Advertisement

Science China Materials

, Volume 58, Issue 12, pp 953–960 | Cite as

Perovskite-polymer hybrid solar cells with near-infrared external quantum efficiency over 40%

  • Long Ye
  • Benhu Fan
  • Shaoqing Zhang
  • Sunsun Li
  • Bei Yang
  • Yunpeng Qin
  • Hao Zhang
  • Jianhui Hou
Articles

Abstract

In the past several years, conjugated polymers and organometal halide perovskites have become regarded as promising light-absorbing materials for next-generation photovoltaic devices and have attracted a great deal of interest. As the main part of this contribution, we describe the enhancement of near-infrared (NIR) photoresponse of well-known CH3NH3PbI3−x Cl x -based solar cells by the integration of bulk heterojunction (BHJ) small band gap polymer:fullerene absorbers. Particularly, the integration of a commercially available polymer PDPP3T and PCBM-based BHJ boosts the peak external quantum efficiency (EQE) by up to 46% in the NIR region (800−1000 nm), which is outside of the photoresponsive region (300−800 nm) of conventional perovskite solar cells. This substantial improvement in the EQE over the NIR region offers an additional current density of ∼5 mA cm−2 for the control perovskite solar cell, and a high power conversion efficiency (PCE) of over 12% was obtained in the perovskite/BHJ-based solar cells. In addition, the insertion of the BHJ absorber consisting of a small band gap polymer PDTP-DFBT and PCBM also results in nearly 40% EQE for the perovskite/BHJ solar cell. The results also reveal that controlling over the polymer/PCBM weight ratio for a BHJ absorber is the key to achieving the optimal efficiency for this type of perovskite-polymer hybrid solar cell.

Keywords

Solar Cell Perovskite External Quantum Efficiency Polymer Solar Cell Hybrid Solar Cell 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

中文摘要

近年来, 共轭聚合物和钙钛矿型有机金属卤化物被视为极具潜力的光伏材料, 引起了广泛的研究兴趣. 本文通过引入两种本体异质结(BHJ)聚合物: 富勒烯活性层, 大幅提高了基于CH3NH3PbI3−x 的钙钛矿太阳能电池的近红外光响应特性. 其中, 基于窄带隙聚合物PDPP3T的钙钛矿/BHJ杂化太阳能电池在近红外区域(800∼1000 nm)内的外量子效率(EQE)峰值高达46%, 且该区域已经超出了CH3NH3PbI3−x 型太阳能电池的光响应范围(300∼800 nm). 相较于参照的钙钛矿太阳能电池, 近红外区域大幅提升的EQE为钙钛矿/BHJ杂化太阳能电池贡献了额外的电流密度(∼5 mA cm−2), 因此其光电转换效率达到了12%以上. 此外, 引入基于聚合物PDTP-DFBT的BHJ也可以使钙钛矿太阳能电池在近红外区域的EQE达到40%以上. 研究结果也表明优化BHJ的聚合物: 富勒烯比例是提高这类钙钛矿-聚合物杂化太阳能电池性能的关键.

Supplementary material

40843_2015_102_MOESM1_ESM.pdf (500 kb)
Supplementary material, approximately 501 KB.

