Skip to main content

Thermal cracking simulation of functionally graded materials using the combined finite–discrete element method

Computational Particle Mechanics volume 7, pages 903–917 (2020)Cite this article

Abstract

The functionally graded materials (FGMs), characterized by spatially varying material properties, have been used in a wide range of engineering applications (i.e., aerospace, nuclear reactor and microelectronics) in high temperature and high-temperature gradient environments. The prediction of crack behavior under severe temperature conditions is essential for the safety and long-term service life of such critical components. In this paper, a novel thermal–mechanical coupling model for FGMs is proposed, which consists of a thermal part for the temperature field computation and the combined finite–discrete element method part for the crack evolution modeling. The spatially dependent material characteristics of the FGMs are captured in this model, together with typical property variation functions (quadratic, exponential and trigonometric). The accuracy and robustness of the proposed coupled TM model are validated by numerical tests. Then, this model is applied to investigate the thermal cracking process in FGMs under different kinds of thermal loads. The influence of the crack interaction on crack growth pattern is also discussed. The results show that the proposed method is useful to the fracture mechanics analysis and design of the FGMs structures.

This is a preview of subscription content, access via your institution.

Access options

Buy single article

Instant access to the full article PDF.

USD 39.95

Price includes VAT (USA)
Tax calculation will be finalised during checkout.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
Fig. 14
Fig. 15
Fig. 16
Fig. 17
Fig. 18
Fig. 19

References

  1. Koizumi M (1997) FGM activities in Japan. Composites 28:1–4

    Google Scholar 

  2. Birman V (2007) Modeling and analysis of functionally graded materials and structures. Appl Mech Rev 60(5):42

    Google Scholar 

  3. Shukla A, Jain N, Chona R (2007) A review of dynamic fracture studies in functionally graded materials. Strain 43(2):76–95

    Google Scholar 

  4. Clémence Petit, Palmero P (2018) Functionally graded ceramics for biomedical application: concept, manufacturing, properties. Int J Appl Ceram Technol 15:820–840

    Google Scholar 

  5. Corni I, Ryan MP, Boccaccini AR (2008) Electrophoretic deposition: from traditional ceramics to nanotechnology. J Eur Ceram Soc 28(7):1353–1367

    Google Scholar 

  6. Babaei MH, Chen Z (2015) Transient hyperbolic heat conduction in a functionally graded hollow cylinder. J Thermophys Heat Transfer 24(2):325–330

    Google Scholar 

  7. Kim Jeong-Ho, Paulino G (2007) On fracture criteria for mixed-mode crack propagation in functionally graded materials. Mech Compos Mater Struct 14(4):227–244

    Google Scholar 

  8. Zamani A, Eslami MR (2009) Coupled dynamical thermoelasticity of a functionally graded cracked layer. J Therm Stresses 32(10):969–985

    Google Scholar 

  9. Wang ZW, Zhang Q, Xia LZ, Wu JT, Liu PQ (2015) Stress analysis and parameter optimization of an fgm pressure vessel subjected to thermo-mechanical loadings. Proc Eng 130:374–389

    Google Scholar 

  10. Noda N, Wang BL (2002) Transient thermoelastic responses of functionally graded materials containing collinear cracks. Eng Fract Mech 69(14–16):1791–1809

    Google Scholar 

  11. Guo LC, Noda NWuL (2008) Thermal fracture model for a functionally graded plate with a crack normal to the surfaces and arbitrary thermomechanical properties. Compos Sci Technol 68(3–4):1034–1041

    Google Scholar 

  12. Petrova V, Schmauder S (2012) Interaction of a system of cracks with an interface crack in functionally graded/homogeneous bimaterials under thermo-mechanical loading. Comput Mater Sci 64(64):229–233

    Google Scholar 

  13. Eshraghi I, Soltani N, Dag N (2018) Hyperbolic heat conduction based weight function method for thermal fracture of functionally graded hollow cylinders. Int J Press Vessels Pip 165:249–362

