Abstract
In this paper, innovative design of an Inertial Ball Screw Harvester (IBSH) has been proposed. In comparison with the conventional devices, the conceived design has incorporated mechanical links to amplify angular acceleration of the ball screw with ratio of 2.11. Furthermore, use of two unidirectional bearings improves efficiency by reducing power loss due to frequent reversing of the nut. Numerical simulations have been performed and the results have been validated with experimentations on a prototype. The simulation results have been used in design of the real size IBSH with electrical loading operating at its resonance frequency. Effect of important design parameters on the efficiency has been evaluated and optimum electrical and mechanical damping have been determined to achieve peak power of 16–25 W. It has been revealed that lower mechanical damping and optimum electrical damping improves power output. Significant increase in power output can be ensured by tuning the harvester stiffness according to the excitation frequency.
Similar content being viewed by others
References
Amati N, Festini A, Tonoli A (2011) Design of electromagnetic shock absorbers for automotive suspensions. Veh Syst Dyn 49(12):1913–1928
Aroudi A, Ouakad H, Benadero L, Younis M (2014) Analysis of bifurcation behavior of a piecewise linear vibrator with electromagnetic coupling for energy harvesting applications. Int J Bifur Chaos 24(5):145
Bao W (2015) Main parameters analysis of ball screw shock absorber on suspension system performance. SAE technical paper, paper no. 2015-01-1504
Beeby SP, Torah RN, Tudor MJ, Glynne-Jones P, O’Donnell T, Saha CR, Roy S (2007) A micro electromagnetic generator for vibration energy harvesting. J Micromech Microeng 17(7):1257
Cassidy IL (2012) Control of vibratory energy harvesters in the presence of nonlinearities and power-flow constraints, doctoral thesis, Duke University, Durham
Cassidy IL, Scruggs JT (2012a) A statistical linearization approach to optimal nonlinear energy harvesting. In: International society for optics and photonics SPIE smart structures and materials + nondestructive evaluation and health monitoring, p 834105-1-12
Cassidy IL, Scruggs JT, Behrens S (2011) Design of electromagnetic energy harvesters for large-scale structural vibration applications. In: International society for optics and photonics SPIE smart structures and materials and nondestructive evaluation and health monitoring, pp 79770P–79770P
Challa VR, Prasad MG, Shi Y, Fisher FT (2008) A vibration energy harvesting device with bidirectional resonance frequency tunability. Smart Mater Struct 17(1):015035
Demetgul M, Guney I (2015) Design of the hybrid regenerative shock absorber and energy harvesting from linear movement. J Clean Energy Technol 5(1):81–84
Donelan JM, Li Q, Naing V, Hoffer JA, Weber DJ, Kuo AD (2008) Biomechanical energy harvesting: generating electricity during walking with minimal user effort. Science 319(5864):807–810
Faraj R, Holnicki-Szulc J, Knap L, Seńko J (2016) Adaptive inertial shock-absorber. Smart Mater Struct 25(3):035031
Gatti G, Brennan MJ, Tehrani MG, Thompson DJ (2016) Harvesting energy from the vibration of a passing train using a single-degree-of-freedom oscillator. Mech Syst Signal Process 66:785–792
Green PL, Hendijanizadeh M, Simeone L, Elliott SJ (2015) Probabilistic modelling of a rotational energy harvester. J Intell Mater Syst Struct 2015:1–9
Guizzi GL, Manno M, Manzi G, Salvatori M, Serpella D (2014) Preliminary study on a kinetic energy recovery system for sailing yachts. Renewable Energy 62:216–225
Gupta A, Jendrzejczyk J, Mulcahy T, Hull J (2007) Design of electromagnetic shock absorbers. Int J Mech Mater Des 3(3):277–284
