Abstract
Data analysis is used as a common method in modern science research, which is across communication science, computer science and biology science. Clustering, as the basic composition of data analysis, plays a significant role. On one hand, many tools for cluster analysis have been created, along with the information increase and subject intersection. On the other hand, each clustering algorithm has its own strengths and weaknesses, due to the complexity of information. In this review paper, we begin at the definition of clustering, take the basic elements involved in the clustering process, such as the distance or similarity measurement and evaluation indicators, into consideration, and analyze the clustering algorithms from two perspectives, the traditional ones and the modern ones. All the discussed clustering algorithms will be compared in detail and comprehensively shown in Appendix Table 22.
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
1 Introduction
Clustering, considered as the most important question of unsupervised learning, deals with the data structure partition in unknown area and is the basis for further learning. The complete definition for clustering, however, isn’t come to an agreement, and a classic one is described as follows [1]:

(1)
Instances, in the same cluster, must be similar as much as possible;

(2)
Instances, in the different clusters, must be different as much as possible;

(3)
Measurement for similarity and dissimilarity must be clear and have the practical meaning;
The standard process of clustering can be divided into the following several steps [2]:

(1)
Feature extraction and selection: extract and select the most representative features from the original data set;

(2)
Clustering algorithm design: design the clustering algorithm according to the characteristics of the problem;

(3)
Result evaluation: evaluate the clustering result and judge the validity of algorithm;

(4)
Result explanation: give a practical explanation for the clustering result;
In the rest of this paper, the common similarity and distance measurements will be introduced in Sect. 2, the evaluation indicators for the clustering result will be listed in section 3, the traditional clustering algorithms and the modern ones will be analyzed systematically respectively in Sects. 4 and 5, and the final conclusion will be drawn in Sect. 6.
2 Distance and Similarity
Distance (dissimilarity) and similarity are the basis for constructing clustering algorithms. As for quantitative data features, distance is preferred to recognize the relationship among data. And similarity is preferred when dealing with qualitative data features [2].
The common used distance functions for quantitative data feature are summarized in Table 1.
The common used similarity functions for qualitative data feature are summarized in Table 2.
3 Evaluation Indicator
The main purpose of evaluation indicator is to test the validity of algorithm. Evaluation indicators can be divided into two categories, the internal evaluation indicators and the external evaluation indicators, in terms of the test data whether in the process of constructing the clustering algorithm.
The internal evaluation takes the internal data to test the validity of algorithm. It, however, can’t absolutely judge which algorithm is better when the scores of two algorithms are not equal based on the internal evaluation indicators [5]. There are three commonly used internal indicators, summarized in Table 3.
The external evaluation, which is called as the gold standard for testing method, takes the external data to test the validity of algorithm. However, it turns out that the external evaluation is not completely correct recently [6]. There are six common used external evaluation indicators, summarized in Table 4.
In the following sections, especially in the analysis of time complexity, n stands for the number of total objects/data points, k stands for the number of clusters, s stands for the number of sample objects/data points, and t stands for the number of iterations.
4 Traditional Clustering Algorithms
The traditional clustering algorithms can be divided into 9 categories which mainly contain 26 commonly used ones, summarized in Table 5.
4.1 Clustering Algorithm Based on Partition
The basic idea of this kind of clustering algorithms is to regard the center of data points as the center of the corresponding cluster. Kmeans [7] and Kmedoids [8] are the two most famous ones of this kind of clustering algorithms. The core idea of Kmeans is to update the center of cluster which is represented by the center of data points, by iterative computation and the iterative process will be continued until some criteria for convergence is met. Kmediods is an improvement of Kmeans to deal with discrete data, which takes the data point, most near the center of data points, as the representative of the corresponding cluster. The typical clustering algorithms based on partition also include PAM [9], CLARA [10], CLARANS [11].
For more information about this kind of clustering algorithms, you can refer to [12–14].
Analysis:

(1)
Time complexity (Table 6):

(2)
Advantages: relatively low time complexity and high computing efficiency in general;

(3)
Disadvantages: not suitable for nonconvex data, relatively sensitive to the outliers, easily drawn into local optimal, the number of clusters needed to be preset, and the clustering result sensitive to the number of clusters.;

(4)
AP algorithm [15], which will be discussed in the section Clustering algorithm based on affinity propagation, can also be considered as one of this kind of clustering algorithm.
4.2 Clustering Algorithm Based on Hierarchy
The basic idea of this kind of clustering algorithms is to construct the hierarchical relationship among data in order to cluster [16]. Suppose that each data point stands for an individual cluster in the beginning, and then, the most neighboring two clusters are merged into a new cluster until there is only one cluster left. Or, a reverse process. Typical algorithms of this kind of clustering include BIRCH [17], CURE [18], ROCK [19], Chameleon [20]. BIRCH realizes the clustering result by constructing the feature tree of clustering, CF tree, of which one node stands for a subcluster. CF tree will dynamically grow when a new data point comes. CURE, suitable for largescale clustering, takes random sampling technique to cluster sample separately and integrates the results finally. ROCK is an improvement of CURE for dealing with data of enumeration type, which takes the effect on the similarity from the data around the cluster into consideration. Chameleon, at first, divides the original data into clusters with smaller size based on the nearest neighbor graph, and then the clusters with small size are merged into a cluster with bigger size, based on agglomerative algorithm, until satisfied.
For more information about this kind of clustering algorithms, you can refer to [21, 22].
Analysis:

(1)
Time complexity (Table 7):

(2)
Advantages: suitable for the data set with arbitrary shape and attribute of arbitrary type, the hierarchical relationship among clusters easily detected, and relatively high scalability in general;