    Google Scholar 

  14. Kawasaki A, Watanabe R (2002) Thermal fracture behavior of metal/ceramic functionally graded materials. Eng Fract Mech 69(14–16):1713–1728

    Google Scholar 

  15. Abanto-Bueno J, Lambros J (2006) An experimental study of mixed mode crack initiation and growth in functionally graded materials. Exp Mech 46(2):179–196

    Google Scholar 

  16. Qin LY, Wang W, Yang G (2012) Experimental study on laser metal deposition of fgms with ultrasonic vibration. Appl Mech Mater 5:271–272

    Google Scholar 

  17. Gilbert A, Kokini K, Sankarasubramanian S (2008) Thermal fracture of zirconia-mullite composite thermal barrier coatings under thermal shock: an experimental study. Surf Coat Technol 10(202):2152–2161

    Google Scholar 

  18. Burlayenko VN, Altenbach H, Sadowski T, Dimitrova SD (2016) Computational simulations of thermal shock cracking by the virtual crack closure technique in a functionally graded plate. Comput Mater Sci 116:11–21

    Google Scholar 

  19. Shaghaghi MA, Marco A (2018) Thermoelastic analysis of surface cracks in fgms hollow cylinders using the interaction energy integral method. Eng Fract Mech 202:103–115

    Google Scholar 

  20. Ekhlakov A, Khay O, Zhang C, Sladek J, Sladek V, Gao XW (2012) Thermoelastic crack analysis in functionally graded materials and structures by a bem. Fatigue Fract Eng Mater Struct 35:724–776

    Google Scholar 

  21. Zhang BJ, Yang Y, Gao XW, Zhang C (2018) Dynamic fracture analysis of functionally graded materials under thermal shock loading by using the radial integration boundary element method. Compos Struct 201:468–476

    Google Scholar 

  22. Liu P, Yu T, Bui TQ, Zhang C, Xu Y, Lim CW (2014) Transient thermal shock fracture analysis of functionally graded piezoelectric materials by the extended finite element method. Int J Solids Struct 51(11–12):2167–2182

    Google Scholar 

  23. Rokhi MM, Shariati M (2013) Implementation of the extended finite element method for coupled dynamic thermoelastic fracture of a functionally graded cracked layer. J Braz Soc Mech Sci Eng 35(2):69–81

    MATH  Google Scholar 

  24. Zhang HH, Liu SM, Han SY, Fan LF (2018) Modeling of 2d cracked FGMs under thermo-mechanical loadings with the numerical manifold method. Int J Mech Sci 148:103–117

    Google Scholar 

  25. Munjiza A (2004) The combined finite–discrete element method. Wiley, Chichester

    MATH  Google Scholar 

  26. Lisjak A, Mahabadi O, He L, Tatone B, Kaifosh P et al (2018) Acceleration of a 2D/3D finite–discrete element code for geomechanical simulations using general purpose GPU computing. Comput Geotech 100:84–96

    Google Scholar 

  27. Lei Q, Latham JP, Xiang J (2016) Implementation of an empirical joint constitutive model into finite–discrete element analysis of the geomechanical behaviour of fractured rocks. Rock Mech Rock Eng 49(12):4799–4816

    Google Scholar 

  28. Yan CZ, Zheng H, Sun GH, Ge XR (2016) Combined finite–discrete element method for simulation of hydraulic fracturing. Rock Mech Rock Eng 49(4):1389–1410

    Google Scholar 

  29. Liu QS, Sun L (2019) Simulation of coupled hydro-mechanical interactions during grouting process in fractured media based on the combined finite–discrete element method. Tunn Undergr Space Technol 84:472–486

    Google Scholar 

  30. Munjiza A, Andrews KRF, White JK (1999) Combined single and smeared crack model in combined finite–discrete element analysis. Int J Numer Meth Eng 44(1):41–57

    MATH  Google Scholar 

  31. Munjiza A, Andrews KRF (1998) NBS contact detection algorithm for bodies of similar size. Int J Numer Meth Eng 43(1):131–149

