Abstract
The elastomeric O-ring is used as a packing element in the diverse parts of industrial system, such as the high pressure vessel, the oil supply equipment, the aerospace component, and the nuclear power plant etc. The design criterion of O-ring was determined by analyzed results of stress and the deforming behavior at various loading conditions related with sealing pressure and fit condition. The shape of O-ring was changed according to the squeeze rate, the sealing pressure, and time. At last, the study of deforming behavior and distribution of internal stress distribution from the constant squeezing O-ring with various sealing pressures was carried out on the real-time observation. To realize the experimental progress, we developed a specific loading device for the hybrid transmission photoelasticity under the continuous applying of the sealing pressure for squeeze rate. The O-ring was infiltrated into the space gap between the low-sidewall and the front-sidewall while the test load was forcing out. The analysis using the photoelastic model experiment of interior stress field in the constant squeezing of O-ring seal evidently gave a solution to predict the characteristic fracture of elastomeric sealing material.
Similar content being viewed by others
References
Douglass, H. W., Collins, J. H., Jr., Ellis, R. A., Keller, R. B., Jr., Solid Rocket Motor Nozzles. NASA SP-8115 (1975).
McDonald, A. J., “Lessons Learned but Forgotten from the Space Shuttle Challenger Accident,” Space 2004 Conference and Exhibit, San Diego, California, AIAA 2004–5830, 2004.
Nikas, G.K., “Eighty Years of Research on Hydraulic Reciprocating Seals: Review of Tribological Studies and Related Topics Since the 1930s,” Proceedings of IMechE Part J: Journal of Engineering Tribology 224: 1–23 (2010).
Golerik, B.M., Bukhina, M.F., and Ratner, A.V., “Variation of the Contact Area in the Deformation of Rubber Cylinders and Rings,” Soviet Rubber Technology 20: 10–14 (1961).
Golerik, B.M., and Fel‘dman, G.I., “Failure of Rubber Sealing Rings of Circular Transverse Section under the Action of Stresses,” Soviet Rubber Technology 23: 21–23 (1964).
Strozzi, A., “Static Stresses in an Unpressurized, Rounded, Rectangular, Elastomeric Seal,” Asle Transactions 29: 558–564 (1986).
George, A.F., Strozzi, A., and Rich, J.I., “Stress Fields in a Compressed Unconstrained Elastomeric O-Ring Seal and a Comparison of Computer Predictions With Experimental Results,” Tribology International 20: 237–247 (1987).
Dragoni, E., and Strozzi, A., “Theoretical Analysis of an Unpressurized Elastomeric O-Ring Seal into a Rectangular Groove,” Elsevier Sequoia, Wear 130: 41–51 (1989).
Dragoni, E., and Strozzi, A., “Analysis of an Unpressurized, Laterally Restrained, Elastomeric O-Ring Seal,” Journal of Tribology 110: 193–200 (1988).
Karaszkiewicz, A., “Geometry and Contact Pressure of an O-Ring Mounted in a Seal Groove,” Industrial and Engineering Chemistry Research 29: 2134–2137 (1990).
Ö ngü n, Y., Andre´ , M., Bartel, D., and Deters, L., “An Axisymmetric Hydrodynamic Interface Element for Finite-Element Computations of Mixed Lubrication in Rubber Seals,” Proceedings of IMechE, Part J: J of Engineering Tribology 222(J3): 471–481 (2008). DOI: 10.1243/13506501JET393.
Stupkiewicz, S., and Marciniszyn, A., “Elastohydrodynamic Lubrication and Finite Configuration Changes in Reciprocating Seals,” Tribology International 42(5): 615–627 (2009).
Yokoyama, K., Okazaki, M., and Komito, T., “Effect of Contact Pressure and Thermal Degradation on the Sealability of O-Ring,” JSAE Review 19: 123–128 (1998).
Johannesson, H., “Calculation of the Pressure Distribution in an O-Ring Seal Contact,” Proceedings of. 5th Leeds-Lyon Symposium on Tribology, 379–387, 1978.
Molari, P. G., “Stresses in O-Ring Gaskets,” 6th International Conference on Fluid Sealing, BHRA, B2/15-31, 1973.
Durelli, J., Parks, V.J., and Feng, H., “Experimental Methods of Large Strain Analysis,” International Journal of Non-Linear Mechanics 2: 387–404 (1967).
Nam, J.H., Hawong, J.S., Han, S.L., and Park, S.H., “Contact Stress of O-Ring under Uniform Squeeze Rate by Photoelastic Experimental Hybrid Method,” Journal of Mechanical Science and Technology 22: 2337–2349 (2008).
Nam, J.H., Hawong, J.S., Han, S.L., Kwon, O.S., and Park, S.H., “A Study on the Analysis of O-Ring Under Uniform Squeeze Rate and Internal Pressure by Photoelastic Experimental Hybrid Method,” Journal of Mechanical Science and Technology 23: 2330–2340 (2009).
Nam, J., Hawong, J., Kim, K., Yi, L., Kwon, O., and Park, S., “A Study on the Development of a Loading Device Using a Photoelastic Stress Freezing Method for the Analysis of O-Ring Stress,” Journal of Mechanical Science and Technology 24: 693–701 (2010).
Shukla, A., and Nigam, H., “A Numerical-Experimental Analysis of the Contact Stress Problem,” Journal of Strain Analysis for Engineering Design 20(4): 241–245 (1985).
Hills, D. A., Nowell, D., Sackfield, A., Mechanics of Elastic Contacts. Butterworth-Heinemann, USA (1993).
Hawong, J.S., Shin, D.C., and Lee, H.J., “Photoelastic Experimental Hybrid Method for Fracture Mechanics of Anisotropic Materials,” Experimental Mechanics 41(1): 92–99 (2001).
Shin, D.C., and Hawong, J.S., “Development of a Hybrid Method of Reflection Photoelasticity for Crack Problems in Anisotropic Plates,” Experimental Mechanics 51(2): 183–198 (2011).
Dally, J.W., and Riley, W.F., Experimental Stress Analysis, McGraw-Hill, New York (1991).
Ramesh, K., and Tiwari, N., “A Brief Review on Photo Orthotropic Elasticity Theories,” Sādhanā 18(6): 985–997 (1993).
Parker O-Ring Handbook. Parker Hannifin Corporation, O-Ring Division, Cleveland, OH (2007).
Park, S. H., Evaluation of the Large Deformation Behavior and the Effect of Design Parameters of O-Ring, PhD Thesis, Chungnam National University (2008).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Shin, DC., Nam, JH. & Kim, DW. Experimental Interior Stress Fields of a Constantly Squeezed O-Ring Modeling from Hybrid Transmission Photoelasticity. Exp Tech 40, 59–72 (2016). https://doi.org/10.1007/s40799-016-0010-3
Published:
Issue Date:
DOI: https://doi.org/10.1007/s40799-016-0010-3