(3)
Disadvantages: relatively high in time complexity in general, the number of clusters needed to be preset.
4.3 Clustering Algorithm Based on Fuzzy Theory
The basic idea of this kind of clustering algorithms is that the discrete value of belonging label, {0, 1}, is changed into the continuous interval [0, 1], in order to describe the belonging relationship among objects more reasonably. Typical algorithms of this kind of clustering include FCM [23–25], FCS [26] and MM [27]. The core idea of FCM is to get membership of each data point to every cluster by optimizing the object function. FCS, different from the traditional fuzzy clustering algorithms, takes the multidimensional hypersphere as the prototype of each cluster, so as to cluster with the distance function based on the hypersphere. MM, based on the Mountain Function, is used to find the center of cluster.
For more information about this kind of clustering algorithms, you can refer to [28–30].
Analysis:

1)
Time complexity (Table 8):

2)
The time complexity of FCS is high for the kernel involved in the algorithm;

3)
Advantages: more realistic to give the probability of belonging, relatively high accuracy of clustering;

4)
Disadvantages: relatively low scalability in general, easily drawn into local optimal, the clustering result sensitive to the initial parameter values, and the number of clusters needed to be preset.
4.4 Clustering Algorithm Based on Distribution
The basic idea is that the data, generated from the same distribution, belongs to the same cluster if there exists several distributions in the original data. The typical algorithms are DBCLASD [31] and GMM [32]. The core idea of DBCLASD, a dynamic incremental algorithm, is that if the distance between a cluster and its nearest data point satisfies the distribution of expected distance which is generated from the existing data points of that cluster, the nearest data point should belong to this cluster. The core idea of GMM is that GMM consists of several Gaussian distributions from which the original data is generated and the data, obeying the same independent Gaussian distribution, is considered to belong to the same cluster.
For more information about this kind of clustering algorithms, you can refer to [33, 34].
Analysis:

(1)
Time complexity (Table 9):

(2)
Advantages: more realistic to give the probability of belonging, relatively high scalability by changing the distribution, number of clusters and so on, and supported by the well developed statistical science;

(3)
Disadvantages: the premise not completely correct, involved in many parameters which have a strong influence on the clustering result and relatively high time complexity.
4.5 Clustering Algorithm Based on Density
The basic idea of this kind of clustering algorithms is that the data which is in the region with high density of the data space is considered to belong to the same cluster [35]. The typical ones include DBSCAN [36], OPTICS [37] and Meanshift [38]. DBSCAN is the most well known densitybased clustering algorithm, which is generated from the basic idea of this kind of clustering algorithms directly. OPTICS is an improvement of DBSCAN and it overcomes the shortcoming of DBSCAN that being sensitive to two parameters, the radius of the neighborhood and the minimum number of points in a neighborhood. In the process of Meanshift, the mean of offset of current data point is calculated at first, the next data point is figured out based on the current data point and the offset then, and last, the iteration will be continued until some criteria are met.
For more information about this kind of clustering algorithms, you can refer to [39–42].
Analysis:

(1)
Time complexity (Table 10):

(2)
The time complexity of Meanshift is high for the kernel involved in the algorithm;

(3)
Advantages: clustering in high efficiency and suitable for data with arbitrary shape;

(4)
Disadvantages: resulting in a clustering result with low quality when the density of data space isn’t even, a memory with big size needed when the data volume is big, and the clustering result highly sensitive to the parameters;

(5)
DENCLUE algorithm [43], which will be discussed in the section Clustering algorithm for largescale data, can also be considered as one of this kind of clustering algorithms.
4.6 Clustering Algorithm Based on Graph Theory
According to this kind of clustering algorithms, clustering is realized on the graph where the node is regarded as the data point and the edge is regarded as the relationship among data points. Typical algorithms of this kind of clustering are CLICK [44] and MSTbased clustering [45]. The core idea of CLICK is to carry out the minimum weight division of the graph with iteration in order to generate the clusters. Generating the minimum spanning tree from the data graph is the key step to do the cluster analysis for the MSTbased clustering algorithm.
For more detailed information about this kind of clustering algorithms, you can refer to [1, 20, 46–49].
Analysis:

(1)
Time complexity (Table 11):
where v stands for the number of vertices, e stands for the number of edges, and f(v, e) stands for the time complexity of computing a minimum cut;

(2)
Advantages: clustering in high efficiency, the clustering result with high accuracy;

(3)
Disadvantages: the time complexity increasing dramatically with the increasing of graph complexity;

(4)
SM algorithm [50] and NJW algorithm [51], which will be discussed in the section Clustering algorithm based on spectral graph theory, can also be considered as ones of this kind of clustering algorithms.
4.7 Clustering Algorithm Based on Grid
The basic idea of this kind of clustering algorithms is that the original data space is changed into a grid structure with definite size for clustering. The typical algorithms of this kind of clustering are STING [52] and CLIQUE [53]. The core idea of STING which can be used for parallel processing is that the data space is divided into many rectangular units by constructing the hierarchical structure and the data within different structure levels is clustered respectively. CLIQUE takes advantage of the gridbased clustering algorithms and the densitybased clustering algorithms.
For more detailed information about this kind of clustering algorithms, you can refer to [41, 54–57].
Analysis:

(1)
Time complexity (Table 12):

(2)
Advantages: low time complexity, high scalability and suitable for parallel processing and increment updating;

(3)
Disadvantages: the clustering result sensitive to the granularity (the mesh size), the high calculation efficiency at the cost of reducing the quality of clusters and reducing the clustering accuracy;

4)
Wavecluster algorithm [54], which will be discussed in the section Clustering algorithm for spatial data, can also be considered as ones of this kind of clustering algorithms.
4.8 Clustering Algorithm Based on Fractal Theory
Fractal stands for the geometry that can be divided into several parts which share some common characters with the whole [58]. The typical algorithm of this kind of clustering is FC [59] of which the core idea is that the change of any inner data of a cluster does not have any influence on the intrinsic quality of the fractal dimension.
For more detailed information about this kind of clustering algorithms, you can refer to [60–63].
Analysis:

(1)
The time complexity of FC is O(n);

(2)
Advantages: clustering in high efficiency, high scalability, dealing with outliers effectively and suitable for data with arbitrary shape and high dimension;