    MATH  Google Scholar 

  32. Lisjak A, Grasselli G, Vietor T (2014) Continuum-discontinuum analysis of failure mechanisms around unsupported circular excavations in anisotropic clay shales. Int J Rock Mech Min Sci 65:96–115

    Google Scholar 

  33. Sutradhar A, Paulino GH (2004) The simple boundary element method for transient heat conduction in functionally graded materials. Comput Methods Appl Mech Eng 193(42–44):4511–4539

    MATH  Google Scholar 

  34. Cao LL, Qin QH, Zhao N (2012) Hybrid graded element model for transient heat conduction in functionally graded materials. Acta Mech Sin (English Series) 28(1):128–139

    MathSciNet  MATH  Google Scholar 

  35. Takeuti Y, Furukawa T (1981) Some considerations on thermal shock problems in a plate. J Appl Mech 48(1):113

    MATH  Google Scholar 

  36. Jiao YY, Zhang XL, Zhang HH, Li HB, Yang SQ, Li JC (2015) A coupled thermo-mechanical discontinuum model for simulating rock cracking induced by temperature stresses. Comput Geotech 67:142–149

    Google Scholar 

  37. Farouki OT (1981) The thermal properties of soils in cold regions. Cold Reg Sci Technol 5(1):67–75

    Google Scholar 

  38. Shen B, Stephansson O, Rinne M (2014) Modelling rock fracturing processes. Springer, Dordrecht

    Google Scholar 

  39. Tan X, Chen W, Wu G, Yang J (2013) Numerical simulations of heat transfer with ice–water phase change occurring in porous media and application to a cold-region tunnel. Tunn Undergr Space Technol 38:170–179

    Google Scholar 

  40. Yvonnet J, He QC, Zhu QZ, Shao JF (2011) A general and efficient computational procedure for modelling the kapitza thermal resistance based on xfem. Comput Mater Sci 50(4):1220–1224

    Google Scholar 

  41. Jung J, Do BC, Yang QD (2016) Augmented finite–element method for arbitrary cracking and crack interaction in solids under thermo-mechanical loadings. Philos Trans R Soc A Math Phys Eng Sci 374(2071):20150282

    Google Scholar 

  42. Hattiangadi A, Siegmund T (2005) A numerical study on interface crack growth under heat flux loading. Int J Solids Struct 42(24–25):6335–6355

    MATH  Google Scholar 

  43. He J, Liu QS, Wu ZJ, Xu XY (2018) Modelling transient heat conduction of granular materials by numerical manifold method. Eng Anal Bound Elem 86:45–55

    MathSciNet  MATH  Google Scholar 

  44. Itasca Consulting Group Inc (2005) Code UDEC. User’s Guide, Minnesota, USA

  45. Iesan D (2004) Thermoelastic models of continua. Kluwer Academic Publishers, Dordrecht

    MATH  Google Scholar 

  46. Carslaw HS, Jaeger JC (1959) Conduction of heat in solids, 2nd edn. Clarendon Press, Oxford, p 414

    Google Scholar 

  47. Sladek J, Sladek V, Zhang C (2003) Transient heat conduction analysis in functionally graded materials by the meshless local boundary integral equation method. Comput Mater Sci 28(3–4):494–504

    Google Scholar 

  48. Wang BL, Tian ZH (2005) Application of finite element–finite difference method to the determination of transient temperature field in functionally graded materials. Finite Elem Anal Des 41(4):335–349

    Google Scholar 

  49. Feng YT, Han K, Owen DRJ (2009) Discrete thermal element modelling of heat conduction in particle systems: pipe-network model and transient analysis. Powder Technol 193(3):248–256

    Google Scholar 

  50. Fujimoto T, Noda N (2001) Influence of the compositional profile of functionally graded material on the crack path under thermal shock. J Am Ceram Soc 84(7):1480–1486

    Google Scholar 

  51. Zamani A, Eslami MR (2010) Implementation of the extended finite element method for dynamic thermoelastic fracture initiation. Int J Solids Struct 47(10):1392–1404