References

  1. 1.
    Gao F, Ren S, Wang J. The renaissance of hybrid solar cells: progresses, challenges, and perspectives. Energy Environ Sci, 2013, 6: 2020–2040CrossRefGoogle Scholar
  2. 2.
    Chueh CC, Li CZ, Jen AKY. Recent progress and perspective in solution-processed interfacial materials for efficient and stable polymer and organometal perovskite solar cells. Energy Environ Sci, 2015, 8: 1160–1189CrossRefGoogle Scholar
  3. 3.
    Green MA, Ho-Baillie A, Snaith HJ. The emergence of perovskite solar cells. Nat Photonics, 2014, 8: 506–514CrossRefGoogle Scholar
  4. 4.
    Song TB, Chen Q, Zhou H, et al. Perovskite solar cells: film formation and properties. J Mater Chem A, 2015, 3: 9032–9050CrossRefGoogle Scholar
  5. 5.
    Xiao J, Shi J, Li D, Meng Q. Perovskite thin-film solar cell: excitation in photovoltaic science. Sci China Chem, 2015, 58: 221–238CrossRefGoogle Scholar
  6. 6.
    You J, Hong Z, Yang Y, et al. Low-temperature solution-processed perovskite solar cells with hi gh efficiency and flexibility. ACS Nano, 2014, 8: 1674–1680CrossRefGoogle Scholar
  7. 7.
    Xie FX, Zhang D, Su H, et al. Vacuum-assisted thermal annealing of CH3NH3PbI3 for highly stable and efficient perovskite solar cells. ACS Nano, 2015, 9: 639–646CrossRefGoogle Scholar
  8. 8.
    Liang PW, Liao CY, Chueh CC, et al. Additive enhanced crystallization of solution-processed perovskite for highly efficient planar-heterojunction solar cells. Adv Mater, 2014, 26: 3748–3754CrossRefGoogle Scholar
  9. 9.
    You J, Yang Y, Hong Z, et al. Moisture assisted perovskite film growth for high performance solar cells. Appl Phys Lett, 2014, 105: 183902CrossRefGoogle Scholar
  10. 10.
    Min J, Zhang ZG, Hou Y, et al. Interface engineering of perovskite hybrid solar cells with solution-processed perylene–diimide heterojunctions toward high performance. Chem Mater, 2015, 27: 227–234CrossRefGoogle Scholar
  11. 11.
    Xue Q, Hu Z, Liu J, et al. Highly efficient fullerene/perovskite planar heterojunction solar cells via cathode modification with an amino-functionalized polymer interlayer. J Mater Chem A, 2014, 2: 19598–19603CrossRefGoogle Scholar
  12. 12.
    Sun C, Xue Q, Hu Z, et al. Phosphonium halides as both processing additives and interfacial modifiers for high performance planar-heterojunction perovskite solar cells. Small, 2015, 11: 3344–3350CrossRefGoogle Scholar
  13. 13.
    Docampo P, Ball JM, Darwich M, Eperon GE, Snaith HJ. Efficient organometal trihalide perovskite planar-heterojunction solar cells on flexible polymer substrates. Nat Commun, 2013, 4: 2761CrossRefGoogle Scholar
  14. 14.
    Sun K, Chang J, Isikgor FH, Li P, Ouyang J. Efficiency enhancement of planar perovskite solar cells by adding zwitterion/LiF double interlayers for electron collection. Nanoscale, 2015, 7: 896–900CrossRefGoogle Scholar
  15. 15.
    Xia Y, Sun K, Chang J, Ouyang J. Effects of organic inorganic hybrid perovskite materials on the electronic properties and morphology of poly (3,4-ethylenedioxythiophene): poly (styrenesulfonate) and the photovoltaic performance of planar perovskite solar cells. J Mater Chem A, 2015, 3: 15897–15904CrossRefGoogle Scholar
  16. 16.
    Li C, Wang F, Xu J, et al. Efficient perovskite/fullerene planar heterojunction solar cells with enhanced charge extraction and suppressed charge recombination. Nanoscale, 2015, 7: 9771–9778CrossRefGoogle Scholar
