Correction to: Journal of Sustainable Metallurgy https://doi.org/10.1007/s40831-022-00639-0
Figure 9 in the article as originally published was mistakenly replaced with the graphic for Figure S1 in the Supplementary Material. The authors have also made a correction to the measurement instrument reported in the original figure caption (replacing NEO instrument with ProtIR). The correct figure and caption are presented below.
The original article has been corrected.
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Andersen, V., Solheim, I., Gaertner, H. et al. Correction to: Pilot-Scale Test of Flue Gas Recirculation for The Silicon Process. J. Sustain. Metall. 9, 93–94 (2023). https://doi.org/10.1007/s40831-023-00654-9