Abstract
A novel kind of supramolecular polymer filament with a diameter of 2–5 μm was artificially synthesized, which is in fact a bundle of self-assembled nanotubes with a diameter of about 40 nm. The filament can be drawn from a special alkaline aqueous solution directly and free standing in room temperature, which has never been performed earlier. Amicrotensile tester was developed with the aid of an electronic balance to investigate the mechanical properties of the new filament. Monotonic and load–unload tensile tests were performed, respectively. The maximum tensile strength and the elastic modulus of the filament were 23.8 MPa and 1.9 GPa, respectively, which were higher than previous supramolecular polymers and comparable to some covalent-linked polymers.
Similar content being viewed by others
References
Brunsveld L, Folmer BJB, Meijer EW, Sijbesma RP (2001) Supramolecular polymers. Chemical Reviews 101:4071–4098
Yang Z, Liang G, Ma ML, Gao Y, Xu B (2007) In vitro and in vivo enzymatic formation of supramolecular hydrogels based on self-assembled nanofibers of a β-amino acid derivative. Small 3:558–562
Wang YX, Shen JC (2005) Progress in non-viral gene delivery systems fabricated via supramolecular assembly. Chinese Science Bulletin 50(4):289–294
Hartgerink JD, Beniash E, Stupp SI (2001) Self-assembly and mineralization of peptideamphiphile nanofibers. Science 294:1684–1688
Zubarev ER, Pralle MU, Sone ED, Stupp SI (2002) Scaffolding of polymers by supramolecular nanoribbon. Advanced Materials 14:198–203
Kishimura A, Yamashita T, Yamaguchi K, Aida T (2005) Rewritable phosphorescent paper by thecontrol of competing kinetic and thermodynamic self-assembling events. Nature Materials 4:546–549
Wang H, Fang F, Li X, Fu C, Yang YJ (2012) Improved photostability of Vitamin A palmitate originating from self-assembled supramolecular gels. Chinese Science Bulletin 57(33):4257–4263
Narmoneva DA, Vukmirovic R, Davis ME, Kamm RD, Lee RT (2004) Endothelial cells promote cardiac myocyte survival and spatial reorganization implications for cardiac regeneration. Circulation 110:962–968
Rajangam K, Behanna HA, Hui MJ, Han XQ et al (2006) Heparin binding nanostructures to promote growth of blood vessels. Nano Letters 6:2086–2090
Ajayaghosh A, Varghese R, George SJ, Vijayakumar C (2006) Transcription and amplification of molecular chirality to oppositely biased supramolecular π helices. Angewandte Chemie 45:1141–1144
Mao CB, Solis DJ, Reiss BD et al (2004) Virus-based toolkit for the directed synthesis of magnetic and semiconducting nanowires. Science 303:213–217
Yagai S, Iwashima T, Kishikawa K, Nakahara S, Karatsu T, Kitamura A (2006) Photoresponsive self-assembly and self-organization of hydrogen-bonded supramolecular tapes. Chemistry—A European Journal 12:3984–3994
Eastoe J, Sanchez-Dominguez M, Wyatt P, Heenan RK (2004) A photo-responsive organogel. Chemical Communications 22:2608–2609
Aida T, Meijer EW, Stupp SI (2012) Functional supramolecular polymers. Science 33:5813–5817
Yang YL, Ma CR, Huang SJ, Jing LQ, Pang HT (2010) Effects of mechanical properties of Kevlar/PTFE fabric-reinforced self-lubricating liners on performance of self-lubricating spherical plain bearings. Applied Mechanics and Materials 29:197–202
Yu WD, Yan HJ, Postle R (2004) Estimating blend ratios from the tensile behavior of wool/polyester fiber bundles. Textile Research Journal 74:198–204
Yu MF, Dyer MJ, Skidmore GD (1999) Three-dimensional manipulation of carbon nanotubes under a scanning electron microscope. Nanotechnology 10:244–252
Yu MF, Lourie O, Dyer MJ, Moloni K, Kelly TF, Ruoff RS (2000) Strength and breaking mechanism of multiwalled carbon nanotubes under tensile load. Science 287:637–640
