Abstract
This study considers the performance of a direct methanol fuel cell (DMFC) unit for the various compression ratios of a gas diffusion layer (GDL) on the cathode side. A performance of fuel cells is significantly influenced by the compression ratio of the GDL. The compression ratio of the GDL can be directly controlled by the concentration compression force at the central area of the cell and gasket thickness. The balancing of the compression ratio is an important factor to increase the unit cell performance of DMFCs. In this study, the performance test of the unit cell for varying compression ratio of a GDL on the cathode side is carried out. We describe how the compression ratio affects the stack performance by the variation of compression force for two different kinds of current collectors, which directly compresses the central area of the unit cell with varying gasket thickness. This study also suggests a method to show the effect of mass transport loss by amplitude of voltage fluctuation and the unit cell relationship between the pressure drop information and the peak power of the unit cell.
Article PDF
Similar content being viewed by others
References
Cruickshank, J. and Scott, K., “The Degree and Effect of Methanol Crossover in the Direct Methanol Fuel Cell,” Journal of Power Sources, Vol. 70, No. 1, pp. 40–47, 1998.
Kjeang, E., Goldak, J., Golriz, M. R., Gu, J., James, D., et al., “A Parametric Study of Methanol Crossover in a Flowing Electrolytedirect Methanol Fuel Cell,” Journal of Power Sources, Vol. 153, No. 1, pp. 89–99, 2006.
Du, C. Y., Zhao, T. S., and Yang, W., “Effect of Methanol Crossover on the Cathode Behavior of a DMFC: A Half-cell Investigation,” Electrochimica Acta, Vol. 52, No. 16, pp. 5266–5271, 2007.
Chen, C., Shiu, J., and Lee, Y., “Development of a Small DMFC Bipolar Plate Stack for Portable Applications,” Journal of Power Sources, Vol. 159, No. 2, pp. 1042–1047, 2006.
Liu, Y., Xie, X., Shang, Y., Li, R., Qi, L., et al., “Power Characteristics and Fluid Transfer in 40W Direct Methanol Fuel Cell Stack,” Journal of Power Sources, Vol. 164, No. 1, pp. 322–327, 2007.
Hwang, Y. S., Lee, D. Y., Kim, S. Y., Cha, S. W., and Choi, H., “Influence of Flow Channel Design on the Flow Pressure Drop and the Performance of Direct Methanol Fuel Cells,” Journal of Fuel Cell Science and Technology, Vol. 6, No. 1, Paper No. 011023, 2009.
Gurau, V., Bluemle, M. J., De Castro, E. S., Tsou, Y. M., Mann Jr, J. A., et al., “Characterization of Transport Properties in Gas Diffusion Layers for Proton Exchange Membrane Fuel Cells: 1. Wettability (Internal Contact Angle to Water and Surface Energy of GDL Fibers),” Journal of Power Sources, Vol. 160, No. 2, pp. 1156–1162, 2006.
Gurau, V., Bluemle, M. J., De Castro, E. S., Tsou, Y. M., Zawodzinski Jr, T. A., et al., “Characterization of Transport Properties in Gas Diffusion Layers for Proton Exchange Membrane Fuel Cells: 2. Absolute Permeability,” Journal of Power Sources, Vol. 165, No. 2, pp. 793–802, 2007.
Lim, C. and Wang, C., “Effects of Hydrophobic Polymer Content in GDL on Power Performance of a PEM Fuel Cell,” Electrochimica Acta, Vol. 49, No. 24, pp. 4149–4156, 2004.
Litster, S., Sinton, D., and Djilali, N., “Ex Situ Visualization of Liquid Water Transport in PEM Fuel Cell Gas Diffusion Layers,” Journal of Power Sources, Vol. 154, No. 1, pp. 95–105, 2006.
Pasaogullari, U. and Wang, C., “Liquid Water Transport in Gas Diffusion Layer of Polymer Electrolyte Fuel Cells,” Journal of the Electrochemical Society, Vol. 151, No. 3, pp. A399–A406, 2004.
Pasaogullari, U., Mukherjee, P. P., Wang, C. Y., and Chen, K. S., “Anisotropic Heat and Water Transport in a PEFC Cathode Gas Diffusion Layer,” Journal of The Electrochemical Society, Vol. 154, No. 8, pp. B823–B834, 2007.
Kong, C. S., Kim, D. Y., Lee, H. K., Shul, Y. G., and Lee, T. H., “Influence of Pore-size Distribution of Diffusion Layer on Masstransport Problems of Proton Exchange Membrane Fuel Cells,” Journal of Power Sources, Vol. 108, No. 1, pp. 185–191, 2002.
Jordan, L., Shukla, A., Behrsing, T., Avery, N., Muddle, B., et al., “Effect of Diffusion-layer Morphology on the Performance of Polymer Electrolyte Fuel Cells Operating at Atmospheric Pressure,” Journal of Applied Electrochemistry, Vol. 30, No. 6, pp. 641–646, 2000.
Jordan, L., Shukla, A., Behrsing, T., Avery, N., Muddle, B., and Forsyth, M., “Diffusion Layer Parameters Influencing Optimal Fuel Cell Performance,” Journal of Power Sources, Vol. 86, No. 1, pp. 250–254, 2000.
Lee, H. K., Park, J. H., Kim, D. Y., and Lee, T. H., “A Study on the Characteristics of the Diffusion Layer Thickness and Porosity of the PEMFC,” Journal of Power Sources, Vol. 131, No. 1, pp. 200–206, 2004.
