Abstract
In this paper, the optimum design procedure based on colliding bodies optimization method and its enhanced version are applied to optimal design of two commonly used configurations of double-layer grids, and optimum span–depth ratios are determined. Two ranges of spans as small and large sizes with certain bays of equal lengths in two directions and different types of element groupings are considered for each type of square grids. These algorithms obtain minimum weight grid through appropriate selection of tube sections available in AISC load and resistance factor design (LRFD). Strength constraints of AISC-LRFD specifications and displacement constraints are imposed on these grids. The comparison is aimed at finding the depth at which each of the different configurations shows its advantages. Finally, the effect of support locations on the weight of the double-layer grids is investigated. The results are graphically presented from which the optimum depth can easily be estimated for each type, while the influence of element grouping can also be realized at the same time.
Similar content being viewed by others
References
American Institute of Steel Construction (AISC) (1994) Manual of steel construction load resistance factor design, 2nd edn. AISC, Chicago
Camp CV (2007) Design of space trusses using Big Bang–Big Crunch optimization. J Struct Eng ASCE 133:999–1008
Camp CV, Bichon BJ, Stovall S (2005) Design of steel frames using ant colony optimization. J Struct Eng ASCE 131:369–379
Degertekin SO (2012) Improved harmony search algorithms for sizing optimization of truss structures. Comput Struct 92–93:229–241
Degertekin SO, Hayalioglu MS (2013) Sizing truss structures using teaching–learning based optimization. Comput Struct 119:177–188
Erbatur F, Hasançebi O, Tütüncü I, Kılıç H (2000) Optimal design of planar and space structures with genetic algorithms. Comput Struct 75:209–224
Gholizadeh S (2015) Optimal design of double layer grids considering nonlinear behavior by sequential grey wolf algorithm. Int J Optim Civil Eng 5:511–523
Kaveh A (2014) Advances in metaheuristic algorithms for optimal design of structures. Springer, Switzerland
Kaveh A, Bakhshpoori T (2013) Optimum design of space trusses using cuckoo search. Iran J Sci Technol Trans Civil Eng 37(C1):1–15
Kaveh A, Forhoudi N (2013) A new optimization method: dolphin echolocation. Adv Eng Softw 59:53–70
Kaveh A, Ilchi Ghazaan M (2014a) Computer codes for colliding bodies optimization and its enhanced version. Int J Optim Civil Eng 4:321–332
Kaveh A, Ilchi Ghazaan M (2014b) Enhanced colliding bodies algorithm for truss optimization with dynamic Constraints. J Comput Civil Eng. doi:10.1061/(ASCE)CP.1943-5487.0000445
Kaveh A, Khayatazad M (2012) A novel meta-heuristic method: ray optimization. Comput Struct 112–113:283–294
Kaveh A, Khayatazad M (2014) Optimal design of cantilever retaining walls using ray optimization method. Iran J Sci Technol Trans Civil Eng 38(C1+):261–274
Kaveh A, Mahdavi VR (2014) Colliding bodies optimization: a novel meta-heuristic method. Comput Struct 139:18–27
Kaveh A, Servati H (2002) Neural networks for the approximate analysis and design of double layer grids. Int J Space Struct 17:77–89
Kaveh A, Talatahari S (2009a) Particle swarm optimizer, ant colony strategy and harmony search scheme hybridized for optimization of truss structures. Comput Struct 87:267–283
Kaveh A, Talatahari S (2009b) Size optimization of space trusses using Big Bang–Big Crunch algorithm. Comput Struct 87:1129–1140
Kaveh A, Talatahari S (2010) A charged system search with a fly to boundary method for discrete optimum design of truss structures. Asian J Civil Eng 11(3):277–293
Kaveh A, Bakhshpoori T, Afshari E (2011) An optimization-based comparative study of double layer grids with two different configurations using cuckoo search algorithm. Int J Optim Civil Eng 1:507–520
Lamberti L (2008) An efficient simulated annealing algorithm for design optimization of truss structures. Comput Struct 86:1936–1953
Makowski ZS (1990) Analysis, design and construction of double-layer grids. Applied Science Publisher Ltd, London
Perez RE, Behdinan K (2007) Particle swarm approach for structural design optimization. Comput Struct 85:1579–1588
Seyedpoor SM, Salajegheh J, Salajegheh E, Gholizadeh S (2011) Optimal design of arch dams subjected to earthquake loading by a combination of simultaneous perturbation stochastic approximation and particle swarm algorithms. Appl Soft Comput 11:39–48
Talebpour MH, Kaveh A, Kalatjari VR (2014) Optimization of skeletal structures using a hybridized ACO–HS–GA algorithm. Iran J Sci Technol Trans Civil Eng 38:1–20
Yang XS, Deb S (2010) Engineering optimization by cuckoo search. Int J Math Model Numer Optim 1:330–343
Acknowledgments
The first author is grateful to Iran National Science Foundation for the support.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Kaveh, A., Moradveisi, M. Size and Geometry Optimization of Double-Layer Grids Using CBO and ECBO Algorithms. Iran J Sci Technol Trans Civ Eng 41, 101–112 (2017). https://doi.org/10.1007/s40996-016-0043-y
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s40996-016-0043-y