eng 196:1673–1684. https://doi.org/10.1016/j.cma.2006.09.017
Harmain GA, Provan JW, Harmain GA, Provan JW et al (1997) Fatigue crack-tip plasticity revisited—the issue of shape addressed. Theor Appl Fract Mech 26:63–79. https://doi.org/10.1016/S0167-8442(96)00036-5
Hosseini-Toudeshky H, Saber M, Mohammadi B (2009) Finite element crack propagation of adhesively bonded repaired panels in general mixed-mode conditions. Finite Elem Anal Des 45:94–103. https://doi.org/10.1016/j.finel.2008.07.010
Jameel A, Harmain GA (2016) Modeling and numerical simulation of fatigue crack growth in cracked specimens containing material discontinuities. Strength Mater 48:294–307. https://doi.org/10.1007/s11223-016-9765-0
Jameel A, Harmain GA (2019a) Extended iso-geometric analysis for modeling three-dimensional cracks. Mech Adv Mater Struct 26:915–923. https://doi.org/10.1080/15376494.2018.1430275
Jameel A, Harmain GA (2019b) A coupled FE-IGA technique for modeling fatigue crack growth in engineering materials. Mech Adv Mater Struct 26:1764–1775. https://doi.org/10.1080/15376494.2018.1446571
Jameel A, Harmain GA (2019c) Fatigue crack growth analysis of cracked specimens by the coupled finite element-element free Galerkin method. Mech Adv Mater Struct 26:1343–1356. https://doi.org/10.1080/15376494.2018.1432800
Jameel A, Harmain GA (2020a) Large deformation in bi-material components by XIGA and coupled FE-IGA techniques. Mech Adv Mater Struct. https://doi.org/10.1080/15376494.2020.1799120
Jameel A, Harmain GA (2020b) Effect of material irregularities on fatigue crack growth by enriched techniques. Int J Comput Methods Eng Sci Mech 21:109–133. https://doi.org/10.1080/15502287.2020.1772902
Kanth SA, Harmain GA, Jameel A (2018) Modeling of nonlinear crack growth in steel and aluminum alloys by the element free Galerkin method. Mater Today Proc 5:18805–18814. https://doi.org/10.1016/j.matpr.2018.06.227
Kanth SA, Lone AS, Harmain GA, Jameel A (2019a) Modeling of embedded and edge cracks in steel alloys by XFEM. Mater Today Proc 26:814–818. https://doi.org/10.1016/j.matpr.2019.12.423
Kanth SA, Lone AS, Harmain GA, Jameel A (2019b) Elasto plastic crack growth by XFEM: a review. Mater Today Proc 18:3472–3481. https://doi.org/10.1016/j.matpr.2019.07.275
Kanth SA, Harmain GA, Jameel A (2021) Investigation of fatigue crack growth in engineering components containing different types of material irregularities by XFEM. Mech Adv Mater Struct. https://doi.org/10.1080/15376494.2021.1907003
Kim JH, Paulino GH (2003) T-stress, mixed-mode stress intensity factors, and crack initiation angles in functionally graded materials: a unified approach using the interaction integral method. Comput Methods Appl Mech Eng. https://doi.org/10.1016/S0045-7825(02)00652-7
Kim JH, Paulino GH (2005) Consistent formulations of the interaction integral method for fracture of functionally graded materials. J Appl Mech Trans ASME 72:351–364. https://doi.org/10.1115/1.1876395
Kim DW, Liu WK, Yoon YC et al (2007) Meshfree point collocation method with intrinsic enrichment for interface problems. Comput Mech 40:1037–1052. https://doi.org/10.1007/s00466-007-0162-1
Kumar S, Singh IV, Mishra BK (2015) A homogenized XFEM approach to simulate fatigue crack growth problems. Comput Struct 150:1–22. https://doi.org/10.1016/j.compstruc.2014.12.008
Leonel ED, Venturini WS (2011) Non-linear boundary element formulation applied to contact analysis using tangent operator. Eng Anal Bound Elem 35:1237–1247. https://doi.org/10.1016/j.enganabound.2011.06.005
Leonel ED, Chateauneuf A, Venturini WS (2012) Probabilistic crack growth analyses using a boundary element model: applications in linear elastic fracture and fatigue problems. Eng Anal Bound Elem 36:944–959. https://doi.org/10.1016/j.enganabound.2011.12.016
Li YD, Lee KY (2010) Collinear unequal crack series in magnetoelectroelastic materials: mode I case solved via new real fundamental solutions. Eng Fract Mech 77:2772–2790. https://doi.org/10.1016/j.engfracmech.2010.05.002
Ling FF (2006) Mechanical engineering series. Springer, New York
Liu GR, Tu ZH (2002) An adaptive procedure based on background cells for meshless methods. Comput Methods Appl Mech Eng 191:1923–1943. https://doi.org/10.1016/S0045-7825(01)00360-7
