Table 6 Results measurements hole geometry
From: Edge strength of core drilled and waterjet cut holes in architectural glass
| Core reference series | Waterjet basic series | Difference factor (–) | |
|---|---|---|---|
| Average diameter (mm) | 11.91 | 12.09 | |
| Minimum diameter (mm) | 11.90 | 11.98 | |
| Maximum diameter (mm) | 11.93 | 12.21 | |
| Standard deviation (mm) | 0.0066 | 0.0514 | 8 |
| Average difference between 2 measurements within one hole (mm) | 0.007 | 0.047 | 7 |