Tan EPS, Goh CN, Sow CH, Lim CT (2005) Tensile test of a single nanofiber using an atomic force microscope tip. Applied Physics Letters 86:1–3
Li XD, Wang XN, Chang WC, Chao YJ, Chang M (2005) Effect of tensile offset angles on micro/nanoscale tensile testing. Review of Scientific Instruments 76:1–4
Naraghi M, Chasiotis I, Kahn H, Wen Y, Dzenis Y (2007) Novel method for mechanical characterization of polymeric nanofibers. Review of Scientific Instruments 78:1–7
Demczyk BG, Wang YM, Cumings J et al (2002) Direct mechanical measurement of the tensile strength and elastic modulus of multiwalled carbon nanotubes. Materials Science and Engineering A 334:173–178
Kiuchi M, Matsui S, Isono Y (2007) Mechanical characteristics of FIB deposited carbon nanowires using an electrostatic actuated nano tensile testing device. Journal of Microelectromechanical Systems 16:191–201
Eppell SJ, Smith BN, Kahn H, Ballarini R (2006) Nano measurements with micro-devices: mechanical properties of hydrated collagen fibrils. Journal of the Royal Society Interface 3:117–121
Li X, Su D, Zhang Z (2009) A novel technique of microforce sensing and loading. Sensors and Actuators A 153:13–23
Huan Y, Zhang TH, Yang YM (2007) A moving-coil designed micro-mechanics tester with application on MEMS. Measurement Science and Technology 18:3612–3616
Hua T, Xie HM, Pan B, Qing XL, Dai FL, Feng XQ (2007) A new micro-tensile system for measuring the mechanical properties of low-dimensional materials—fibers and films. Polymer Testing 26:513–518
Skove MJ, Tritt TM, Ehrlich AC, Davis HS (1991) Device for simultaneously measuring stress, strain, and resistance in whiskerlike materials in the temperature range 1.5 K < T < 360 K. Review of Scientific Instruments 62:1010–1014
Pan ZW, Xie SS, Lu L et al (1999) Tensile tests of ropes of very long aligned multiwall carbon nanotubes. Applied Physics Letters 74:3152–3154
Ding JN, Meng YG, Wen SZ (2001) Scale dependence of tensile strength of micromachined polysilicon MEMS structures due to microstructural and dimensional constraints. Chinese Science Bulletin 46(16):1392–1397
Tan EPS, Ng SY, Lim CT (2005) Tensile testing of a single ultrafine polymeric fiber. Biomaterials 26:1453–1456
Inai R, Kotaki M, Ramakrishna S (2005) Structure and properties of electrospun PLLA single nanofibres. Nanotechnology 16:208–213
Huan Y, Liu DX, Yang R, Zhang TH (2010) Analysis of the practical force accuracy of electromagnetbased nanoindenters. Measurement 43:1090–1093
Liu YQ, Wang TY, Huan Y, Li ZB, He GW, Liu MH (2013) Self-assembled supramolecular nanotube yarn. Advanced Materials 25(41):5875–5879
Patricia YW, Dankers A, Ellen NM et al (2006) Chemical and biological properties of supramolecular polymer systems based on oligocaprolactones. Biomaterials 27:5490–5501
Sahin S, Yayla P (2005) Effects of testing parameters on the mechanical properties of polypropylene random copolymer. Polymer Testing 24:613–619
Acknowledgments
The authors gratefully acknowledge Professor He Guowei for his support. This work was supported by the National Natural Science Foundation of China (Grant nos 11372323, 11025212 and 11272318), the project of function development on scientific instruments of Chinese Academy of Sciences and Opening Fund of State Key Laboratory of Nonlinear Mechanics.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Huan, Y., Shao, Y.Q., Dai, Y.J. et al. Experimental Study of the Mechanical Properties of a Novel Supramolecular Polymer Filament Using a Microtensile Tester Based on Electronic Balance. Exp Tech 40, 737–742 (2016). https://doi.org/10.1007/s40799-016-0074-0
Published:
Issue Date:
DOI: https://doi.org/10.1007/s40799-016-0074-0