Abstract
The quality of spheroidal graphite cast iron (SGI) castings is directly related to the morphology of graphite nodules. Therefore, accurate and comprehensive quantitative evaluation of microstructure is critical for industrial practices. The most influential morphological characteristics of the graphite phase in SGI can be divided into three categories: (1) shape and size of individual graphite nodules, (2) total volume of graphite phase and nodule number, and (3) spatial distribution. During the last decades, SGI structure analysis has progressed from visual observation of polished cross section and quantitative 2D techniques (metallography and automated SEM/EDX) to observation of the real 3D structure using micro-computed tomography (µCT) scanning. In this article, 2D and 3D morphological characteristics of graphite nodules were determined by µCT scanning and compared. 3D µCT provides accurate characterization of the real shape factor and diameter of graphite nodules. It was shown that large and small graphite nodules in inoculated SGI have the different modes of space distribution which could be linked to casting solidification.
Similar content being viewed by others
References
K. Mukherjeea, S. Fæstera, N. Hansena, A. Dahlb, C. Gundlachc, J. Frandsend, A. Sturlasone, Mater. Charact. 129, 169–178 (2017)
B. Imasogie, U. Wendt, J. Min. Mater. Charact. Eng. 3, 1–12 (2004)
S. Lekakh, B. Hrebec, Int. J. Metalcast. 10, 389–400 (2016)
R. Heilbronner, S. Barrett, Image Analysis in Earth Sciences (Springer, Berlin, 2014)
H. Wadell, J. Geol. 40, 443–451 (1932)
J. Rodriguez, in EJGE, vol. 18, ed. by A. Bund (2013), pp. 169–198
ISO 1083: Spheroidal graphite cast irons—Classification
ASTM E2567: Standard test method for determining nodularity and nodule count in ductile iron using image analysis
S. Lekakh, M. Harris, Int. J. Metalcast. 8, 41–49 (2014)
S. Saltykov, H. Elias, A Stereological Method for Measuring the Specific Surface Area in Metallic Powders (Springer, Berlin, 1967)
B. Mrzygłód, P. Matusiewicz, A. Tchórz, I. Olejarczyk-Wożeńska, in Archive of Foundry Engineering, vol. 13 (2013), pp. 59–63
S. Lekakh, J. Qing, V. Richards and K. Peaslee, in Trans. American Foundry Society (2013), paper 13-1321
S. Lekakh, Proceedings of 122nd Metalcating Congress (2018), paper 18-083
K. Pedersen, N. Tiedje, Mater. Charact. 59, 1111–1121 (2008)
K. Makarenko, Metal Sci. Heat Treat. 51, 235–238 (2009)
W. Spitzig, J. Kelly, O. Richmond, Metallography 18, 235–261 (1985)
S. Lekakh, Int. J. Metalcast. 11, 743–748 (2017)
Y. Yin, Z. Tu, J. Zhou, D. Zhang, M. Wang, Z. Guo, C. Liu, X. Chen, Metal. Trans. A 48A, 3794–3803 (2017)
M. Azeem, M. Bjerre, R. Atwood, N. Tiedje, P. Lee, Acta Mater. 155, 393–401 (2018)
C. Chuang, D. Singh, P. Kenesei, J. Almer, J. Hryna, R. Huff, Mater. Charact. 141, 442–449 (2018)
M. Bjerre, M. Azeem, P. Lee, J. Hattel, N. Tiedje, Mater. Sci. Forum 925, 118–124 (2018)
MatLab software. https://www.mathworks.com/products/matlab.html. Accessed 15 Jan 2019
C. Basak, A. Sengupta, Scr. Mater. 51, 255–260 (2004)
Jungho Cho, J. Mech. Sci. Technol. 29, 371–374 (2015)
Acknowledgements
Funding was provided by AFS (Grant No. 16-17#08).
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Lekakh, S.N., Zhang, X., Tucker, W. et al. Micro-CT Quantitative Evaluation of Graphite Nodules in SGI. Inter Metalcast 14, 318–327 (2020). https://doi.org/10.1007/s40962-019-00354-9
Published:
Issue Date:
DOI: https://doi.org/10.1007/s40962-019-00354-9