Abstract
In this article, we highlight how simulation methods can be used to analyze power of economic experiments. We provide the powerBBK package programmed for experimental economists, that can be used to perform simulations in STATA. Power can be simulated using a single command line for various statistical tests (nonparametric and parametric), estimation methods (linear, binary, and censored regression models), treatment variables (binary, continuous, timeinvariant or time varying), sample sizes, experimental periods, and other design features (within or betweensubjects design). The package can be used to predict minimum sample sizes required to reach a userspecific level of power, to maximize power of a design given the researcher supplied a budget constraint, or to compute power to detect a userspecified treatment order effect in withinsubjects designs. The package can also be used to compute the probability of sign errors—the probability of rejecting the null hypothesis in the wrong direction as well as the share of rejections pointing in the wrong direction. The powerBBK package is provided as an .ado file along with a help file, both of which can be downloaded here (http://www.bbktools.org).
Similar content being viewed by others
Avoid common mistakes on your manuscript.
1 Introduction
Underpowered experimental designs can have important consequences for the representativeness of published experimental research (Fanelli and Ioannidis 2013). In particular, it may result in publication bias if papers failing to detect a significant treatment effect face a lower acceptance probability in academic journals (Button et al. 2013; Nosek et al. 2012). This in turn may discourage researchers from even submitting papers reporting insignificant treatment effects. Moreover, underpowered experimental designs can also generate significant treatment effects in the wrong direction (sign error, see Gelman and Carlin 2014). These studies suggest that significant treatment effects in underpowered studies provide little information about the true treatment effects.
Researchers planning an experimental study have to decide among other things about the number of treatment variations, the number of subjects to recruit, the number of experimental periods, and whether to conduct a within or betweensubjects design. All these decisions require a careful balancing between the chance of finding an existing effect, the precision with which this effect can be measured, and the available research budget. Statistical power computation using closedform expressions are typically derived for simple statistical models and tests and tend to be valid under very specific conditions (e.g., large sample sizes and normally distributed errors).^{Footnote 1} Simulation methods, on the other hand, have the advantage to approximate the statistical power of experimental designs under relatively general assumptions about the distribution of model unobservables and experimental design configurations.
In this paper, we illustrate how to simulate power of economic experiments and provide the powerBBK package which can be used to perform the simulations in STATA. Power can be simulated for various statistical tests (nonparametric and parametric), estimation methods (linear, binary, and censored regression models), treatment variables (binary or continuous), sample sizes, experimental periods, and other design features (within or betweensubjects designs). The powerBBK package can be used to achieve different objectives. It can be used to maximize ex ante statistical power of a given design subject to a userspecified budget constraint, taking into account the treatmentspecific costs. The package can alternatively be used to simulate the minimal necessary sample size to reach a userspecified level of statistical power. It can also be used to compute the statistical power of a particular design. In doing so, users have the option to predict the probability of detecting a userspecified treatment order effect in the context of withinsubjects designs, and the probability of sign error—the probability of rejecting the null hypothesis in the wrong direction as well as the share of rejections pointing in the wrong direction. Finally, the package can be used to conduct ex post power analyses of published results to evaluate their credibility and to get (posterior) estimates of plausible effect sizes. In all cases, powerBBK requires that users enter a single command line specifying the desired options and parameters necessary to conduct the simulations.
Other software programs and packages currently available to conduct power analyses are presented in Table 1 (#1–15) along with the current package (#16). They are offered as standalone, webbased applications, or STATA / SAS modules and are either free of charge or offered for purchase with free trials. Some of these programs (#1–5,7,10) are adapted to the needs of particular fields, such as psychology, health, epidemiology, biology and education, while others (#1,2,5,6,8,11–15) target a general audience. However, no package currently addresses the special needs of economists. Most of the programs (#1–15) rely on asymptotic approximation and none implements simulationbased methods adapted to the needs of (experimental) economists, e.g., measures power to detect treatment order effects, compares power of within and betweensubjects design with multiple periods, proposes an optimal allocation of subjects to treatment and control within a given budget, nor allows for a continuous treatment variable.^{Footnote 2}
The paper is organized as follows. Section 2 discusses the simulation of statistical power and introduces the powerBBK package. Section 3 presents an application to gift exchange experiments. Section 4 concludes.