Lone AS, Kanth SA, Harmain GA, Jameel A (2019a) XFEM modeling of frictional contact between elliptical inclusions and solid bodies. Mater Today Proc 26:819–824. https://doi.org/10.1016/j.matpr.2019.12.424
Lone AS, Kanth SA, Jameel A, Harmain GA (2019b) A state of art review on the modeling of contact type nonlinearities by extended finite element method. Mater Today Proc 18:3462–3471
Lone AS, Harmain GA, Jameel A (2022) Enriched element free Galerkin method for solving frictional contact between solid bodies. Mech Adv Mater Struct. https://doi.org/10.1080/15376494.2022.2092791
Melenk JM, Babuška I (1996) The partition of unity finite element method: basic theory and applications. Comput Methods Appl Mech Eng 139:289–314. https://doi.org/10.1016/S0045-7825(96)01087-0
Miranda ACO, Meggiolaro MA, Castro JTP et al (2003) Fatigue life and crack path predictions in generic 2D structural components. Eng Fract Mech 70:1259–1279. https://doi.org/10.1016/S0013-7944(02)00099-1
Moës N, Dolbow J, Belytschko T (1999) A finite element method for crack growth without remeshing. Int J Numer Methods Eng 46:131–150. https://doi.org/10.1002/(SICI)1097-0207(19990910)46:1%3c131::AID-NME726%3e3.0.CO;2-J
Noda NA, Oda K (1992) Numerical solutions of the singular integral equations in the crack analysis using the body force method. Int J Fract 58:285–304. https://doi.org/10.1007/BF00048950
Obata M, Nasser SN, Goto Y (1989) Branched cracks in anisotropic elastic solids. J Appl Mech Trans ASME 56:858–864. https://doi.org/10.1115/1.3176182
Oden JT, Duarte CAM, Zienkiewicz OC (1998) A new cloud-based hp finite element method. Comput Methods Appl Mech Eng 153:117–126. https://doi.org/10.1016/S0045-7825(97)00039-X
Osher S, Fedkiw RP (2001) Level set methods: an overview and some recent results. J Comput Phys 169:463–502. https://doi.org/10.1006/jcph.2000.6636
Osher S, Sethian JA (1988) Fronts propagating with curvature-dependent speed: algorithms based on Hamilton–Jacobi formulations. J Comput Phys 79:12–49. https://doi.org/10.1016/0021-9991(88)90002-2
Palaniswamy H, Ngaile G, Altan T (2004) Finite element simulation of magnesium alloy sheet forming at elevated temperatures. J Mater Process Technol 146:52–60. https://doi.org/10.1016/S0924-0136(03)00844-6
Panzeca T, Salerno M, Terravecchia S, Zito L (2008) The symmetric boundary element method for unilateral contact problems. Comput Methods Appl Mech Eng 197:2667–2679. https://doi.org/10.1016/j.cma.2007.03.026
Pathak H, Singh A, Singh IV (2013) Fatigue crack growth simulations of 3-D problems using XFEM. Int J Mech Sci 76:112–131. https://doi.org/10.1016/j.ijmecsci.2013.09.001
Portela A, Aliabadi MH, Rooke DP (1993) Dual boundary element incremental analysis of crack propagation. Comput Struct 46:237–247. https://doi.org/10.1016/0045-7949(93)90189-K
Rabczuk T, Zi G, Bordas S, Nguyen-Xuan H (2010) A simple and robust three-dimensional cracking-particle method without enrichment. Comput Methods Appl Mech Eng 199:2437–2455. https://doi.org/10.1016/j.cma.2010.03.031
Rao BN, Kuna M (2008) Interaction integrals for fracture analysis of functionally graded piezoelectric materials. Int J Solids Struct 45:5237–5257. https://doi.org/10.1016/j.ijsolstr.2008.05.020
Rao BN, Rahman S (2001) A coupled meshless-finite element method for fracture analysis of cracks. Int J Press Vessel Pip 78:647–657. https://doi.org/10.1016/S0308-0161(01)00076-X
Rao BN, Rahman S (2004) An enriched meshless method for non-linear fracture mechanics. Int J Numer Methods Eng 59:197–223. https://doi.org/10.1002/nme.868
Raza A, Pathak H, Talha M (2022) Influence of microstructural defects on free flexural vibration of cracked functionally graded plates in thermal medium using XFEM. Mech Based Des Struct Mach. https://doi.org/10.1080/15397734.2022.2066544
Richardson CL, Hegemann J, Sifakis E, et al (2009) An XFEM method for modeling geometrically elaborate crack propagation in brittle materials. https://doi.org/10.1002/nme.3211
Satyanarayana S, Melkote SN (2004) Finite element modeling of fixture-workpiece contacts: single contact modeling and experimental verification. Int J Mach Tools Manuf 44:903–913. https://doi.org/10.1016/j.ijmachtools.2004.02.010
Schreppers GJMA, Brekelmans WAM, Sauren AAHJ (1992) A finite element formulation of the large sliding contact. Int J Numer Methods Eng 35:133–143. https://doi.org/10.1002/nme.1620350109