(3)
Disadvantages: the premise not completely correct, the clustering result sensitive to the parameters.
4.9 Clustering Algorithm Based on Model
The basic idea is to select a particular model for each cluster and find the best fitting for that model. There are mainly two kinds of modelbased clustering algorithms, one based on statistical learning method and the other based on neural network learning method.
The typical algorithms, based on statistical learning method, are COBWEB [64] and GMM [32]. The core idea of COBWEB is to build a classification tree, based on some heuristic criteria, in order to realize hierarchical clustering on the assumption that the probability distribution of each attribute is independent. The typical algorithms, based on neural network learning method, are SOM [65] and ART [66–69]. The core idea of SOM is to build a mapping of dimension reduction from the input space of high dimension to output space of low dimension on the assumption that there exists topology in the input data. The core idea of ART, an incremental algorithm, is to generate a new neuron dynamically to match a new pattern to create a new cluster when the current neurons are not enough. GMM has been discussed in the section Clustering algorithm based on distribution.
For more detailed information about this kind of clustering algorithms, you can refer to [70–75].
Analysis:

(1)
Time complexity (Table 13):

(2)
The time complexity of COBWEB is generally low, which depends on the distribution involved in the algorithm;

(3)
The time complexity of SOM is generally high, which depends on the layer construction involved in the algorithm;

(4)
The time complexity of ART is generally middle, which depends on the type of ART and the layer construction involved in the algorithm;

(5)
Advantages: diverse and well developed models providing means to describe data adequately and each model having its own special characters that may bring about some significant advantages in some specific areas;

(6)
Disadvantages: relatively high time complexity in general, the premise not completely correct, and the clustering result sensitive to the parameters of selected models.
5 Modern Clustering Algorithms
The modern clustering algorithms can be divided into 10 categories which mainly contain 45 commonly used ones, summarized in Table 14.
5.1 Clustering Algorithm Based on Kernel
The basic idea of this kind of clustering algorithms is that data in the input space is transformed into the feature space of high dimension by the nonlinear mapping for the cluster analysis. The typical algorithms of this kind of clustering include kernel Kmeans [76], kernel SOM [77], kernel FCM [78], SVC [79], MMC [80] and MKC [81]. The basic idea of kernel Kmeans, kernel SOM and kernel FCM is to take advantage of the kernel method and the original clustering algorithm, transforming the original data into a high dimensional feature space by nonlinear kernel function in order to carry out the original clustering algorithm. The core idea of SVC is to find the sphere with the minimum radius that can cover all the data point in the high dimensional feature space, then map the sphere back into the original data space to form the isoline, namely the border of clusters, covering the data, and the data in the closed isoline should belong to the same cluster. MMC tries to find the hyperplane with the maximum margin to cluster and it can be promoted for the multilabel clustering problem. MKC, an improvement of MMC, tries to find the best hyperplane based on several kernels to cluster. MMC and MKC share the limitation of computation to a degree.
For more detailed information about this kind of clustering algorithms, you can refer to [82–84].
Analysis:

(1)
Time complexity (Table 15):

(2)
The time complexity of this kind of clustering algorithms is generally high for the kernel involved in the algorithm;

(3)
Advantages: more easy to cluster in the high dimensional feature space, suitable for data with arbitrary shape, able to analyze the noise and separate the overlapping clusters, and not needed to have the preliminary knowledge about the topology of data;

(4)
Disadvantages: the clustering result sensitive to the type of kernel and its parameters, time complexity being high, and not suitable for largescale data.
5.2 Clustering Algorithm Based on Ensemble
Clustering algorithm based on ensemble is also called ensemble clustering, of which the core idea is to generate a set of initial clustering results by a particular method and the final clustering result is got by integrating the initial clustering results. There are mainly 4 kinds of methods to get the set of initial clustering results as follows:

(1)
For the same data set, employ the same algorithm with the different parameters or the different initial conditions [85];

(2)
For the same data set, employ the different algorithms [86];

(3)
For the subsets, carry out the clustering respectively [86];

(4)
For the same data set, carry out the clustering in different feature spaces based on different kernels [87].
The initial clustering results are integrated by means of the consensus function. The consensus functions can be divided into the following 9 categories, summarized in Table 16:
For more detailed information about this kind of clustering algorithms, you can refer to [95].
Analysis:

(1)
The time complexity of this kind of algorithm is based on the specific method and algorithms involved in the algorithm;

(2)
Advantages: robust, scalable, able to be parallel and taking advantage of the strengths of the involved algorithms;

(3)
Disadvantages: inadequate understanding about the difference among the initial clustering results, existing deficiencies of the design of the consensus function.
5.3 Clustering Algorithm Based on Swarm Intelligence
The basic idea of this kind of clustering algorithms is to simulate the changing process of the biological population. Typical algorithms include the 4 main categories: ACO_based [96, 97], PSO_based [97, 98], SFLA_based [99] and ABC_based [100]. The core idea of LF [101], the typical algprithm of the ACO_based, is that data is distributed randomly on the grid of two dimensions first, then the data is selected or not for further operation based on the decision of an ant and this process is iterated until a satisfactory clustering result is got. The PSO_based algorithms regard the data point as a particle. The initial clusters of particles is got by the other clustering algorithm first, then the clusters of particles is updated continuously based on the center of clusters and the location and speed of each particle, until a satisfactory clustering result is got. The core idea of the SFLA_based algorithms is to simulate the information interaction of frogs and taking advantage of the local search and the global information interaction. The core idea of the ABC_based algorithms is to simulate the foraging behavior of three types of bee, of which the duty is to determine the food source, in a bee population and making use of the exchange of local information and global information for clustering.
For more detailed information about this kind of clustering algorithms, you can refer to [102–104].
Analysis:

(1)
Time complexity (Table 17):

(2)
The time complexity of this kind of algorithm is high, mainly for the large number of iterations;

(3)
Advantages: algorithm with the character of overcoming being easily drawn into local optimal and getting the global optimal, easy to understand the algorithm;

