Skip to main content
SpringerLink
Log in

Structure Characteristics of High-Si Ductile Cast Irons

  • Technical Paper
  • Published:
International Journal of Metalcasting Aims and scope Submit manuscript

Abstract

The aim of the present study is to evaluate the actual status of silicon-alloyed ductile cast irons, as recent knowledge on the structure formation, and to review original data obtained by the authors from recent separate publications with additional unpublished data, specifically concerning the structure peculiarities. New data were added to deeply correlate the most important graphite parameters, as effects of inoculation and inoculating elements, casting section size and mold thermal properties. More than 4% Si-alloyed ductile irons are characterized by the presence of slightly irregular spheroidal graphite (Form V, ISO 945, 0.6–0.8 roundness shape factor), with the beneficial effect of inoculation. Ca, Ba-FeSi appears to be better than simple Ca-FeSi, while Ca, RE-FeSi led to higher graphite real perimeter and at lower shape factors. Inoculation also decreased the skin effect in high-Si ductile irons, including at the contribution of sulfur and oxygen from the mold coating. In the metal mold solidification of wedge casting (up to 20 mm thickness), 30% higher nodule count (> 75% at max. 15 µm size) is obtained and less depending on the casting section size, at higher values of the graphite shape factors, comparing to sand mold. Generally, higher is the graphite particles size class, lower is their compactness degree and higher is the effect of the casting wall thickness. Metal mold led to 8–10% higher graphite nodularity, for the entire wall thickness range. Higher is the minimum imposed graphite shape factor, lower is the graphite nodularity, for both metal and sand mold. As in high-Si ductile cast iron, the real graphite perimeter is strongly negatively affected; in the nodularity calculus, it is recommended to use the shape factor involving graphite real perimeter instead of its maximum size (such as stipulated in ISO 945-4-2019). Despite that higher silicon content generally suppresses the carbides formation, inoculation is still necessary to improve the quality of the graphite phase (to increase the Form VI rate) and to decrease the casting skin formation.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Subscribe and save

Springer+ Basic
$34.99 /Month
  • Get 10 units per month
  • Download Article/Chapter or eBook
  • 1 Unit = 1 Article or 1 Chapter
  • Cancel anytime
Subscribe now

Buy Now

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Figure 1
Figure 2
Figure 3
Figure 4
Figure 5
Figure 6
Figure 7
Figure 8
Figure 9
Figure 10
Figure 11
Figure 12
Figure 13
Figure 14
Figure 15
Figure 16
Figure 17
Figure 18
Figure 19

Similar content being viewed by others

References

  1. J. Lacaze, S. Dawson, A. Hazotte, Cast iron: a historical and green material worthy of continuous research. Int. J. Technol. 12(6), 1123–1138 (2021). https://doi.org/10.14716/ijtech.v12i6.5235

    Article  Google Scholar 

  2. A Modern Casting Staff Report. Census of world casting production. Modern Casting, December 2021, pp. 26–28. https://www.qgdigitalpublishing.com/publication/?i=730025&ver=html5&p=28

  3. J. Laine, A. Leppänen, K. Jalava, J. Vaara, T. Frondelius, J. Orkas, Ductile iron optimization approach for mechanically and thermally loaded components. Int. J. Metalcast. 15, 962–968 (2021). https://doi.org/10.1007/s40962-020-00529-9

    Article  CAS  Google Scholar 

  4. K. Jalava, K. Soivio, J. Laine, J. Orkas, Effect of silicon and microstructure on spheroidal graphite cast iron thermal conductivity at elevated temperatures. Int. J. Metalcast. 12, 480–486 (2018). https://doi.org/10.1007/s40962-017-0184-1

    Article  CAS  Google Scholar 

  5. F. Zanardi, C. Mapelli, S. Barella, Reclassification of spheroidal graphite ductile cast irons grades according to design needs. Int. J. Metalcast. 14, 622–655 (2020). https://doi.org/10.1007/s40962-020-00454-x

    Article  CAS  Google Scholar 

  6. S. Stan, I. Riposan, M. Chisamera, M. Barstow, Solidification pattern of Si-alloyed ductile iron. AFS. Trans. 126, 165–184 (2018)

    Google Scholar 

  7. S. Stan, I. Riposan, M. Chisamera, I. Stan, Solidification characteristics of Si-alloyed ductile cast irons. J. Mater. Eng. Perform. 28(1), 278–286 (2019). https://doi.org/10.1007/s11665-018-3828-2