Sethian JA (2001) Evolution, implementation, and application of level set and fast marching methods for advancing fronts. J Comput Phys 169:503–555. https://doi.org/10.1006/jcph.2000.6657
Shi J, Ma W, Li N (2013) Extended meshless method based on partition of unity for solving multiple crack problems. Meccanica 48:2263–2270. https://doi.org/10.1007/s11012-013-9743-6
Shivakumar KN, Raju IS (1992) An equivalent domain integral method for three-dimensional mixed-mode fracture problems. Eng Fract Mech 42:935–959. https://doi.org/10.1016/0013-7944(92)90134-Z
Simpson R, Trevelyan J (2011) A partition of unity enriched dual boundary element method for accurate computations in fracture mechanics. Comput Methods Appl Mech Eng 200:1–10. https://doi.org/10.1016/j.cma.2010.06.015
Singh IV, Mishra BK, Bhattacharya S, Patil RU (2012) The numerical simulation of fatigue crack growth using extended finite element method. Int J Fatigue 36:109–119. https://doi.org/10.1016/j.ijfatigue.2011.08.010
Singh IV, Bhardwaj G, Mishra BK (2015) A new criterion for modeling multiple discontinuities passing through an element using XIGA. J Mech Sci Technol 29:1131–1143. https://doi.org/10.1007/s12206-015-0225-8
Spangenberger AG, Lados DA (2020) Extended finite element modeling of fatigue crack growth microstructural mechanisms in alloys with secondary/reinforcing phases: model development and validation. Comput Mech. https://doi.org/10.1007/s00466-020-01921-2
Stolarska M, Chopp DL, Moes N, Belytschko T (2001) Modelling crack growth by level sets in the extended finite element method. Int J Numer Methods Eng 51:943–960. https://doi.org/10.1002/nme.201
Sukumar N, Chopp DL, Moës N, Belytschko T (2001) Modeling holes and inclusions by level sets in the extended finite-element method. Comput Methods Appl Mech Eng 190:6183–6200. https://doi.org/10.1016/S0045-7825(01)00215-8
Sukumar N, Dolbow J, Devan A et al (2005) Meshless methods and partition of unity finite elements. Int J Form Process 8:409–427. https://doi.org/10.3166/ijfp.8.409-427
Verma R, Kumar P, Jayaganthan R, Pathak H (2022) Extended finite element simulation on tensile, fracture toughness and fatigue crack growth behaviour of additively manufactured Ti6Al4V alloy. Theor Appl Fract Mech 117:103163
Vikram N, Kumar R (2013) Review on fatigue-crack growth and finite element method. Int J Sci Eng Res 4:833–843
Wang SS, Yau JF, Corten HT (1980) A mixed-mode crack analysis of isotropic solids using conservation laws of elasticity. Int J Fract 16:247–259. https://doi.org/10.1007/BF00013381
Wang J, Gao JX, Guo WL, Shen YP (1998) Effects of specimen thickness, hardening and crack closure for the plastic strip model. Theor Appl Fract Mech 29:49–57. https://doi.org/10.1016/S0167-8442(98)00015-9
Wen PH, Aliabadi MH, Young A (1999) Dual boundary element methods for three-dimensional dynamic crack problems. J Strain Anal Eng Des 34:373–394. https://doi.org/10.1177/030932479903400601
Xing C, Wang Y, Waisman H (2019) Fracture analysis of cracked thin-walled structures using a high-order XFEM and Irwin’s integral. Comput Struct 212:1–19. https://doi.org/10.1016/j.compstruc.2018.10.010
Yazid A, Abdelkader N, Abdelmadjid H (2009) A state-of-the-art review of the X-FEM for computational fracture mechanics. Appl Math Model 33:4269–4282. https://doi.org/10.1016/j.apm.2009.02.010
Yu H, Wu L, Guo L et al (2009) Investigation of mixed-mode stress intensity factors for nonhomogeneous materials using an interaction integral method. Int J Solids Struct 46:3710–3724. https://doi.org/10.1016/j.ijsolstr.2009.06.019
Yu H, Wu L, Guo L et al (2010) Interaction integral method for the interfacial fracture problems of two nonhomogeneous materials. Mech Mater 42:435–450. https://doi.org/10.1016/j.mechmat.2010.01.001
Yvonnet J, Le QH, He QC (2008) An XFEM/level set approach to modelling surface/interface effects and to computing the size-dependent effective properties of nanocomposites. Comput Mech 42:119–131. https://doi.org/10.1007/s00466-008-0241-y
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Kanth, S.A., Harmain, G.A. & Jameel, A. Assessment of Fatigue Life in Presence of Different Hole Geometries by X-FEM. Iran J Sci Technol Trans Mech Eng 47, 1145–1159 (2023). https://doi.org/10.1007/s40997-022-00569-y
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s40997-022-00569-y