(4)
Disadvantages: low scalability, low operating efficiency and not suitable for high dimensional or largescale data.
5.4 Clustering Algorithm Based on Quantum Theory
The clustering algorithm based on quantum theory is called quantum clustering, of which the basic idea is to study the distribution law of sample data in the scale space by studying the distribution law of particles in the energy field. The typical algorithms of this kind include QC [105, 106] and DQC [107]. The core idea of QC (quantum clustering), suitable for high dimensional data, is to get the potential energy of each object by Schrodinger Equation using the iterative gradient descent algorithm, regard the object with low potential energy as the center of the cluster, and put the objects into different clusters by the defined distance function. DQC, an improvement of QC, adopts the timebased Schrodinger Equation in order to study the change of the original data set and the structure of the quantum potential energy function dynamically.
For more detailed information about this kind of clustering algorithms, you can refer to [108–110].
Analysis:

(1)
Time complexity (Table 18):

(2)
The time complexity of QC is high, for the process of solving the Schrodinger Equation and the large number of iterations;

(3)
The time complexity of DQC which is more practical compared with DQ, is middle for the process of solving the Schrodinger Equation;

(4)
Advantages: the number of parameters involved in this kind of algorithm being small, the determination of the center of a cluster based on the potential information of sample data;

(5)
Disadvantages: the clustering result sensitive to the parameters of the algorithm, the algorithm model not able to describe the change law of data completely.
5.5 Clustering Algorithm Based on Spectral Graph Theory
The basic idea of this kind of clustering algorithms is to regard the object as the vertex and the similarity among objects as the weighted edge in order to transform the clustering problem into a graph partition problem. And the key is to find a method of graph partition making the weight of connection between different groups small as much as possible and the total weight of connection among the edges within the same group high as much as possible [111]. The typical algorithms of this kind of clustering can be mainly divided into two categories, recursive spectral and multiway spectral and the typical algorithms of this two categories are SM [50] and NJW [51] respectively. The core idea of SM which is usually used for image segmentation is to minimize Normalized Cut by heuristic method, based on the eigenvector. And NJW carries out the clustering analysis in the feature space constructed by the eigenvectors corresponding to the k largest eigenvalues of the Laplacian matrix.
For more detailed information about this kind of clustering algorithms, you can refer to [51, 84, 112–114].
Analysis:

(1)
Time complexity (Table 19):

(2)
The time complexity of SM is high, for the process of figuring out the eigenvectors and the heuristic method involved in the algorithm;

(3)
The time complexity of NJW is high, for the process of figuring out the eigenvectors;

(4)
Advantages: suitable for the data set with arbitrary shape and high dimension, converged to the global optimal, only the similarity matrix needed as the input, and not sensitive to the outliers;

(5)
Disadvantages: the clustering result sensitive to the scaling parameter, time complexity relatively high, unclear about the construction of similarity matrix, the selection of eigenvector not optimized and the number of clusters needed to be preset.
5.6 Clustering Algorithm Based on Affinity Propagation
AP (affinity propagation clustering) is a significant algorithm, which was proposed in Science in 2007. The core idea of AP is to regard all the data points as the potential cluster centers and the negative value of the Euclidean distance between two data points as the affinity. So, the sum of the affinity of one data point for other data points is bigger, the probability of this data point to be the cluster center is higher. AP algorithm takes the greedy strategy which maximizes the value of the global function of the clustering network during every iteration [15].
For more detailed information about this kind of clustering algorithms, you can refer to [115–117].
Analysis:

(1)
The time complexity of AP is O(n\(\hat{\,\,}\)2*logn);

(2)
Advantages: simply and clear algorithm idea, insensitive to the outliers and the number of clusters not needed to be preset;

(3)
Disadvantages: high time complexity, not suitable for very large data set, and the clustering result sensitive to the parameters involved in AP algorithm.
5.7 Clustering Algorithm Based on Density and Distance
DD (Density and distancebased clustering) is another significant clustering algorithm proposed in Science in 2014 [118], of which the core idea is novel. And the main characteristic of DD is for the description of the cluster center, which is shown as follows:

(1)
with high local density: the number of data points near the cluster center within a certain scope must be big enough;

(2)
away from other data points with high local density: cluster center must be away from other data points that could be the center of a cluster.
The core idea of DD is to figure out, based on the distance function, the local density of each data point and the shortest distance among each data point and other data points with higher local density in order to construct the decision graph first, select the cluster centers based on the decision graph then, and put the remaining data points into the nearest cluster with higher local density at last.
Analysis:

(1)
The time complexity of DD is O(n\(\hat{\,\,}\)2);

(2)
Advantages: simply and clear algorithm idea, suitable for the data set with arbitrary shape and insensitive to the outliers;

