Geetha M, Singh A K, Asokamani R, Gogia A K. Ti based biomaterials, the ultimate choice for orthopaedic implants—A review. Prog Mater Sci 54(3): 397–425 (2009)
Martin F, García C, Blanco Y. Influence of residual porosity on the dry and lubricated sliding wear of a powder metallurgy austenitic stainless steel. Wear 328–329: 1–7 (2015)
Liu X, Chu P, Ding C. Surface modification of titanium, titanium alloys, and related materials for biomedical applications. Mater Sci Eng: R: Rep 47(3–4): 49–121 (2004)
Huiskes R, Weinans H, van Rietbergen B. The relationship between stress shielding and bone resorption around total hip stems and the effects of flexible materials. Clin Orthop Relat Res (274): 124–134 (1992)
Segal V M. Equal channel angular extrusion: From macromechanics to structure formation. Mater Sci Eng: A 271(1–2): 322–333 (1999)
Shbeh M M, Goodall R. Open celled porous titanium. Adv Eng Mater 19(11): 1600664 (2017)
Zhao Z W, Zhang G, Li H G. Preparation of calcium phosphate coating on pure titanium substrate by electro-deposition method. J Central South Univ Technol 11(2): 147–151 (2004)
Thull R, Grant D. Physical and chemical vapor deposition and plasma assisted techniques for coating titanium. In Titanium in Medicine. Brunette D M, Tengvall P, Textor M, Thomsen P, Eds. Berlin: Springer, 2001: 283–341.
Matykina E, Skeldon P, Thompson G E. Fundamental and practical evaluations of PEO coatings of titanium. Int Heat Treat Surf Eng 3(1–2): 45–51 (2009)
Ceschini L, Lanzoni E, Martini C, Prandstraller D, Sambogna G. Comparison of dry sliding friction and wear of Ti6Al4V alloy treated by plasma electrolytic oxidation and PVD coating. Wear 264(1–2): 86–95 (2008)
Zhang X L, Jiang Z H, Yao Z P, Wu Z D. Electrochemical study of growth behaviour of plasma electrolytic oxidation coating on Ti6Al4V: Effects of the additive. Corros Sci 52(10): 3465–3473 (2010)
Martini C, Ceschini L, Tarterini F, Paillard J M, Curran J A. PEO layers obtained from mixed aluminate-phosphate baths on Ti-6Al-4V: Dry sliding behaviour and influence of a PTFE topcoat. Wear 269(11–12): 747–756 (2010)
Jin Z M, Dowson D. Bio-friction. Friction 1(2): 100–113 (2013)
Matykina E, Berkani A, Skeldon P, Thompson G E. Realtime imaging of coating growth during plasma electrolytic oxidation of titanium. Electrochimica Acta 53(4): 1987–1994 (2007)
Chen F, Zhou H, Chen C, Xia Y J. Study on the tribological performance of ceramic coatings on titanium alloy surfaces obtained through microarc oxidation. Prog Org Coat 64(2–3): 264–267 (2009)
Yerokhin A, Parfenov E V, Matthews A. In situ impedance spectroscopy of the plasma electrolytic oxidation process for deposition of Ca- and P-containing coatings on Ti. Surf Coat Technol 301: 54–62 (2016)
Shokouhfar M, Dehghanian C, Baradaran A. Preparation of ceramic coating on Ti substrate by plasma electrolytic oxidation in different electrolytes and evaluation of its corrosion resistance. Appl Surf Sci 257(7): 2617–2624 (2011)
Park M G, Choe H C. Corrosion behaviors of bioactive element coatings on PEO-treated Ti-6Al-4V alloys. Surf Coat Technol 376: 44–51 (2019)
Hussein R O, Nie X, Northwood D O. A spectroscopic and microstructural study of oxide coatings produced on a Ti-6Al-4V alloy by plasma electrolytic oxidation. Mater Chem Phys 134(1): 484–492 (2012)
Laurindo C A, Torres R D, Mali S A, Gilbert J L, Soares P. Incorporation of Ca and P on anodized titanium surface: Effect of high current density. Mater Sci Eng C Mater Biol Appl 37: 223–231 (2014)
Krupa D, Baszkiewicz J, Zdunek J, Smolik J, Słomka Z, Sobczak J W. Characterization of the surface layers formed on titanium by plasma electrolytic oxidation. Surf Coat Technol 205(6): 1743–1749 (2010)
Hwang I J, Choe H C, