Abstract
The classical transfer path analysis (TPA) method has become a standard measurement method. It has high accuracy but remains a time-consuming and complex measurement, which limits its application in industry. The operational transfer path analysis (OTPA) method is known for its high efficiency; however, the accuracy of this method for industrial application is controversial. To separate the intake and exhaust noises in the vehicle, this study presents a novel TPA method called simulated operational path analysis (SOPA). The transmissibility from the reference point to the target response point is estimated by using an external noise source to simulate the intake and exhaust noises under operating condition. In addition, the improved dual-microphone noise reduction technology is used to eliminate the background noise in the reference response. The method is validated by an experimental bench. The result shows that its high accuracy can be compared with the classical TPA method. Because there is no need to use a special miniature volume source to estimate the passive subsystem frequency response functions and identify the operational source loads, the efficiency of the SOPA method is higher than the classic TPA method and is close to the OTPA method.
Similar content being viewed by others
References
Haire, J.B., Carney, M.J., Cheenne, D.J.: A study of automobile exhaust noise preferences. J. Acoust. Soc. Am. 117(4), 2449 (2005)
Yang, L., Chu, Z., Zhao, D., He, Y., Chen, X.: Analysis and control for the intake noise of a vehicle. Acoust. Aust. 46, 259–267 (2018)
Seijs, M.V.V.D., Klerk, D.D., Rixen, D.J.: General framework for transfer path analysis: history, theory and classification of techniques. Mech. Syst. Signal Process. 68–69, 217–244 (2015)
van der linden, P.J.G., De Meester, K.: Airborne source strength measurements on the basis of pressure indicator inversion applied to an engine valve cover. In: 6th ICSV, St-Petersburg (1996)
Noumura, K., Yoshida, J.: A method of transfer path analysis for vehicle interior sound with no excitation experiment. In: Proceedings of FISITA 2006 World Automotive Congress, F2006D183, JSAE (2006)
Putner, J., Lohrmann, M., Fastl, H.: Contribution analysis of vehicle exterior noise with operational transfer path analysis. J. Acoust. Soc. Am. 133(5), 3323 (2013)
Bendat, J.S.: Solutions for the multiple input/output problem. J. Sound Vib. 44(3), 311–325 (1976)
Leung, R.C.: Multiple path signature decomposition—a noise path diagnostic technique. In: 6th ICSV, Copenhagen, Denmark (1999)
Henry, E.R., Hofrichter, J.: Singular value decomposition: application to analysis of experimental data. Methods Enzymol. 210C, 129–192 (1992)
Biermayer, W., Brandl, F., Höldrich, R., et al.: Efficient transfer path analysis for vehicle sound engineering. In: JSAE Annual Congress, Pacifico Yokohama (2008)
Roozen, N.B., Leclère, Q.: On the use of artificial excitation in operational transfer path analysis. Appl. Acoust. 74, 1167–1174 (2013)
Zhu, P., Zhang, Z., Qin, Z., Shen, Yang: The transfer path analysis method on the use of artificial excitation: numerical and experimental studies. Appl. Acoust. 136, 102–112 (2018)
Janssens, K., Mas, P., Gielen, L., et al.: A Novel Transfer Path Analysis Method Delivering a Fast and Accurate Noise Contribution Assessment. SAE Technical Paper Series. 2009-26-0047 (2009)
De Sitter, G., Devriendt, C., Guillaume, P., Pruyt, E.: Operational transfer path analysis. Mech. Syst. Signal Process. 24(2), 416–431 (2010)
Gajdatsy, P., Janssens, K., Desmet, W., Van der Auweraer, H.: Application of the transmissibility concept in transfer path analysis. Mech. Syst. Signal Process. 24(7), 1963–1976 (2010)
van der Seijsa, M.V., de Klerk, D., Rixenc, D.J.: General framework for transfer path analysis: history, theory and classification of techniques. Mech. Syst. Signal Process. 68–69, 217–244 (2016)
DeKlerk, D., Ossipov, A.: Operational transfer path analysis: theory, guidelines & tire noise application. Mech. Syst. Signal Process. 24(7), 1950–1962 (2010)
Ih, J.-G., Kim, H.-J., Lee, S.-H., et al.: Prediction of intake noise of an automotive engine in run-up condition. Appl. Acoust. 70(2), 347–355 (2009)
Fu, Z.H., Fan, F., Huang, J.D.: Dual-microphone noise reduction for mobile phone application. In: Acoustics, Speech and Signal Processing (ICASSP), 2013 IEEE International Conference on. IEEE (2013)
Jeub, M., Herglotz, C., Nelke, C., et al.: Noise reduction for dual-microphone mobile phones exploiting power level differences. In: IEEE International Conference on Acoustics. IEEE (2012)
Sottek, R., Philippen, B.: Tire-road noise analysis of on-road measurements under dynamic driving conditions. SAE Int. J. Passeng. Cars Mech. Syst. 5(3), 1116–1123 (2012)
Acknowledgements
This study was supported by National Key Research and Development Program—Research on Application of Vibration, Noise and Post-processing of Medium Power Agricultural Diesel Engine (Grant No. 2016YFD0700704B) and National Natural Science Foundation of China (Grant No. 51575410).
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Zhu, Y., Lu, C., Liu, Z. et al. Simulated Operational Path Analysis Method for the Separation of Intake and Exhaust Noises. Acoust Aust 48, 261–270 (2020). https://doi.org/10.1007/s40857-020-00191-5
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s40857-020-00191-5