(3)
Disadvantages: relatively high time complexity, relatively strong subjectivity for the selection of the cluster center based on the decision graph and the clustering result sensitive to the parameters involved in DD algorithm.
5.8 Clustering Algorithm for Spatial Data
Spatial data refers to the data with the two dimensions, time and space, at the same time, sharing the characteristics of large in scale, high in speed and complex in information. The typical algorithms of this kind of clustering include DBSCAN [36], STING [52], Wavecluster [54] and CLARANS [11]. The core idea of Wavecluster which can be used for parallel processing is to carry out the clustering in the new feature space by applying the Wavelet Transform to the original data. And the core idea of CLARANS is to sample based on CLARA [10] and carry out clustering by PAM [9]. DBSCAN has been discussed in the section Clustering algorithm based on density and STING has been discussed in the section Clustering algorithm based on grid.
For more detailed information about this kind of clustering algorithms, you can refer to [119–122], STDBSCAN [123].
Time complexity (Table 20):
5.9 Clustering Algorithm for Data Stream
Data stream shares the characteristics of arriving based on sequence, large in scale and limited frequency of reading. The typical algorithms of this kind of clustering include STREAM [124], CluStream [125], HPStream [126], DenStream [127] and the latter three are incremental algorithms. STREAM, based on the idea of divide and conquer, deals with the data successively according to the sequence of data arriving in order to construct the hierarchical clustering structure. CluStream, which mainly deals with the shortcoming of STREAM that only describing the original data statically, regards data as a dynamic changing process. So CluStream can not only give the timely response for a request, but it also gives the clustering result in terms of different time granularities by figuring out the Microclusters online and offline. HPStream, an improvement of CluStream, takes the attenuation of data’s influence over time into consideration and is more suitable for clustering data with high dimension. DenStream, which takes the core idea of the clustering algorithm based on density, is suitable for the nonconvex data set and can deal with outliers efficiently, compared with the algorithms mentioned above in this section.
For more detailed information about this kind of clustering algorithms, you can refer to [128–131], DStream [41, 132].
Time complexity (Table 21):
The time complexity of CluStream, HPStream and DenStream is involved in the online and offline processes.
5.10 Clustering Algorithm for LargeScale Data
Big data shares the characteristics of 4 V’s, large in volume, rich in variety, high in velocity and doubt in veracity [133]. The main basic ideas of clustering for big data can be summarized in the following 4 categories:
 (1)
 (2)
 (3)
 (4)
Typical algorithms of this kind of clustering are Kmeans [7], BIRCH [17], CLARA [10], CURE [18], DBSCAN [36], DENCLUE [43], Wavecluster [54] and FC [59].
For more detailed information about this kind of clustering algorithms, you can refer to [2, 13, 140, 141].
The time complexity of DENCLUE is O(nlogn) and the complexities of Kmeans, BIRCH, CLARA, CURE, DBSCAN, Wavecluster and FC have been described before in other sections.
6 Conclusions
This paper starts at the basic definitions of clustering and the typical procedure, lists the commonly used distance (dissimilarity) functions, similarity functions, and evaluation indicators that lay the foundation of clustering, and analyzes the clustering algorithms from two perspectives, the traditional ones that contain 9 categories including 26 algorithms and the modern ones that contain 10 categories including 45 algorithms. The detailed and comprehensive comparisons of all the discussed clustering algorithms are summarized in Appendix Table 22.
The main purpose of the paper is to introduce the basic and core idea of each commonly used clustering algorithm, specify the source of each one, and analyze the advantages and disadvantages of each one. It is hard to present a complete list of all the clustering algorithms due to the diversity of information, the intersection of research fields and the development of modern computer technology. So 19 categories of the commonly used clustering algorithms, with high practical value and well studied, are selected and one or several typical algorithm(s) of each category is(are) discussed in detail so as to give readers a systematical and clear view of the important data analysis method, clustering.
References
Jain A, Dubes R (1988) Algorithms for clustering data. PrenticeHall, Inc, Upper Saddle River
Xu R, Wunsch D (2005) Survey of clustering algorithms. IEEE Trans Neural Netw 16:645–678
Everitt B, Landau S, Leese M (2001) Clustering analysis, 4th edn. Arnold, London
Gower J (1971) A general coefficient of similarity and some of its properties. Biometrics 27:857–871
EstivillCastro V (2002) Why so many clustering algorithms: a position paper. ACM SIGKDD Explor Newsl 4:65–75
Färber I, Günnemann S, Kriegel H, Kröger P, Müller E, Schubert E, Seidl T, Zimek A (2010) On using classlabels in evaluation of clusterings. In MultiClust: 1st international workshop on discovering, summarizing and using multiple clusterings held in conjunction with KDD, Washington, DC
MacQueen J (1967) Some methods for classification and analysis of multivariate observations. Proc Fifth Berkeley Symp Math Stat Probab 1:281–297
Park H, Jun C (2009) A simple and fast algorithm for Kmedoids clustering. Expert Syst Appl 36:3336–3341
Kaufman L, Rousseeuw P (1990) Partitioning around medoids (program pam). Finding groups in data: an introduction to cluster analysis. Wiley, Hoboken
Kaufman L, Rousseeuw P (2008) Finding groups in data: an introduction to cluster analysis, vol 344. Wiley, Hoboken. doi:10.1002/9780470316801
