Abstract
Effect of eccentricity on jets delivered from a primary nozzle surrounded by secondary flow is studied experimentally. The eccentricity is achieved by offsetting the annular spacing of the co-flow passage, surrounding the center nozzle generating the primary jet. This is achieved by making a base plate with its center which is offset by 2 mm in the downward direction with the center of inner nozzle. The studies have been carried out in possible flow regimes of jet exiting from a convergent nozzle like subsonic and correctly and underexpanded sonic conditions. The experiments were carried out for primary nozzle exit Mach numbers of 0.3, 0.5, 0.8 and 1.0 at correct expansion. The studies in underexpanded regime were conducted for nozzle pressure ratios (NPR) of 3 and 4. The eccentricity in the co-flow jet leads to 38% reduction in the supersonic core length at NPR 3 and 60% at NPR 4 in comparison with concentric co-flow configuration. The eccentricity also leads to early mixing of co-flowing jet.
Similar content being viewed by others
Abbreviations
- D :
-
Exit diameter of primary nozzle
- M e :
-
Mach number at the exit of primary nozzle
- M :
-
Mach number calculated from pressure
- NPR:
-
Nozzle pressure ratio
- P 0 :
-
Stagnation pressure
- P a :
-
Ambient pressure
- P t :
-
Pitot pressure
- X :
-
Coordinate along jet axis
- Y :
-
Coordinate along unsymmetrical axis
- Z :
-
Coordinate along symmetrical axis
References
Gopinath S, Sundararaj M, Elangovan S, Rathakrishnan E (2015) Mixing characteristics of elliptical and rectangular sonic jets with swirling co-flow. Int J Turbo Jet Eng 32(1):73–83. https://doi.org/10.1515/tjj-2014-0015
Lovaraju P, Rathakrishnan E (2011) Experimental studies on co-flowing subsonic and sonic jets. Flow Turbul Combust 87:115–132. https://doi.org/10.1007/s10494-011-9332-5
Murakami E, Papamoschou D (1986) Mixing layer characteristics of coaxial supersonic jets. AIAA Pap 86:0162. https://doi.org/10.2514/6.2000-2060
Rathakrishanan E (2017) Instrumentation, measurements and experiments in fluids. CRC Press, Boca Raton. https://doi.org/10.1201/9781315365619
Rathakrishanan E (2019) Applied gas dynamics. Wiley-Blackwell, New Jersy. https://doi.org/10.1002/9781119500377
Satyajith D, Rathakrishnan E (2018) Experimental study of supersonic co-flowing jet. Proc Inst Mech Eng Part G 233(4):1237–1249. https://doi.org/10.1177/0954410017749866
Sharma H, Vashishtha A, Lovaraju P, Rathakrishnan E (2008) Experimental study of overexpanded co-flowing jets. Aeronaut J 112(1135):357–546. https://doi.org/10.1017/S0001924000002499
Srinivasarao T, Lovaraju P, Rathakrishnan E (2012) Effect of co-flow on near field shock structure. J Fluids Eng 134(7):0745015. https://doi.org/10.1115/1.4006911
Srinivasarao T, Lovaraju P, Rathakrishnan E (2014) Characteristics of co-flow jets from orifices. Int J Turbo Jet Eng 31(2):141–148. https://doi.org/10.1515/tjj-2013-0040
Srinivasarao T, DakshinaMurthy I, Lovaraju P, Rathakrishnan E (2017) Effect of inner nozzle lip thickness on co-flow jet characteristics. Int J Turbo Jet Eng 34(3):287–293. https://doi.org/10.1515/tjj-2016-0004
Funding
The authors express their acknowledgements to the University Grants Commission (UGC), India for their financial support through the grant number MRP-7049/16 (SERO/UGC).
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
The authors declare no potential conflicts of interest with respect to the research, authorship and/or publication of this article.
Rights and permissions
About this article
Cite this article
Inturi, D.M., Lovaraju, P., Tanneeru, S.R. et al. Effect of Eccentricity on Co-flow Jet Characteristics. Iran J Sci Technol Trans Mech Eng 46, 407–420 (2022). https://doi.org/10.1007/s40997-021-00444-2
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s40997-021-00444-2