    Article  CAS  Google Scholar 

  8. W. Stets, H. Löblich, G. Gassner, P. Schumacher, Solution strengthened ferritic ductile cast iron properties, production and application. Int. J. Metalcast. 8, 35–40 (2014). https://doi.org/10.1007/BF03355580

    Article  Google Scholar 

  9. https://willmanind.com/what-is-solution-strengthened-high-silicon-ferritic-ductile-cast-iron-ssfdi/

  10. W. Menk. Development of cast iron alloys for exhaust applications, European Cast Iron Meeting, 2014, Nancy, France.

  11. http://www.wkmfg.com/

  12. https://castings.plc.uk/company/materials/ductile-simo-iron/

  13. http://www.iron-foundry.com/SiMo-Ductile-Iron-Chemical-Properties-Exhaust-Manifold.html

  14. A. Alhussein, M. Risbet, A. Bastien, J.P. Chobaut, D. Balloy, J. Favergeon, Influence of silicon and addition elements on the mechanical behavior of ferritic ductile cast iron. Mater. Sci. Eng. A 605, 222–228 (2014). https://doi.org/10.1016/j.msea.2014.03.057

    Article  CAS  Google Scholar 

  15. D. Franzen, P. Weiß, B. Pustal, A. Buhrig-Polaczek, Modification of silicon microsegregation in solid-solution-strengthened ductile iron by alloying with aluminum. Int. J. Metalcast. 14, 1105–1114 (2020). https://doi.org/10.1007/s40962-020-00412-7

    Article  CAS  Google Scholar 

  16. K. Soivio, Austempering experiments of production grade silicon solution strengthened ductile iron. Mater. Sci. Forum 925, 239–245 (2018). https://doi.org/10.4028/www.scientific.net/MSF.925.239

    Article  Google Scholar 

  17. T. Kanno, Problems and improvements on the production of large casting with Hi–Si ductile iron. Int. J. Metalcast. 13, 491–499 (2019). https://doi.org/10.1007/s40962-018-0283-7

    Article  CAS  Google Scholar 

  18. T. Funabiki, K. Shimizu, H. Yasuda, K. Kusumoto. Fatigue strength of high silicon spheroidal graphite cast iron, in Proceedings of the 12nd International Symposium on the Science and Processing of Cast Iron (Muroran city in Hokkaido, Japan, Paper. No. 03, 9–12 November 2021).

  19. S. Lekakh, C. Johnson, A. Bofah, L. Godlewski, M. Li, Improving High-Temperature Performance of High Si-Alloyed Ductile Iron by Altering Additions. Inter Metalcast 15, 874–888 (2021). https://doi.org/10.1007/s40962-020-00524-0

    Article  CAS  Google Scholar 

  20. I. Stan, D. Anca, S. Stan, I. Riposan, Solidification pattern of inoculated Si-ductile irons, evaluated by thermal analysis. Metals 11(5), 846 (2021). https://doi.org/10.3390/met11050846

    Article  CAS  Google Scholar 

  21. W. Stets, H. Loblich, G. Gassner, P. Schumacher. Solution strengthened ferritic ductile cast iron according DIN EN1563:2012–properties, production and application. In Proceedings of the “Keith Millis” Symposium on Ductile Iron, Nashville, TN, USA, 15–17 October 2013; pp. 283–292.

  22. C. Dommaaschk. Chances and limits of High silicon ductile iron. In Proceedings of the WFO Technical Forum, Emperors Palace, Kempton Park, Gauteng, South Africa, 14–17 March 2017.

  23. P. Hammersberg, K. Hamberg, L.E. Bjorkegren, J. Lindkvist, H. Borgstrom, Sensitivity to Variation of Tensile Properties of High Silicon Ductile Iron. Mater. Sci. Forum. 925, 280–287 (2018). https://doi.org/10.4028/www.scientific.net/MSF.925.280

    Article  Google Scholar 

  24. M. Górny, M. Kawalec, B. Gracz, M. Tupaj, Influence of cooling rate on microstructure formation of Si–Mo ductile iron castings. Metals 11, 1634 (2021). https://doi.org/10.3390/met11101634

    Article  CAS  Google Scholar 

  25. M. Riebisch, H.G. Sönke, B. Pustal, A. Buhrig-Polaczek, Influence of Carbide-Promoting Elements on the Pearlite Content and the Tensile Properties of High Silicon SSDI Ductile Iron. Inter Metalcast 12, 106–112 (2018). https://doi.org/10.1007/s40962-017-0146-7