Ng R, Han J (2002) Clarans: a method for clustering objects for spatial data mining. IEEE Trans Knowl Data Eng 14:1003–1016
Boley D, Gini M, Gross R, Han E, Hastings K, Karypis G, Kumar V, Mobasher B, Moore J (1999) Partitioningbased clustering for web document categorization. Decis Support Syst 27:329–341
Jain A (2010) Data clustering: 50 years beyond Kmeans. Pattern Recognit Lett 31:651–666
Velmurugan T, Santhanam T (2011) A survey of partition based clustering algorithms in data mining: an experimental approach. Inf Technol J 10:478–484
Frey BJ, Dueck D (2007) Clustering by passing messages between data points. Science 315(5814):972–976
Johnson S (1967) Hierarchical clustering schemes. Psychometrika 32:241–254
Zhang T, Ramakrishnan R, Livny M (1996) BIRCH: an efficient data clustering method for very large databases. ACM SIGMOD Rec 25:103–104
Guha S, Rastogi R, Shim K (1998) CURE: an efficient clustering algorithm for large databases. ACM SIGMOD Rec 27:73–84
Guha S, Rastogi R, Shim K (1999) ROCK: a robust clustering algorithm for categorical attributes. In: Proceedings of the 15th international conference on data engineering, pp 512521
Karypis G, Han E, Kumar V (1999) Chameleon: hierarchical clustering using dynamic modeling. Computer 32:68–75
Murtagh F (1983) A survey of recent advances in hierarchical clustering algorithms. Comput J 26:354–359
Carlsson G, Mémoli F (2010) Characterization, stability and convergence of hierarchical clustering methods. J Mach Learn Res 11:1425–1470
Dunn J (1973) A fuzzy relative of the ISODATA process and its use in detecting compact wellseparated clusters. J Cybern 3:32–57
Bezdek J (1981) Pattern recognition with fuzzy objective function algorithms. Plenum, New York
Bezdek J, Ehrlich R, Full W (1984) FCM: the fuzzy cmeans clustering algorithm. Comput Geosci 10:191–203
Dave R, Bhaswan K (1992) Adaptive fuzzy cshells clustering and detection of ellipses. IEEE Trans Neural Netw 3:643–662
Yager R, Filev D (1994) Approximate clustering via the mountain method. IEEE Trans Syst Man Cybern 24:1279–1284
Yang M (1993) A survey of fuzzy clustering. Math Comput Model 18:1–16
Baraldi A, Blonda P (1999) A survey of fuzzy clustering algorithms for pattern recognition. I. IEEE Trans Syst Man Cybern Part B 29:778–785
Höppner F (1999) Fuzzy cluster analysis: methods for classification, data analysis and image recognition. Wiley, Hoboken
Xu X, Ester M, Kriegel H, Sander J (1998) A distributionbased clustering algorithm for mining in large spatial databases. In: Proceedings of the fourteenth international conference on data engineering, pp 324331
Rasmussen C (1999) The infinite Gaussian mixture model. Adv Neural Inf Process Syst 12:554–560
Preheim S, Perrotta A, MartinPlatero A, Gupta A, Alm E (2013) Distributionbased clustering: using ecology to refine the operational taxonomic unit. Appl Environ Microbiol 79:6593–6603
Jiang B, Pei J, Tao Y, Lin X (2013) Clustering uncertain data based on probability distribution similarity. IEEE Trans Knowl Data Eng 25:751–763
Kriegel H, Kröger P, Sander J, Zimek A (2011) Densitybased clustering. Wiley Interdiscip Rev 1:231–240
Ester M, Kriegel H, Sander J, Xu X (1996) A densitybased algorithm for discovering clusters in large spatial databases with noise. In: Proceedings of the second ACM SIGKDD international conference on knowledge discovery and data mining, pp 226–231
Ankerst M, Breunig M, Kriegel H, Sander J (1999) OPTICS: ordering points to identify the clustering structure. In: Proceedings on 1999 ACM SIGMOD international conference on management of data, vol 28, pp 49–60
Comaniciu D, Meer P (2002) Mean shift: a robust approach toward feature space analysis. IEEE Trans Pattern Anal Mach Intell 24:603–619
Januzaj E, Kriegel H, Pfeifle M (2004) Scalable densitybased distributed clustering. In: Proceedings of the 8th european conference on principles and practice of knowledge discovery in databases, pp 231–244
Kriegel H, Pfeifle M (2005) Densitybased clustering of uncertain data. In: Proceedings of the eleventh ACM SIGKDD international conference on knowledge discovery in data mining, pp 672–677
Chen Y, Tu L (2007) Densitybased clustering for realtime stream data. In: Proceedings of the 13th ACM SIGKDD international conference on knowledge discovery and data mining, pp 133–142
Duan L, Xu L, Guo F, Lee J, Yan B (2007) A localdensity based spatial clustering algorithm with noise. Inf Syst 32:978–986
Hinneburg A, Keim D (1998) An efficient approach to clustering in large multimedia databases with noise. In Proceedings of the 4th ACM SIGKDD international conference on knowledge discovery and data mining 98: 58–65
Sharan R, Shamir R (2000) CLICK: a clustering algorithm with applications to gene expression analysis. In: Proc international conference intelligent systems molecular biolgy, pp 307–316
Jain A, Murty M, Flynn P (1999) Data clustering: a review. ACM Comput Surv (CSUR) 31:264–323
BenDor A, Shamir R, Yakhini Z (1999) Clustering gene expression patterns. J Comput Biol 6:281–297
Hartuv E, Shamir R (2000) A clustering algorithm based on graph connectivity. Inf Process Lett 76:175–181
EstivillCastro V, Lee I (2000) Amoeba: hierarchical clustering based on spatial proximity using delaunay diagram. In: Proceedings of the 9th international symposium on spatial data handling, Beijing
Cherng J, Lo M (2001) A hypergraph based clustering algorithm for spatial data sets. In: Proceedings of the 2001 IEEE international conference on data mining, pp 83–90
Shi J, Malik J (2000) Normalized cuts and image segmentation. IEEE Trans Pattern Anal Mach Intell 22:888–905
Ng A, Jordan M, Weiss Y (2002) On spectral clustering: analysis and an algorithm. Adv Neural Inf Process Syst 2:849–856
Wang W, Yang J, Muntz R (1997) STING: a statistical information grid approach to spatial data mining. In VLDB, pp 186–195
Agrawal R, Gehrke J, Gunopulos D, Raghavan P (1998) Automatic subspace clustering of high dimensional data for data mining applications. In: Proceedings 1998 ACM sigmod international conference on management of data, vol 27, pp 94–105