2 Power computation using powerBBK
The powerBBK package is based on the following treatment effect regression model
where \(y_{it}^*\) denotes the latent outcome variable of subject i at period t, \(\mathbf {d}_{i}=[d_{i1},\ldots ,d_{iT},]\) is a vector of timevarying treatment variables, where \(d_{it}=1\) when subject i receives treatment at period t and 0 otherwise. The parameters of interest are \(\varvec{\beta }_1 = [\beta _{1,1},\ldots ,\beta _{1,T}]'\). This specification nests as a special case a timeinvariant treatment effect model (where all \(\beta _{1,t}\) are identical). Treatment variables \(\mathbf {d}_{i}\) are allowed to be either dichotomous or continuous. Timeinvariant unobserved heterogeneity is captured by \(\mu _i\) with corresponding cumulative distribution function \(F_\mu\). The remaining errors \(\epsilon _{it}\) are drawn from a cumulative distribution \(F_{\epsilon \mathbf {d}}(a)\). We allow the errors to be heteroscedastic: the variance of the errors \(\epsilon _{it}\) can depend on treatment conditions \(\mathbf {d}_{i}\). We denote by \(\sigma ^2_{\epsilon ,\mathbf {d}}\) the variance of \(\epsilon _{it}\) conditional on treatment. A betweensubjects (hereafter BS) design implies that \(\{d_{it}:t=1,\ldots ,T\}\) does not vary across t. For the case of binary BS treatment, a subject is either assigned only to the control condition (\(d_{it}=0\) for all t) or to the treatment condition (\(d_{it}=1\) for all t). The continuous BS treatment assigns subjects randomly to a treatment drawn from the researcher specified set of treatment variables. In the presence of homoscedastic errors \(\epsilon _{it}\), the noise level \(\mu _i + \epsilon _{it}\) is the same for treatment and control conditions. In this case it is reasonable to implement a BS design by assigning an equal number of subjects to control and treatment conditions. In the presence of heteroscedastic errors \(\epsilon _{it}\), statistical power can possibly be improved by assigning more subjects to the conditions where the noise level is higher. A withinsubjects (hereafter WS) design implies that \(\{d_{it}:t=1,\ldots ,T\}\) varies across t for each subject. In the presence of homoscedastic errors \(\epsilon _{it}\), it is reasonable to use a balanced WS design with \(d_{it}=0\) for T / 2 periods as long as the expected cost of a subject is approximately the same under both treatment conditions. In the presence of heteroscedastic errors \(\epsilon _{it}\), statistical power may be improved by assigning subjects to the noisier conditions for a higher number of periods. Finally, we maintain the assumption that \(\mu _i\) is independent of all \(d_{it}\). This assumption is typically motivated by the randomization of subjects to treatment conditions.
The powerBBK package considers three leading datagenerating processes.

Case 1. Linear model: \(y_{it} = y_{it}^*.\)

Case 2. Binary choice model: \(y_{it} = 1 \text { if } y_{it}^* \ge 0\), and 0 otherwise.

Case 3. Model with censoring from below at a: \(y_{it} = \max (a,y_{it}^*),\)
where the observable outcome variable \(y_{it}\) may differ from \(y_{it}^*\) according to the case considered. With this parameterization we can generate samples for different sequences \(\{d_{it}:t=1,\ldots ,T\}\) given values of \((\beta _0,\varvec{\beta }_1)\) and \((F_\mu , F_{\epsilon \mathbf {d}})\). Identification of \((\beta _0,\varvec{\beta }_1)\) requires some minimal restrictions on the functions \((F_\mu , F_{\epsilon \mathbf {d}})\). Mean independence with the treatment indicator is sufficient for the linear model (Case 1). Independence between \(\epsilon _{it}\) is typically assumed for Cases 2 and 3. Note that Cases 1 and 3 allow the variance of \(\epsilon _{it}\) to differ between control and treatment conditions. The user can specify any distribution available in STATA for \(F_{\epsilon \mathbf {d}}\) for Case 1. The package implements Case 2 as either a probit or logit model, thus setting \(F_\epsilon\) to the standard normal or logistic distribution, respectively. The package implements Case 3 by setting \(F_{\epsilon \mathbf {d}}\) to a mean zero normal distribution with variance \(\sigma ^2_{\epsilon ,\mathbf {d}}\), the familiar tobit model. The distribution \(F_\mu\) is always assumed to be the normal distribution with a userspecified standard deviation, as most panel data models rely on this assumption in the estimation procedure.
The datagenerating process described above is relatively flexible in terms of the type of outcome distributions it can capture. This is especially true for Case 1. The package currently does not support other discrete outcomes, notably multinomial choices or ordered responses. The powerBBK is free and opensource, allowing users to extend the package to suit their needs.
The powerBBK package requires the user to specify details concerning the experimental design, such as the number of subjects, number of periods, WS or BS design, balance of WS design and so on. There are options to evaluate the statistical power over a range of values N and to assess simultaneously power of both WS and BS designs. The user can specify whether or not to include individual heterogeneity by means of randomeffects terms (i.e., the variance of \(\mu _i\) is greater than 0) or to include treatmentspecific heteroscedasticity (i.e., the variance of \(\epsilon _{it}\) depends on the treatment received). Users can also specify when appropriate (e.g., in linear models) the distribution of errors \((F_\mu , F_{\epsilon \mathbf {d}})\) they require for their simulations, thus allowing for example heavytailed distributions in linear models. The package further permits users to simulate power of nonparametric rankbased tests and can accommodate several common nonlinear models (i.e., logit, probit, tobit).^{Footnote 3} Users can use the package to predict the maximal power a design can reach given a userspecified budget constraint with treatmentspecific costs. Additional information and examples are available in the help file provided with the package.
Computing power of a given design is straightforward using the following steps.
Step 1 Fix N and T and for a given design (WS or BS), values of \((\beta _0,\varvec{\beta }_1)\) and choice of \((F_\mu , F_{\epsilon \mathbf {d}})\) generate a sample \(\{\{(y_{it},d_{it}):t=1,\ldots ,T\}:i=1,\ldots ,N\}\).
Step 2—parametric Estimate \((\beta _0,\varvec{\beta }_1)\) and the parameters of \((F_\mu , F_{\epsilon \mathbf {d}})\) and compute \(\hat{z}_t = \hat{\beta }_{1,t}/se(\hat{\beta }_{1,t})\) and the corresponding p value of the null hypothesis \(H_0:\beta _{1,t}=0\) against either a onesided or twosided alternative. Here \(se(\hat{\beta }_{1,t})\) denotes the standard error of the estimated period t treatment effect.^{Footnote 4}
Step 2—nonparametric Aggregate the individual data over T and use nonparametric rankbased tests (e.g., Wilcoxon ranksum test for BS data, Wilcoxon signedrank test for WS data) of the null hypothesis that the distribution of the aggregated values of y are the same under control and treatment conditions and compute the p value of the test.
Step 3 Repeat steps 1 and 2 for a large number of samples. Compute the fraction of p values which are less than the significance level of the test (e.g., 5 %). This represents the power of the test.
Repeating the three steps above for a range of N and T values for each design, enables the researcher to plot power curves for each element of \(\varvec{\beta }_1\). Power curves are useful for comparing the designs for a given sample size, for determining the minimal sample size needed to reach a certain statistical power separately for each design, or to look at the effect of the number of periods and how to balance the number of participants in the treatments. The package also offers users the possibility of predicting the maximal power an experimental design can reach given a specified budget constraint. In this case, users are required to additionally specify the expected payoff of a participant in each treatment as well as the total available budget. The package then evaluates the power of a series of userspecified allocations, which easily allows users to determine the allocation that maximizes power. Finally, an issue concerning WS designs is possible treatment order effects. These effects imply that the response depends on whether treatment or control conditions are experienced first. The powerBBK package can be used to predict the probability of detecting a userspecified treatment order effect for a given experimental design. This option is currently only implemented for the timeinvariant binary treatment effect model where all elements of \(\varvec{\beta }_1\) are identical.
3 Illustration: gift exchange in the field
We illustrate the power analysis presented in Sect. 2 with an application in the context of field experiments designed to measure reciprocal preferences of workers. The Appendix provides one of the command lines used to perform this analysis. Our analysis exploits data from two different studies in this area. Gneezy and List (2006) use a BS design in the context of a single day spot labor market experiment with a data entry task. They assign 9 workers to their treatment condition (gift) and 10 workers to the control condition (no gift). They estimate a linear randomeffects panel data model (Case 1 in Sect. 2) with individualspecific effects \(\mu _i\) and where t indexes the hour of work within the experimental day. Bellemare and Shearer (2009) use a WS design with 18 workers (treeplanters). They test how workers respond to a gift from their employer. Their WS design is unbalanced: workers planted first for 5 days under control conditions (no gift). Workers then received a gift on the final day of planting on the experimental block. Bellemare and Shearer (2009) estimate a linear fixedeffects panel data model (Case 1) with individualspecific effects \(\mu _i\) and where t indexes the day of work during the experiment. Both studies use roughly the same total number of subjects and time periods, but the notion of time varies across studies.
We first estimated a randomeffects panel data model of Eq. (1) using the Gneezy and List data with the dependent variable being the natural log of productivity. We get \((\widehat{\beta }_0,\widehat{\beta }_1)= (3.674, 0.055)\), \(\widehat{\sigma }^2_\mu = 0.088\), \(\widehat{\sigma }^2_{\epsilon } = 0.018\). The corresponding estimates using the Bellemare and Shearer data are \((\widehat{\beta }_0,\widehat{\beta }_1)= (6.955, 0.061)\), \(\widehat{\sigma }^2_\mu = 0.046\), \(\widehat{\sigma }^2_{\epsilon } = 0.018\). The estimated treatment effect (\(\beta _1\)) and estimated error variance \(\sigma ^2_{\epsilon }\) are very similar for both studies. The estimated value of \(\sigma ^2_{\mu }\) (unobserved heterogeneity) on the other hand is twice as high in the Gneezy and List data.^{Footnote 5}
We next used the estimated model parameters from both data sets to simulate power of WS and BS designs for two scenarios, the lownoise and the highnoise scenario. The lownoise scenario sets \((\sigma ^2_{\mu }=0.045\) and \(\sigma ^2_{\epsilon }=0.02\) while the highnoise scenario sets \(\sigma ^2_{\mu }=0.09\) and \(\sigma ^2_{\epsilon }=0.02\). The variance of \(\mu _i\) in the highnoise scenario is thus exactly twice the corresponding value for the lownoise scenario. We will consider three values for \(\beta _1\) (0.05, 0.1 and 0.15) for both scenarios. The value of \(\beta _0\) plays no role in our analysis and will be set to 7.0 in all our simulations. We will also consider setting T to 2 and 6. Setting \(T=6\) proxies the number of periods used in both studies. The case \(T=2\) is interesting because it proxies experiments which take place with very low number of observations, e.g., for two periods, while still allowing a meaningful comparison of WS and BS designs. It also represents a case where researchers have little information to control for the presence of unobserved individual heterogeneity \(\mu _i\). It is straightforward to consider other values of T. We perform a separate power analysis for each scenario for a doublesided test with a 5 % level of significance. We implement the BS design by assigning the same number of subjects to control and treatment conditions. We implement a balanced WS design by assigning subjects to the same number of periods under control and treatment conditions. We also simulated power for an “unbalanced” WS design assigning subjects to the treatment condition for only one out of six periods. Simulated power of the unbalanced WS design was not very different to the power of the balanced WS design. This is to be expected as the variance of the outcome variable is kept constant under control and trial conditions. We thus focus our analysis on the balanced WS design. Finally, we use the OLS estimator with standard errors clustered at the individual level. All our results are very similar when using the (asymptotically more efficient) GLS estimator.
Figure 1 presents the simulated power curves for the lownoise scenario. Several regularities emerge. First, we find that power is systematically higher for the WS design for all 6 combinations of \(\beta _1\) and T values used. This result is expected given the WS design exploits within subject variation in decisions for a given individual (for a given level of \(\mu _i\)). This advantage of the WS design over the BS design is well documented [see, e.g., Keren (1993)]. We also find that increasing the number of periods raises power of the WS design, but has relatively minor impact on power of the BS design. The quantitative differences in power between both designs are perhaps more surprising. A natural way to compare both designs is to compare the minimal number of subjects (MNS) required to reach a given level of power. Social scientists often argue that an experiment should aim to correctly detect a treatment effect 80 % of the time (see Cohen 1988) when using a doublesided test along with a 5 % significance level. Table 2 presents the simulated MNS required to reach this power threshold derived from the curves in Fig. 1. We find that the MNS exceeds 400 subjects for the BS design for both values of T when \(\beta _1=0.05\). In comparison, the MNS of the WS design is 122 subjects when \(T=2\), and 42 subjects when \(T=6\). As expected, the required MNS decrease with \(\beta _1\). The MNS of the BS design when \(\beta _1=0.1\) are 182 subjects and 162 subjects for 2 and 6 periods, respectively. The corresponding MNS of the WS design are 30 subjects and less than 20 subjects, thus 6–8 times less than the corresponding MNS of the BS design. Finally, MNS of the BS when \(\beta _1=0.15\) are 84 subjects and 74 subjects for 2 and 6 periods, respectively. Corresponding MNS of the WS design are both below 20 subjects, roughly 4 times less than the BS design.
Figure 2 presents the simulated power curves for the highnoise scenario. Several interesting regularities emerge. First, power curves of the WS design in the highnoise scenario are very similar to those of the WS design in the lownoise scenario. Power of the BS design, on the other hand, is substantially worse under the highnoise scenario than under the lownoise scenario. These regularities are captured by the corresponding MNS of both designs (see Table 2). We find that the MNS of the WS in the highnoise scenario are very similar to the corresponding values in the lownoise scenario. The MNS of the BS design, on the other hand, are considerably higher. In particular, we find that the BS design requires between 286 and 302 subjects to detect a value of \(\beta _1=0.1\) with power of 80 %. This is roughly 120 subjects more (approx. 65 % more) than required in the lownoise scenario. Similarly, we find that MNS of the BS design lies between 130 and 140 subjects when \(\beta _1=0.15\). This is roughly 60 subjects more (approx. 70 % more) than required in the lownoise scenario. These results suggest that researchers planning to conduct BS design experiments in this area should carefully consider the level of noise they expect to be present in the data.^{Footnote 6}
In most power analyses, model parameters values are calibrated using data from either existing studies or pilot experiments conducted by the researchers themselves. These values represent estimates of the true but unobserved underlying population parameters and are thus subject to sampling variability. The importance of sampling variability is especially relevant when values are calibrated using small data sets. In these cases, researchers may consider repeating their power analysis for a selected range of values for each model parameter. One straightforward approach would be to draw parameter values from the sampling distribution of the model parameters and evaluate power for each draw, thus approximating the sampling distribution of the predicted power.
4 Conclusion
This paper highlighted the usefulness of simulation methods for power analysis of economic experiments and provides the powerBBK package to perform such analyses, taking into account several common design features and the possibility to optimize experimental designs under budget constraints.
Notes
See List et al. (2011) for results and discussion.
In those cases, the distributions \((F_\mu , F_{\epsilon \mathbf {d}})\) are prespecified.
Note, that the estimators used in Step 2 will depend on the nature of the outcome variable. The maximum likelihood estimator can be used in all three cases (linear, binary choice or models with censoring). Linear regression with clustered standard errors can also be used in the case of the linear model. This is a popular choice for experimental economists, as the distributions \((F_\mu , F_{\epsilon \mathbf {d}})\) are often unknown in practice.
Both studies estimate regression models using the variable \(y_{it}\) in level—they do not use the natural logarithm of productivity as the dependent variable. Using the natural logarithm of productivity simplifies the comparison of the estimated treatment effect of both studies. Bellemare and Shearer (2009) additionally control for weather effects while (Gneezy and List 2006) allow the effect of the gift to vary across time. Estimated model parameters with those additional controls are very similar to the results we report here.
We repeated the power analysis using nonparametric rankbased tests (Wilcoxon ranksum tests and Wilcoxon signedrank tests). Results are very similar and available upon request.
References
Bellemare, C., & Shearer, B. (2009). Gift giving and worker productivity: evidence from a firmlevel experiment. Games and Economic Behavior, 67(1), 233–244.
Button, K. S., Ioannidis, J. P. A., Mokrysz, C., Nosek, B. A., Flint, J., Robinson, E. S. J., et al. (2013). Power failure: why small sample size undermines the reliability of neuroscience. Nature Reviews Neuroscience, 14(5), 365–376.
Cohen, J. (1988). Statistical power analysis for behavioral sciences (2nd ed.). New Jersey: Routledge Academic.
Dattalo, P. (2009). A review of software for sample size determination. Evaluation & The Health Professions, 32(3), 229–248.
Fanelli, D., & Ioannidis, J. P. A. (2013). US studies may overestimate effect sizes in softer research. Proceedings of the National Academy of Sciences, 110(37), 15031–15036.