Chu, H. S., Yeh, C., and Chen, F., “Effects of Porosity Change of Gas Diffuser on Performance of Proton Exchange Membrane Fuel Cell,” Journal of Power Sources, Vol. 123, No. 1, pp. 1–9, 2003.
Su, Z., Liu, C., Chang, H., Li, C., Huang, K., et al., “A Numerical Investigation of the Effects of Compression Force on PEM Fuel Cell Performance,” Journal of Power Sources, Vol. 183, No. 1, pp. 182–192, 2008.
Hottinen, T. and Himanen, O., “Pemfc Temperature Distribution Caused by Inhomogeneous Compression of GDL,” Electrochemistry Communications, Vol. 9, No. 5, pp. 1047–1052, 2007.
Escribano, S., Blachot, J. F., Ethève, J., Morin, A., and Mosdale, R., “Characterization of PEMFCs Gas Diffusion Layers Properties,” Journal of Power Sources, Vol. 156, No. 1, pp. 8–13, 2006.
Lee, W. K., Ho, C. H., van Zee, J., and Murthy, M., “The Effects of Compression and Gas Diffusion Layers on the Performance of a PEM Fuel Cell,” Journal of Power Sources, Vol. 84, No. 1, pp. 45–51, 1999.
Ge, J., Higier, A., and Liu, H., “Effect of Gas Diffusion Layer Compression on PEM Fuel Cell Performance,” Journal of Power Sources, Vol. 159, No. 2, pp. 922–927, 2006.
Sui, P. and Djilali, N., “Analysis of Coupled Electron and Mass Transport in the Gas diffusion Layer of a PEM Fuel Cell,” Journal of Power Sources, Vol. 161, No. 1, pp. 294–300, 2006.
Sun, W., Peppley, B. A., and Karan, K., “Modeling the Influence of GDL and Flow-field Plate Parameters on the Reaction Distribution in the PEMFC Cathode Catalyst Layer,” Journal of Power Sources, Vol. 144, No. 1, pp. 42–53, 2005.
Yi, J. S. and van Nguyen, T., “Multicomponent Transport in Porous Electrodes of Proton Exchange Membrane Fuel Cells using the Interdigitated Gas Distributors,” Journal of The Electrochemical Society, Vol. 146, No. 1, pp. 38–45, 1999.
Zhou, P., Wu, C., and Ma, G., “Influence of Clamping Force on the Performance of PEMFCs,” Journal of Power Sources, Vol. 163, No. 2, pp. 874–881, 2007.
Zhou, P. and Wu, C., “Numerical Study on the Compression Effect of Gas Diffusion Layer on PEMFC Performance,” Journal of Power Sources, Vol. 170, No. 1, pp. 93–100, 2007.
Nitta, I., Hottinen, T., Himanen, O., and Mikkola, M., “Inhomogeneous Compression of PEMFC Gas Diffusion layer: Part I. Experimental,” Journal of Power Sources, Vol. 171, No. 1, pp. 26–36, 2007.
Hottinen, T., Himanen, O., Karvonen, S., and Nitta, I., “Inhomogeneous Compression of PEMFC Gas Diffusion Layer: Part II. Modeling the Effect,” Journal of Power Sources, Vol. 171, No. 1, pp. 113–121, 2007.
Zhu, Y., Liu, C., Liang, J., and Wang, L., “Investigation of the Effects of Compression Pressure on Direct Methanol Fuel Cell,” Journal of Power Sources, Vol. 196, No. 1, pp. 264–269, 2011.
Choi, H., Hwang, Y. S., Lee, D. Y., Kim, S. Y., and Cha, S. W., “Effect of Cathode Gasket Thickness to Performance of Direct Methanol Fuel Cells”, Proc. of the ASME 6th International Conference on Fuel Cell Science, Engineering and Technology, Paper No. FuelCell2008-65067, pp. 865–870, 2008.
Kuan, Y. D. and Chang, C. H., “Experimental Investigation on the Process-induced Damage of a Direct Methanol Fuel Cell Assembled by the Printed Circuit Board Technique,” Journal of Fuel Cell Science and Technology, Vol. 6, No. 1, Paper No. 011016, 2009.
Hwang, Y. S., Lee, D. Y., Kim, S. Y., Cha, S. W., and Choi, H., “Influence of Flow Channel Design on the Flow Pressure Drop and the Performance of Direct Methanol Fuel Cells,” Journal of Fuel Cell Science and Technology, Vol. 6, No. 1, Paper No. 011023, 2009.
Choi, H., Cho, G. Y., and Cha, S. W., “Fabrication and Characterization of Anode Supported YSZ/GDC Bilayer Electrolyte SOFC using Dry Press Process,” Int. J. Precis. Eng. Manuf.-Green Tech., Vol. 1, No. 2, pp. 95–99, 2014.
Seo, Y. H., Kim, H. J., Jang, W. K., and Kim, B. H., “Development of Active Breathing Micro PEM Fuel Cell,” Int. J. Precis. Eng. Manuf.-Green Tech., Vol. 1, No. 2, pp. 101–106, 2014.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Hwang, YS., Choi, H., Cho, G.Y. et al. Effect of compression thickness on performance of gas diffusion layer of direct methanol fuel cells. Int. J. of Precis. Eng. and Manuf.-Green Tech. 1, 215–221 (2014). https://doi.org/10.1007/s40684-014-0027-y
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s40684-014-0027-y