Sheikholeslami G, Chatterjee S, Zhang A (1998) Wavecluster: A multiresolution clustering approach for very large spatial databases. In: VLDB, pp 428–439
Ma E, Chow T (2004) A new shifting grid clustering algorithm. Pattern Recognit 37:503–514
Park N, Lee W (2004) Statistical gridbased clustering over data streams. ACM SIGMOD Rec 33:32–37
Pilevar A, Sukumar M (2005) GCHL: a gridclustering algorithm for highdimensional very large spatial data bases. Pattern Recognit Lett 26:999–1010
Mandelbrot B (1983) The fractal geometry of nature. Macmillan, London
Barbará D, Chen P (2000) Using the fractal dimension to cluster datasets. In: Proceedings of the sixth ACM SIGKDD international conference on knowledge discovery and data mining, pp 260–264
Zhang A, Cheng B, Acharya R (1996) A fractalbased clustering approach in large visual database systems. In Representation and retrieval of visual media in, multimedia systems, pp 49–68
Menascé D, Abrahao B, Barbará D, Almeida V, Ribeiro F (2002) Fractal characterization of web workloads. In: Proceedings of the “ Web Engineering” Track of WWW2002, pp 7–11
Barry R, Kinsner W (2004) Multifractal characterization for classification of network traffic. Conf Electr Comput Eng 3:1453–1457
AlShammary D, Khalil I, Tari Z (2014) A distributed aggregation and fast fractal clustering approach for SOAP traffic. J Netw Comput Appl 41:1–14
Fisher D (1987) Knowledge acquisition via incremental conceptual clustering. Mach Learn 2:139–172
KohonenKohonen T (1990) The selforganizing map. Proc IEEE 78:1464–1480
Carpenter G, Grossberg S (1987) A massively parallel architecture for a selforganizing neural pattern recognition machine. Comput Vis Gr Image Process 37:54–115
Carpenter G, Grossberg S (1988) The ART of adaptive pattern recognition by a selforganizing neural network. Computer 21:77–88
Carpenter G, Grossberg S (1987) ART 2: selforganization of stable category recognition codes for analog input patterns. Appl Opt 26:4919–4930
Carpenter G, Grossberg S (1990) ART 3: hierarchical search using chemical transmitters in selforganizing pattern recognition architectures. Neural Netw 3:129–152
Meilă M, Heckerman D (2001) An experimental comparison of modelbased clustering methods. Mach Learn 42:9–29
Fraley C, Raftery A (2002) Modelbased clustering, discriminant analysis, and density estimation. J Am Stat Assoc 97:611–631
McLachlan G, Bean R, Peel D (2002) A mixture modelbased approach to the clustering of microarray expression data. Bioinformatics 18:413–422
Medvedovic M, Sivaganesan S (2002) Bayesian infinite mixture model based clustering of gene expression profiles. Bioinformatics 18:1194–1206
Zhong S, Ghosh J (2003) A unified framework for modelbased clustering. J Mach Learn Res 4:1001–1037
McNicholas P, Murphy T (2010) Modelbased clustering of microarray expression data via latent Gaussian mixture models. Bioinformatics 26:2705–2712
Schölkopf B, Smola A, Müller K (1998) Nonlinear component analysis as a kernel eigenvalue problem. Neural Comput 10:1299–1319
MacDonald D, Fyfe C (2000) The kernel selforganising map. Proc Fourth Int Conf KnowlBased Intell Eng Syst Allied Technol 1:317–320
Wu Z, Xie W,Yu J (2003) Fuzzy cmeans clustering algorithm based on kernel method. In: Proceedings of the fifth ICCIMA, pp 49–54
BenHur A, Horn D, Siegelmann H, Vapnik V (2002) Support vector clustering. J Mach Learn Res 2:125–137
Xu L, Neufeld J, Larson B, Schuurmans D (2004) Maximum margin clustering. In: Advances in neural information processing systems, pp 1537–1544
Zhao B, Kwok J, Zhang C (2009) Multiple kernel clustering. In SDM, pp 638–649
Müller K, Mika S, Rätsch G, Tsuda K, Schölkopf B (2001) An introduction to kernelbased learning algorithms. IEEE Trans Neural Netw 12:181–201
Girolami M (2002) Mercer kernelbased clustering in feature space. IEEE Trans Neural Netw 13:780–784
Filippone M, Camastra F, Masulli F, Rovetta S (2008) A survey of kernel and spectral methods for clustering. Pattern Recognit 41:176–190
Fred A, Jain A (2005) Combining multiple clusterings using evidence accumulation. IEEE Trans Pattern Anal Mach Intell 27:835–850
Strehl A, Ghosh J (2003) Cluster ensembles—a knowledge reuse framework for combining multiple partitions. J Mach Learn Res 3:583–617
Fern X, Brodley C (2003) Random projection for high dimensional data clustering: a cluster ensemble approach. ICML 3:186–193
Dimitriadou E, Weingessel A, Hornik K (2001) Votingmerging: an ensemble method for clustering. In: ICANN, pp 217–224
Topchy A, Jain A, Punch W (2004) A mixture model for clustering ensembles. In: Proceedings of the SIAM international conference on data mining, pp 379
Topchy A, Jain A, Punch W (2005) Clustering ensembles: models of consensus and weak partitions. IEEE Trans Pattern Anal Mach Intell 27:1866–1881
Yoon H, Ahn S, Lee S, Cho S, Kim J (2006) Heterogeneous clustering ensemble method for combining different cluster results. In: Data mining for biomedical applications, pp 82–92
Domeniconi C, Gunopulos D, Ma S, Yan B, AlRazgan M, Papadopoulos D (2007) Locally adaptive metrics for clustering high dimensional data. Data Min Knowl Discov 14:63–97
VegaPons S, CorreaMorris J, RuizShulcloper J (2010) Weighted partition consensus via kernels. Pattern Recognit 43:2712–2724
Punera K, Ghosh J (2008) Consensusbased ensembles of soft clusterings. Appl Artif Intell 22:780–810
VegaPons S, RuizShulcloper J (2011) A survey of clustering ensemble algorithms. Int J Pattern Recognit Artif Intell 25:337–372
Handl J, Meyer B (2007) Antbased and swarmbased clustering. Swarm Intell 1:95–113
Abraham A, Das S, Roy S (2008) Swarm intelligence algorithms for data clustering. In: Soft computing for knowledge discovery and data mining, pp 279–313
Van der Merwe D, Engelbrecht A (2003) Data clustering using particle swarm optimization. Congr Evol Comput 1:215–220
Amiri B, Fathian M, Maroosi A (2009) Application of shuffled frogleaping algorithm on clustering. Int J Adv Manuf Technol 45:199–209