  17. 17.
    Wang L, Fu W, Gu Z, et al. Low temperature solution processed planar heterojunction perovskite solar cells with a CdSe nanocrystal as an electron transport/extraction layer. J Mater Chem C, 2014, 2: 9087–9090CrossRefGoogle Scholar
  18. 18.
    Liu X, Yu H, Yan L, et al. Triple cathode buffer layers composed of PCBM, C60, and LiF for high-performance planar perovskite solar cells. ACS Appl Mater Interfaces, 2015, 7: 6230–6237CrossRefGoogle Scholar
  19. 19.
    Liu X, Jiao W, Lei M, et al. Crown-ether functionalized fullerene as a solution-processable cathode buffer layer for high performance perovskite and polymer solar cells. J Mater Chem A, 2015, 3: 9278–9284CrossRefGoogle Scholar
  20. 20.
    Dou L, You J, Hong Z, et al. 25th anniversary article: a decade of organic/polymeric photovoltaic research. Adv Mater, 2013, 25: 6642–6671CrossRefGoogle Scholar
  21. 21.
    Li Y. Molecular design of photovoltaic materials for polymer solar cells: toward suitable electronic energy levels and broad absorption. Acc Chem Res, 2012, 45: 723–733CrossRefGoogle Scholar
  22. 22.
    Ye L, Zhang S, Huo L, Zhang M, Hou J. Molecular design toward highly efficient photovoltaic polymers based on two-dimensional conjugated benzodithiophene. Acc Chem Res, 2014, 47: 1595–1603CrossRefGoogle Scholar
  23. 23.
    Wang F, Tan Za, Li Y. Solution-processable metal oxides/chelates as electrode buffer layers for efficient and stable polymer solar cells. Energy Environ Sci, 2015, 8: 1059–1091CrossRefGoogle Scholar
  24. 24.
    You J, Dou L, Yoshimura K, et al. A polymer tandem solar cell with 10.6% power conversion efficiency. Nat Commun, 2013, 4: 1446CrossRefGoogle Scholar
  25. 25.
    Chen CC, Chang WH, Yoshimura K, et al. An efficient triple-junction polymer solar cell having a power conversion efficiency exceeding 11%. Adv Mater, 2014, 26: 5670–5677CrossRefGoogle Scholar
  26. 26.
    Zuo L, Chang CY, Chueh CC, et al. Design of a versatile interconnecting layer for highly efficient series-connected polymer tandem solar cells. Energy Environ Sci, 2015, 8: 1712–1718CrossRefGoogle Scholar
  27. 27.
    Li K, Li Z, Feng K, et al. Development of large band-gap conjugated copolymers for efficient regular single and tandem organic solar cells. J Am Chem Soc, 2013, 135: 13549–13557CrossRefGoogle Scholar
  28. 28.
    Cheng P, Yan C, Li Y, Ma W, Zhan X. Diluting concentrated solution: a general, simple and effective approach to enhance efficiency of polymer solar cells. Energy Environ Sci, 2015, 8: 2357–2364CrossRefGoogle Scholar
  29. 29.
    Chen LM, Hong Z, Li G, Yang Y. Recent progress in polymer solar cells: manipulation of polymer:fullerene morphology and the formation of efficient inverted polymer solar cells. Adv Mater, 2009, 21: 1434–1449CrossRefGoogle Scholar
  30. 30.
    Huang Y, Kramer EJ, Heeger AJ, Bazan GC. Bulk heterojunction solar cells: morphology and performance relationships. Chem Rev, 2014, 114: 7006–7043CrossRefGoogle Scholar
  31. 31.
    Liu F, Gu Y, Jung JW, Jo WH, Russell TP. On the morphology of polymer-based photovoltaics. J Polym Sci Part B Polym Phys, 2012, 50: 1018–1044CrossRefGoogle Scholar
  32. 32.
    Chen CC, Bae SH, Chang WH, et al. Perovskite/polymer monolithic hybrid tandem solar cells utilizing a low-temperature, full solution process. Mater Horiz, 2015, 2: 203–211CrossRefGoogle Scholar