Gelman, A., & Carlin, J. (2014). Beyond power calculations: assessing type S (sign) and type M (magnitude) errors. Perspectives on Psychological Science, 9, 641–651.
Gneezy, U., & List, J. A. (2006). Putting behavioral economics to work: testing for gift exchange in labor markets using field experiments. Econometrica, 74(5), 1365–1384.
Keren, G. (1993). Between or withinsubjects design: a methodological dilemma. In G. Keren, C. Lewis (Eds.), A Handbook for data analysis in the behavioral sciences, Chapter 8. New Jersey: Lawrence Erlbaum Associates Inc.
List, J., Sadoff, S., & Wagner, M. (2011). So you want to run an experiment, now what? Some simple rules of thumb for optimal experimental design. Experimental Economics, 14(4), 439–457.
Nosek, B. A., Spies, J. R., & Motyl, M. (2012). Scientific Utopia: II. Restructuring incentives and practices to promote truth over publishability. Perspectives on Psychological Science, 7(6), 615–631.
Peng, C. Y. J., Long, H., & Abaci, S. (2012). Power analysis software for educational researchers. The Journal of Experimental Education, 80(2), 113–136.
Thomas, L., & Krebs, C. J. (1997). A review of statistical power analysis software. Bulletin of the Ecological Society of America, 78(2), 126–139.
Author information
Authors and Affiliations
Corresponding author
Additional information
Part of the paper was written at the Institute of Finance at the School of Business and Economics at Humboldt Universität zu Berlin and at the Department of Economics at Zurich University. We thank both institutions for their hospitality. We thank Nicolas Couët for his valuable research assistance. We are grateful to participants at the ASFEE conference in Montpellier (2012), ESA meeting in New York (2012), the IMEBE in Madrid (2013), and seminar participants at the Department of Economics at Zurich University (2013) and at Technische Universität Berlin (2013). Finally, we thank reviewers and coeditors for extremely helpful comments and suggestions.
Appendix
Appendix
Consider the following STATA command used to generate the top left panel of Fig. 1.
The mandatory argument pwrexample is a prefix for the names of variables (to be generated) containing the results of the simulations and can be directly used to reproduce the panel in Fig. 1. We simulate the statistical power for a twoperiod experiment (set using t(2)) and participants ranging from 20 to 400. This simulation assumes that each period under either treatment or control condition costs 1 unit of currency per participant. We need to consider budgets ranging from 40 to 800 units (the first and last numbers inside the budget command). Samples sizes are incremented by steps of two participants, or 4 budgetary units indicated using (4) in the budget command (the cost of two additional participants over two periods). It is possible to run the simulation for a single budget value, say 800 units, by specifying budget(800). Per period treatment or control conditionspecific costs of (say) 2 units can be specified by adding costtreatment(2) and/or costcontrol(2). By default, the package allocates an equal share of participants to control and treatment conditions. Users can alternatively evaluate power for different allocations. Adding the option allocation(0.33 0.5 0.66) will for example produce separate power calculations when 1/3, half, and 2/3 of participants are, respectively, allocated to control conditions.
Simulations are performed using both WS and BS designs by setting design(both). Setting instead design(within) or design(between) implements only the WS or BS design. The constant and slope parameters are set using beta(6.3 0.05), which implies \(\beta _0 = 6.3\) and \(\beta _1 = 0.05\) through the simulations outlined in Sect. 2. The option muvar(0.045) sets \(\sigma ^2_{\mu }=0.045\) while epsvar(0.02) sets \(\sigma ^2_{\epsilon }=0.02\). These variance parameter values were previously estimated using the Bellemare and Shearer (2009) data (see Sect. 3). GLS linear panel regression is used by setting command(regress) panel. Alternatively, nonparametric tests can be used by setting command(rank) panel. Tobit and Probit (panel) regressions can be specified using command(tobit) or command(probit), where epsvar(1) (\(\sigma ^2_{\epsilon }=1\)) is the default normalization for Probit and need not be set by users. Note that command(tobit) sets as default censoring from below at 0. These values can be adjusted by users. Detailed information about other features and options of the package can be found in the help file provided with the package.
Rights and permissions
About this article
Cite this article
Bellemare, C., Bissonnette, L. & Kröger, S. Simulating power of economic experiments: the powerBBK package. J Econ Sci Assoc 2, 157–168 (2016). https://doi.org/10.1007/s4088101600284
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s4088101600284