1 Correction to: International Journal of Precision Engineering and Manufacturing-Green Technology https://doi.org/10.1007/s40684-021-00399-4
Due to an unfortunate oversight the Declaration section has been omitted. It should be read:
Acknowledgements
This work was supported by KITECH general project grant (#EH210006) from Korea Ministry of Economy and Finance in 2020.
Declarations
Conflict of interest
The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper.
Data availability
The raw/processed data to regenerate the findings cannot be shared due to copyright reasons.
Authors contributions
UA: Methodology, Software, Investigation, Validation, Writing-original draft. NK: Conceptualization, Methodology. C-SK: Conceptualization, Methodology. TVL: Investigation, Validation. JC: Investigation, Validation. D-HK: Conceptualization, Methodology, Writing-review & editing.
The original article has been corrected.
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Auyeskhan, U., Kim, N., Kim, CS. et al. Correction to: Design Approach for Additive Manufacturing of a Dynamically Functioning System: Lifeboat Hook. Int. J. of Precis. Eng. and Manuf.-Green Tech. 9, 1585 (2022). https://doi.org/10.1007/s40684-022-00428-w
Published:
Issue Date:
DOI: https://doi.org/10.1007/s40684-022-00428-w