Skip to main content
Log in

Positioning Devices For Measuring Spatial Velocity Correlations in Turbulent Swirl Flow in the Pipe by Hot-Wire Probes

  • Published:
Experimental Techniques Aims and scope Submit manuscript

Abstract

Measuring spatial correlations of velocity is done by simultaneous measurement of velocity vector in two different measuring points. Usually, the points should be at a very small distance. While performing correlation measurements in turbulent swirling flow in the pipe, it is necessary to have very precise positioning of hot-wire probes, both by angle and distance. In this research, measurements of spatial correlations in such flow field are performed, for two different cases: velocity correlations in two points on different radial distance and in two points on different axial distance, parallel to the pipe axis. For such measurements two original devices for positioning of hot-wire probes are developed. With these devices appropriate angle positioning and radial and axial distance of hot-wire probes are achieved. Cross-correlation diagrams are also given in this article, as an illustration of capabilities of these original devices for hot-wire probes positioning.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Similar content being viewed by others

References

  1. Lečic, M.R., Theoretical and Experimental Investigation of Turbulent Swirling Flows, PhD Thesis, Faculty of Mechanical Engineering, Belgrade (2003).

  2. Stewart, R.W., “Triple Velocity Correlations in Isotropic Turbulence,” Proceedings of the Cambridge Philosophical Society 47: 146–157 (1951).

    Article  Google Scholar 

  3. Favre, A.J., “Review on Space-time Correlations in Turbulent Fluids,” Transactions on ASME (E) Journal of Applied Mechanics 32: 541–557 (1965).

    Google Scholar 

  4. Laufer, J., “The Structure of Turbulence in Fully Developed Pipe Flow,” NACA Report 1174 (1954).

  5. Dean, R.B., and Bradshaw, P., “Measurements of Interacting Turbulent Shear Layers in a Duct,” Journal of Fluid Mechanics 78: 641–676 (1976).

    Article  Google Scholar 

  6. Frenkiel, F.N., and Klebanoff, P.S., “Higher-order Correlations in a Turbulent Field,” Physics of Fluids 10(3): 507–520 (1967).

    Article  Google Scholar 

  7. Frenkiel, F.N., and Klebanoff, P.S., “Correlation Measurement in a Turbulent Flow Using High-speed Computing Methods,” Physics of Fluids 10: 1737–1747 (1967).

    Article  Google Scholar 

  8. Van Atta, C.W., and Chen, W.Y., “Correlation Measurements in Grid Turbulence Using Digital Harmonic Analysis,” Journal of Fluid Mechanics 34: 497–515 (1969).

    Article  Google Scholar 

  9. Chatellier, L., and Fitzpatrick, J., “Spatio-temporal Correlation Analysis of Turbulent Flow Using Global and Single-point Measurements,” Experiments in Fluids 38: 563–575 (2005).

    Article  Google Scholar 

  10. Benišek, M.H., “Investigation of the Hydrodynamic Stability of Swirl Flow in Axisymmetric Rotation Fields,” MSc Thesis, Faculty of Mechanical Engineering, Belgrade (1976).

  11. Benišek, M.H., “Investigation of the Swirl Flow in Pipes,” PhD Thesis, Faculty of Mechanical Engineering, Belgrade (1979).

  12. Lečić, M.R., Ćoćić, A.S., and Čantrak, S.M., “Original Measuring and Calibration Equipment for Investigation of Turbulent Swirling Flow in Circular Pipe,” Experimental Techniques. Accepted. Article first published online: 14 February 2012. doi:10.1111/j.1747-1567.2012.00812.x

  13. Vukašinović, B., “Turbulent Transport and Problem of Modeling in Swirling Flow,” MSc Thesis, Faculty of Mechanical Engineering, Belgrade (1996).

  14. Kitoh, O., “Experimental Study of Turbulent Swirling Flow in a Straight Pipe,” Journal of Fluid Mechanics 225: 445–479 (1991).

    Article  Google Scholar 

  15. Č antrak, S.M., “Experimental Investigation of the Statistical Properties of Swirling Flows in Pipes and Diffusers,” Ph.D. Thesis, Karlsruhe (1981).

  16. Lečić, M., Radojević, S., Č antrak, D.J., and Ćoćić, A. “V-type Hot Wire Probe Calibration,” FME Transactions, University of Belgrade, Faculty of Mechanical Engineering, Belgrade, New Series, Vol. 35, Number 2, 55–62. UDC:621,YU ISSN 1451–2092 (2007).

  17. Benišek, M., Ilić, D., Dj, Č., and Božić, I., “Investigation of Turbulent Swirl Flows in a Conical Diffuser,” Thermal Science 14: S141–S154 (2010).

    Article  Google Scholar 

  18. Vukoslavčević, P., and Petrović, D., Multiple Hot-wire Probes, Montenigrin Academy of Sciences and Arts, Special Edition, Vol. 39, Section of Natural Science Education No. 21, Podgorica (2000).

  19. Benišek, M.H., Lečić, M.R., Ilić, D.B., and Čantrak, D.S., “Application of New Classic Probes in Swirl Fluid Flow Measurements,” Experimental Techniques 34: 74–81 (2010).

    Article  Google Scholar 

  20. Lečić, M.R., “A New Experimental Approach to the Calibration of Hot-wire Probes,” Flow Measurement Instrumentation 20(3): 136–140 (2009).

    Article  Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to M. R. Lečić.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Lečić, M.R., Ćoćić, A.S. & Čantrak, S.M. Positioning Devices For Measuring Spatial Velocity Correlations in Turbulent Swirl Flow in the Pipe by Hot-Wire Probes. Exp Tech 40, 121–128 (2016). https://doi.org/10.1007/s40799-016-0018-8

Download citation

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s40799-016-0018-8

Keywords

Navigation