    MATH  Google Scholar 

  52. Kawasaki A, Watanabe R (1997) Effect of gradient microstructure on thermal shock crack extension in metal/ceramic functionally graded materials. In: Proceedings of the 4th international symposium on functionally graded materials, pp 143–148

  53. Huang H, Meakin P, Malthe-Sorenssen A (2016) Physics-based simulation of multiple interacting crack growth in brittle rocks driven by thermal cooling. Int J Numer Anal Meth Geomech 40:2163–2177

    Google Scholar 

  54. Cheng F (2013) Analysis of fracture behavior of metal/ceramic functionally graded materials under thermal stress. Adv Mater Res 750–752:2200–2205

    Google Scholar 

  55. Bahr HA, Fischer G, Weiss HJ (1986) Thermal-shock crack patterns explained by single and multiple crack propagation. J Mater Sci 21(8):2716–2720

    Google Scholar 

  56. Bahr HA, Weiss Hans-Jürgen, Bahr U, Hofmann M, Fischer G, Lampenscherf S et al (2010) Scaling behavior of thermal shock crack patterns and tunneling cracks driven by cooling or drying. J Mech Phys Solids 58(9):1411–1421

    MathSciNet  Google Scholar 

Download references

Acknowledgements

This work was supported by the National Key Research and Development Program of China (Grant No. 2017YFC1501300), NSERC/Energi Simulation Industrial Research Chair program and Ph.D. Short-time Mobility Program of Wuhan University. The authors would like to thank Prof. Munjiza for the use of the Y code. The proposed Y-FGM™ is based on the Y code. The authors would also like to thank the anonymous reviewers for their constructive comments and suggestions.

Author information

Authors and Affiliations

  1. School of Civil Engineering, Wuhan University, Wuhan, 430072, China

    Lei Sun, Quansheng Liu & Xuhai Tang

  2. Department of Civil Engineering, University of Toronto, Toronto, ON, M5S 1A4, Canada

    Lei Sun & Giovanni Grasselli

Authors
  1. Lei Sun
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Giovanni Grasselli
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Quansheng Liu
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Xuhai Tang
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Lei Sun.

Ethics declarations

Conflict of interest

The authors declare that they have no conflict of interest.

Additional information

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Appendix A

Appendix A

Under the steady-state condition, the heat flux q is the same in the domain, and the temperature remains unchanged. Thus, the thermal gradient at coordinate x can be calculated as:

$$ J(x) = \frac{{q_{{}} }}{k(x)} $$
(25)

where k(x) = k0f(x), here f(x) is the thermal conductivity variation function.

Considering the temperature boundary condition on the left and right sides of the plate, we can have:

$$ T_{0} { + }\int_{0}^{l} {J(x)} dx = T_{l} $$
(26)

where Tl and T0 are temperature at x = l and x = 0, respectively.

Substituting the variation functions [Eqs. (4–6) into Eq. (24)], the exact solution for the constant heat flux and steady temperature field for different variation functions can be obtained, as illustrated in Table 3. Then, the effective heat conductivity (EHC) [49], defined as the amount of heat flux flow into unit area under unit temperature difference, can be calculated as:

$$ k_{eq} = \frac{q}{{T_{l} - T_{0} }} $$
(27)
Table 3 The heat flux and temperature distribution in steady stage
Full size table

Rights and permissions

Reprints and Permissions

About this article

Verify currency and authenticity via CrossMark

Cite this article

Sun, L., Grasselli, G., Liu, Q. et al. Thermal cracking simulation of functionally graded materials using the combined finite–discrete element method. Comp. Part. Mech. 7, 903–917 (2020). https://doi.org/10.1007/s40571-019-00290-9

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s40571-019-00290-9

Keywords

  • Functionally graded materials (FGMs)
  • Thermal–mechanical coupling problem
  • Thermal cracking
  • Crack interaction
  • Combined finite–discrete element method (FDEM)