    Article  Google Scholar 

  26. J. Lacaze, J. Sertucha, P. Larranaga, R. Suarez. Effect of carbon, silicon, nickel and other alloying elements on the mechanical properties of as-cast ferritic ductile irons. In Proceedings of the 71st World Foundry Congress, 19-21.05.2014, Bilbao, Spain, Paper 07. Cast Iron. https://www.researchgate.net/publication/283367829_Effect_of_carbon_silicon_nickel_and_other_alloying_elements_on_the_mechanical_properties_of_as-cast_ferritic_ductile_irons

  27. G. Angella, M. Cova, G. Bertuzzi, F. Zanardi, Soundness discrimination in ferrite ductile irons through tensile data analysis. Int. J. Metalcast. 14, 816–826 (2020). https://doi.org/10.1007/s40962-020-00435-0

    Article  CAS  Google Scholar 

  28. B. Bauer, I. Mihalic Pokopec, M. Petric, P. Mrvar, Effect of Si and Ni addition on graphite morphology in heavy section spheroidal graphite iron parts. Mater. Sci. Forum. 925, 70–77 (2018). https://doi.org/10.4028/www.scientific.net/MSF.925.70

    Article  Google Scholar 

  29. B. Bauer, I. Mihalic-Pokopec, M. Petrič, P. Mrvar, Effect of cooling rate on graphite morphology and mechanical properties in high-silicon ductile iron castings. Int. J. Metalcast 14, 809–815 (2020). https://doi.org/10.1007/s40962-020-00432-3

    Article  CAS  Google Scholar 

  30. J. Sertucha, G. Artola, U. de La Torre, J. Lacaze, Chunky graphite in low and high silicon spheroidal graphite cast irons-occurrence, control and effect on mechanical properties. Materials 13, 5402 (2020). https://doi.org/10.3390/ma13235402

    Article  CAS  Google Scholar 

  31. P. Larranaga, I. Asenjo, J. Sertucha, R. Suarez, I. Ferrer, J. Lacaze, Effect of antimony and cerium on the formation of chunky graphite during solidification of heavy-section castings of near-eutectic spheroidal graphite irons. Metall. Mater. Trans. A 40, 654–661 (2009). https://doi.org/10.1007/s11661-008-9731-y

    Article  CAS  Google Scholar 

  32. B. Bauer, I. Mihalic-Pokopec, M. Petrič, P. Mrvar, Effect of bismuth on preventing chunky graphite in high-silicon ductile iron castings. Int. J. Metalcast 14, 1052–1062 (2020). https://doi.org/10.1007/s40962-020-00419-0

    Article  CAS  Google Scholar 

  33. M. Riebisch, B. Pustal, A. Bührig-Polaczek, Impact of carbide-promoting elements on the mechanical properties of solid-solution-strengthened ductile iron. Int. J. Metalcast. 14, 365–374 (2020). https://doi.org/10.1007/s40962-019-00358-5

    Article  CAS  Google Scholar 

  34. F. Stieler, D. Funk, B. Tonn. Influence of the combined addition of high levels of cerium and bismuth on the graphite morphology in SSDI. In Proceedings of the 12nd International Symposium on the Science and Processing of Cast Iron, 9–12 November 2021, Muroran city in Hokkaido, Japan, Paper. No. 12

  35. I. Riposan, T. Skaland, Modification and Inoculation of Cast Iron, in Cast Iron Science and Technology Handbook. ed. by D.M. Stefanescu (American Society of Materials, Materials Park, 2017), pp.160–176

    Google Scholar 

  36. I. Riposan, E. Stefan, S. Stan, N.R. Pana, M. Chisamera, Effects of Inoculation on Structure of High Si Ductile Cast Irons in Thin Wall Castings. Metals 10(8), 1091 (2020). https://doi.org/10.3390/met10081091

    Article  CAS  Google Scholar 

  37. J. Nellessen, M. Reibisch, B. Pustal, A. Buhrig-Polaczek. Investigating the lightweight potential of high-silicon ductile cast iron. In Proceedings of the 12nd International Symposium on the Science and Processing of Cast Iron, 9–12 November 2021, Muroran city in Hokkaido, Japan, Paper. No. 07.