  33. 33.
    Liu Y, Hong Z, Chen Q, et al. Integrated perovskite/bulk-heterojunction toward efficient solar cells. Nano Lett, 2015, 15: 662–668CrossRefGoogle Scholar
  34. 34.
    Wang K, Liu C, Du P, Zheng J, Gong X. Bulk heterojunction perovskite hybrid solar cells with large fill factor. Energy Environ Sci, 2015, 8: 1245–1255CrossRefGoogle Scholar
  35. 35.
    Liu C, Wang K, Du P, et al. Efficient solution-processed bulk heterojunction perovskite hybrid solar cells. Adv Energy Mater, 2015, 5, doi: 10.1002/aenm.1402024Google Scholar
  36. 36.
    Zuo C, Ding L. Bulk heterojunctions push the photoresponse of perovskite solar cells to 970 nm. J Mater Chem A, 2015, 3: 9063–9096CrossRefGoogle Scholar
  37. 37.
    Bijleveld JC, Zoombelt AP, Mathijssen SGJ, et al. Poly(diketopyrrolopyrrole- terthiophene) for ambipolar logic and photovoltaics. J Am Chem Soc, 2009, 131: 16616–16617CrossRefGoogle Scholar
  38. 38.
    Li W, Furlan A, Hendriks KH, Wienk MM, Janssen RAJ. Efficient tandem and triple-junction polymer solar cells. J Am Chem Soc, 2013, 135: 5529–5532CrossRefGoogle Scholar
  39. 39.
    Hendriks KH, Heintges GHL, Gevaerts VS, Wienk MM, Janssen RAJ. High-molecular-weight regular alternating diketopyrrolopyrrole-based terpolymers for efficient organic solar cells. Angew Chem Int Ed, 2013, 52: 8341–8344CrossRefGoogle Scholar
  40. 40.
    Ye L, Zhang S, Ma W, et al. From binary to ternary solvent: morphology fine-tuning of D/A blends in PDPP3T-based polymer solar cells. Adv Mater, 2012, 24: 6335–6341CrossRefGoogle Scholar
  41. 41.
    Ma W, Tumbleston JR, Ye L, et al. Quantification of nano-and mesoscale phase separation and relation to donor and acceptor quantum efficiency, Jsc, and FF in polymer:fullerene solar cells. Adv Mater, 2014, 26: 4234–4241CrossRefGoogle Scholar
  42. 42.
    Liu J, Shao S, Fang G, et al. High-efficiency inverted tandem polymer solar cells with step-Al-doped MoO3 interconnection layer. Sol Energy Mater Sol Cells, 2014, 120: 744–750CrossRefGoogle Scholar
  43. 43.
    Zhao W, Ye L, Zhang S, et al. Ultrathin polyaniline-based buffer layer for highly efficient polymer solar cells with wide applicability. Sci Rep, 2014, 4: 6570CrossRefGoogle Scholar
  44. 44.
    Guo X, Zhang M, Tan J, et al. Influence of D/A ratio on photovoltaic performance of a highly efficient polymer solar cell system. Adv Mater, 2012, 24: 6536–6541CrossRefGoogle Scholar
  45. 45.
    Dou L, Chen CC, Yoshimura K, et al. Synthesis of 5H-dithieno [3,2-b:2',3'-d]pyran as an electron-rich building block for donor–acceptor type low-bandgap polymers. Macromolecules, 2013, 46: 3384–3390CrossRefGoogle Scholar
  46. 46.
    Ye L, Zhou C, Meng H, et al. Toward reliable and accurate evaluation of polymer solar cells based on low band gap polymers. J Mater Chem C, 2015, 3: 564–569CrossRefGoogle Scholar

Copyright information

© Science China Press and Springer-Verlag Berlin Heidelberg 2015

Authors and Affiliations

  • Long Ye
    • 1
  • Benhu Fan
    • 1
  • Shaoqing Zhang
    • 1
  • Sunsun Li
    • 1
  • Bei Yang
    • 1
  • Yunpeng Qin
    • 1
  • Hao Zhang
    • 1
  • Jianhui Hou
    • 1
  1. 1.State Key Laboratory of Polymer Physics and Chemistry, Beijing National Laboratory for Molecular Sciences, Institute of ChemistryChinese Academy of Sciences (ICCAS)BeijingChina

Personalised recommendations