Harne RL (2013) Development and testing of a dynamic absorber with corrugated piezoelectric spring for vibration control and energy harvesting applications. Mech Syst Signal Process 36(2):604–617
Hendijanizadeh M, Sharkh SM, Moshrefi-Torbati M (2014) Energy harvesting from a rotational transducer under random excitation. J Renew Sustain Energy 6(4):043120
Hendijanizadeh M, Sharkh SM, Moshrefi-Torbati M (2015) Design guidelines for optimization of an inertially coupled energy harvesting generator from boat motion. J Renew Sustain Energy 7(4):043123
Hsieh C-Y, Huang B, Golnaraghi F, Moallem M (2013) A bandwidth enhanced regenerative suspension system for electric vehicles, Springer link Advanced microsystems for automotive applications, Lecture notes in mobility. Springer, Berlin, pp 257–267
Iliuk I, Balthazar JM, Tusset AM, Piqueira JR, de Pontes BR, Felix JL, Bueno ÁM (2013) Application of passive control to energy harvester efficiency using a nonideal portal frame structural support system. J Intell Mater Syst Struct 25(4):417–429
Lazar IF, Neild SA, Wagg DJ (2014a) Using an inerter-based device for structural vibration suppression. Earthq Eng Struct Dynam 43(8):1129–1147
Lazar IF, Neild SA, Wagg DJ (2014b) Design and performance analysis of inerter-based vibration control systems. Dyn Civil Struct 4:493–500
Li Q, Naing V, Hoffer JA, Weber DJ, Kuo AD, Donelan JM (2008) Biomechanical energy harvesting: apparatus and method. In: Robotics and automation, 2008. ICRA 2008. IEEE international conference, pp 3672–3677
Li Z, Lei Z, Luhrs G, Lin L, Qin Y (2013) Electromagnetic energy-harvesting shock absorbers: design, modeling, and road tests. IEEE Trans Veh Technol 62(3):1065–1074
Maravandi A, Moallem M (2015) Regenerative shock absorber using a two-leg motion conversion mechanism. Mechatron IEEE/ASME Trans 20(6):2853–2861
Satpute NV, Singh S, Sawant SM (2014) Energy harvesting shock absorber with electromagnetic and fluid damping. Adv Mech Eng 2014:1–14
Shen W, Zhu S (2015) Harvesting energy via electromagnetic damper: application to bridge stay cables. J Intell Mater Syst Struct 26(1):3–19
Singh S, Satpute NV (2015) Design and analysis of energy-harvesting shock absorber with electromagnetic and fluid damping. J Mech Sci Technol 29(4):1591–1605
Stephen NG (2006) On energy harvesting from ambient vibration. J Sound Vib 293(1):409–425
Tang X, Zuo L (2011) Enhanced vibration energy harvesting using dual-mass systems. J Sound Vib 330(21):5199–5209
Tang L, Yang Y, Soh CK (2013) Broadband vibration energy harvesting techniques. In: Springer link advances in energy harvesting methods, pp 17–61
Wang X, Liang X, Wei H (2015) A study of electromagnetic vibration energy harvesters with different interface circuits. Mech Syst Sig Process 58:376–398
Xie XD, Wang Q (2015) Energy harvesting from a vehicle suspension system. Energy 86:385–392
Xu T, Zhang L, Cheng H, Zhu Y (2011) Significantly enhanced photocatalytic performance of ZnO via graphene hybridization and the mechanism study. Appl Catal B 101(3):382–387
Yun J, Patel SN, Reynolds MS, Abowd GD (2011) Design and performance of an optimal inertial power harvester for human-powered devices. IEEE Trans Mob Comput 10(5):669–683
Zhang Y, Zhang X, Zhan M, Guo K, Zhao F, Liu Z (2015) Study on a novel hydraulic pumping regenerative suspension for vehicles. J Franklin Inst 352(2):485–499
Zhu D, Beeby SP (2013) A broadband electromagnetic energy harvester with a coupled bistable structure. J Phys IOP Publ Conf Ser 476(1):012070
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Satpute, N.V., Satpute, S.N. Design and Analysis of Ball Screw-Based Inertial Harvester. Iran J Sci Technol Trans Mech Eng 43, 359–374 (2019). https://doi.org/10.1007/s40997-017-0121-1
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s40997-017-0121-1