  38. G. Alonso, D.M. Stefanescu, B. Bravo, G. Zarrabeitia, R. Suarez, Nodule count, end of solidification cooling rate, and shrinkage porosity correlations in high silicon SG iron. Minerals 11, 155 (2021)

    Article  CAS  Google Scholar 

  39. G. Alonso, D.M. Stefanescu, J. Sanchez, G. Zarrabeitia, R. Suarez, Effect of the type of inoculant on the shrinkage porosity of high-silicon SG iron. Int. J. Metalcast 16(1), 106–118 (2022). https://doi.org/10.1007/s40962-021-00605-8

    Article  CAS  Google Scholar 

  40. A. Fay, P. Pinel, Inoculation Solutions Against Metallurgical Problems. Int. J. Metalcast 14, 1123–1135 (2020). https://doi.org/10.1007/s40962-020-00431-4

    Article  CAS  Google Scholar 

  41. C. Hartung, R. Logan, A. Plowman, D. Wilkinson, E. Hoel, E. Ott, Research on solution strengthened ferritic ductile iron (SSFDI) structure and properties using different treatment and inoculation materials. Int. J. Metalcast. 14(4), 1195–1209 (2020). https://doi.org/10.1007/s40962-020-00469-4

    Article  CAS  Google Scholar 

  42. T. Borsato, P. Ferro, F. Berto, C. Carollo, Effect of solidification time on microstructural, mechanical and fatigue properties of solution strengthened ferritic ductile iron. Metals 9, 24 (2019). https://doi.org/10.3390/met9010024

    Article  CAS  Google Scholar 

  43. G. Alonso, D.M. Stefanescu, B. Bravo, G. Zarrabeitia, R. Suarez, Nodule count, end of solidification cooling rate, and shrinkage porosity correlations in high silicon spheroidal graphite iron. Minerals 11, 155 (2021). https://doi.org/10.3390/min11020155

    Article  CAS  Google Scholar 

  44. E. Heidari, S.M.A. Boutorabi, M.T. Honaramooz, J. Campbell, Ablation Casting of Thin-Wall Ductile Iron. Int. J. Metalcast. 16(1), 166–177 (2022). https://doi.org/10.1007/s40962-021-00579-7

    Article  Google Scholar 

  45. M. Riebisch, C. Seiler, B. Pustal, A. Buhrig-Polaczek, Microstructure of as-cast high-silicon ductile iron produced via permanent mold casting. Int. J. Metalcast. 13(1), 112–120 (2019). https://doi.org/10.1007/s40962-018-0232-5

    Article  CAS  Google Scholar 

  46. D. Anca, M. Chisamera, S. Stan, I. Riposan, Graphite degeneration in high Si, Mg-treated iron castings—S and O addition effects. Int. J. Metalcast. 14(3), 663–671 (2020). https://doi.org/10.1007/s40962-019-00385-2

    Article  CAS  Google Scholar 

  47. D. Anca, M. Chisamera, S. Stan, I. Stan, I. Riposan, Sulfur and oxygen effects on high-Si ductile iron casting skin formation. Coatings 10(7), 618 (2020). https://doi.org/10.3390/coatings10070618

    Article  CAS  Google Scholar 

  48. D.E. Anca, I. Stan, I. Riposan, S. Stan, Graphite compactness degree and nodularity of high-Si ductile iron produced via permanent mold versus sand mold casting. Materials 15(8), 2712 (2020). https://doi.org/10.3390/ma15082712

    Article  CAS  Google Scholar 

  49. ISO 945-4-2019: Microstructure of cast irons-part 4: determination of nodularity in spheroidal graphite cast irons. International Standard Organization (ISO), Geneva, Switzerland, 2019. Accessed on 08 November 2021. https://www.iso.org/standard/69360.html

Download references

Author information

Authors and Affiliations

  1. Politehnica University of Bucharest, Bucharest, Romania

    Iulian Riposan, Stelian Stan, Denisa Anca, Eduard Stefan, Iuliana Stan & Mihai Chisamera

Authors
  1. Iulian Riposan
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Stelian Stan
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Denisa Anca
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Eduard Stefan
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. Iuliana Stan
    View author publications

    You can also search for this author in PubMed Google Scholar

  6. Mihai Chisamera
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Stelian Stan.

Additional information

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

This paper is an invited submission to IJMC selected from the presentations at the 74th World Foundry Congress, held October 16–20, 2022, in Busan, Korea, and has been expanded from the original presentation.

Rights and permissions

Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Riposan, I., Stan, S., Anca, D. et al. Structure Characteristics of High-Si Ductile Cast Irons. Inter Metalcast 17, 2389–2412 (2023). https://doi.org/10.1007/s40962-022-00938-y

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s40962-022-00938-y

Keywords

Search

Navigation