Karaboga D, Ozturk C (2011) A novel clustering approach: artificial bee colony (ABC) algorithm. Appl Soft Comput 11:652–657
Lumer E, Faieta B (1994) Diversity and adaptation in populations of clustering ants. Proc Third Int Conf Simul Adapt Behav 3:501–508
Shelokar P, Jayaraman V, Kulkarni B (2004) An ant colony approach for clustering. Anal Chim Acta 509:187–195
Karaboga D, Akay B (2009) A survey: algorithms simulating bee swarm intelligence. Artif Intell Rev 31:61–85
Xu R, Xu J, Wunsch D (2012) A comparison study of validity indices on swarmintelligencebased clustering. IEEE Trans Syst Man Cybern Part B 42:1243–1256
Horn D, Gottlieb A (2001) Algorithm for data clustering in pattern recognition problems based on quantum mechanics. Phys Rev Lett 88:018702
Horn D, Gottlieb A (2001) The method of quantum clustering. In: Advances in neural information processing systems, pp 769–776
Weinstein M, Horn D (2009) Dynamic quantum clustering: a method for visual exploration of structures in data. Phys Rev E 80:066117
Horn D (2001) Clustering via Hilbert space. Phys A 302:70–79
Horn D, Axel I (2003) Novel clustering algorithm for microarray expression data in a truncated SVD space. Bioinformatics 19:1110–1115
Aïmeur E, Brassard G, Gambs S (2007) Quantum clustering algorithms. In: ICML, pp 1–8
Von Luxburg U (2007) A tutorial on spectral clustering. Stat Comput 17:395–416
Yu S, Shi J (2003) Multiclass spectral clustering. In: Proceedings of the ninth IEEE international conference on computer vision, pp 313–319
Verma D, Meila M (2003) A comparison of spectral clustering algorithms. University of Washington Tech Rep UWCSE030501 1: 1–18
Chen W, Song Y, Bai H, Lin C, Chang E (2011) Parallel spectral clustering in distributed systems. IEEE Trans Pattern Anal Mach Intell 33:568–586
Lu Z, CarreiraPerpinan M (2008) Constrained spectral clustering through affinity propagation. In: IEEE conference on computer vision and pattern recognition, pp 1–8
Givoni I, Frey B (2009) A binary variable model for affinity propagation. Neural Comput 21:1589–1600
Shang F, Jiao L, Shi J, Wang F, Gong M (2012) Fast affinity propagation clustering: a multilevel approach. Pattern Recognit 45:474–486
Rodriguez A, Laio A (2014) Clustering by fast search and find of density peaks. Science 344:1492–1496
Ng R, Han J (1994) Efficient and effective clustering methods for spatial data mining. In: VLDB, pp 144–155
Sander J, Ester M, Kriegel H, Xu X (1998) Densitybased clustering in spatial databases: the algorithm gdbscan and its applications. Data Min Knowl Discov 2:169–194
Harel D, Koren Y (2001) Clustering spatial data using random walks. In: Proceedings of the seventh ACM SIGKDD international conference on knowledge discovery and data mining, pp 281–286
Zaïane O, Lee C (2002) Clustering spatial data when facing physical constraints. In: Proceedings of the IEEE international conference on data mining, pp 737–740
Birant D, Kut A (2007) STDBSCAN: an algorithm for clustering spatialtemporal data. Data Knowl Eng 60:208–221
O’callaghan L, Meyerson A, Motwani R, Mishra N, Guha S (2002) Streamingdata algorithms for highquality clustering. In: ICDE, p 0685
Aggarwal C, Han J, Wang J, Yu P (2003) A framework for clustering evolving data streams. In: VLDB, pp 81–92
Aggarwal C, Han J, Wang J, Yu P (2004) A framework for projected clustering of high dimensional data streams. In: VLDB, pp 852–863
Cao F, Ester M, Qian W, Zhou A (2006) Densitybased clustering over an evolving data stream with noise. SDM 6:328–339
Guha S, Mishra N, Motwani R, O’Callaghan L (2000) Clustering data streams. In: Proceedings of the 41st annual symposium on foundations of computer science, pp 359–366
Barbará D (2002) Requirements for clustering data streams. ACM SIGKDD Explor Newsl 3:23–27
Guha S, Meyerson A, Mishra N, Motwani R, O’Callaghan L (2003) Clustering data streams: theory and practice. IEEE Trans Knowl Data Eng 15:515–528
Beringer J, Hüllermeier E (2006) Online clustering of parallel data streams. Data Knowl Eng 58:180–204
Silva J, Faria E, Barros R, Hruschka E, de Carvalho A, Gama J (2013) Data stream clustering: a survey. ACM Comput Surv 46:13
Leskovec J, Rajaraman A, Ullman JD (2014) Mining massive datasets. Cambridge University Press, Cambridge
Steinbach M, Karypis G, Kumar V (2000) A comparison of document clustering techniques. KDD Workshop Text Min 400:525–526
Parsons L, Haque E, Liu H (2004) Subspace clustering for high dimensional data: a review. ACM SIGKDD Explor Newsl 6:90–105
Kriegel H, Kröger P, Zimek A (2009) Clustering highdimensional data: a survey on subspace clustering, patternbased clustering, and correlation clustering. ACM Trans Knowl Discov Data 3:1
Judd D, McKinley P, Jain A (1996) Largescale parallel data clustering. In: Proceedings of the 13th international conference on pattern recognition, vol 4, pp 488–493
Tasoulis D, Vrahatis M (2004) Unsupervised distributed clustering. In: Parallel and distributed computing and networks, pp 347–351
Zhao W, Ma H, He Q (2009) Parallel kmeans clustering based on mapreduce. In: Cloud computing, pp 674–679
Herwig R, Poustka A, Müller C, Bull C, Lehrach H, O’Brien J (1999) Largescale clustering of cDNAfingerprinting data. Genome Res 9:1093–1105
Hinneburg A, Keim D (2003) A general approach to clustering in large databases with noise. Knowl Inf Syst 5:387–415
Acknowledgments
This work has been partially supported by grants form National Natural Science Foundations of China (Nos. 61472390, 11271361, 71331005, and 11226089), Major International (Regional) Joint Research Project (No. 71110107026).
Author information
Authors and Affiliations
Corresponding author
Appendix
Appendix
Rights and permissions
About this article
Cite this article
Xu, D., Tian, Y. A Comprehensive Survey of Clustering Algorithms. Ann. Data. Sci. 2, 165–193 (2015). https://doi.org/10.1007/s4074501500401
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s4074501500401