Abstract
Considering the advantages of multilayer pipes over metal and single layer ones as well as their new and increasing application in construction industry, testing these pipes has come into consideration to guarantee the quality of the pipes, and, consequently, prolong their life and increase the quality of building. A most prominent factor in multilayer pipes is the longitudinal seam-weld. If the aluminum layer is applied without welding, it may not affect the pipe’s strength. The welding normally employed involves butt or overlap using laser, ultrasonic, or tungsten inert gas (TIG) techniques. A defect-free weld can play a significant role in the pipe’s strength. Thus, a defect-free weld on the aluminum layer is a major factor in guaranteeing pipe’s quality. In this article, an apparatus for on-line testing of aluminum layer seam weld in multilayer pipes is presented which functions via an inductive proximity sensor. Finally, the results of several tests and defects detected are described.
Similar content being viewed by others
References
Nakano, T., “Non-Destructive Evaluation of Multi-layer Piping using Laser Ultrasonic Technique,” 1st International Symposium on Laser Ultrasonics: Science, Technology and Applications, Canada; July 2008.
ASTM Standard: F 1281–02, Standard Specification for Crosslinked Polyethylene/Aluminum/ Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe; 2002.
Postolache, O., Geirinhas Ramos, H., and Lopes Ribeiro, A., “Detection and Characterization of Defects Using GMR Probes and Artificial Neural Networks,” Journal of Computer Standards & Interfaces 33: 191–200 (2011).
Roberts, B., “Monitoring The Quality of Welded Tube and Pipe,” The Publication of Fabricators and Manufacturers Association International 25(8): 36–38 (1995).
Bae, K.Y., and Park, J.H., “A Study on Development of Inductive Sensor for Automatic Weld Seam Tracking,” Journal of Materials Processing Technology 176: 111–116 (2006).
Jagiella, M., and Fericean, S., “Miniaturized Inductive Sensors for Industrial Applications,” IEEE Sensor Journal 2: 771–778 (2002).
Drumea, A., Svasta, P., Blejan, M., “Modeling and Simulation of an Inductive Displacement Sensor for Mechatronic Systems,” Electronics Technology (ISSE), 33rd International Spring Seminar, IEEE Conference, pp. 304–307 (2010).
Passeraub, P.A., Besse, P.A., Bayadroun, A., Hediger, S., Bernasconi, E., and Popovic, R.S., “First integrated inductive proximity sensor with on-chip CMOS readout circuit and electrodeposited 1mm flat coil,” Sensors and Actuators 76: 273–278 (1999).
Tumanski, S., “Induction Coil Sensor-a review,” Journal of Measurement Science and Technology 18: 31–43 (2007).
Fericean, S., and Droxler, R., “New Non-contacting Inductive Analog Proximity and Inductive Linear Displacement Sensors for Industrial Automation,” IEEE Sensor Journal 7(11): 1538–1545 (2007).
Thoss, S., Machul, O., Hosticka, B.J., “A Novel Architecture for Inductive Proximity Sensors Using Sigma Delta Modulation,” Solid State Circuits IEEE Conference, pp. 284–287 (2007).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Riahi, M., Ebrahimi, N. Test Apparatus for On-line Butt-Welding Evaluation of Aluminum Layer in PEX-AL-PEX Multilayer Pipes. Exp Tech 40, 185–193 (2016). https://doi.org/10.1007/s40799-016-0023-y
Published:
Issue Date:
DOI: https://doi.org/10.1007/s40799-016-0023-y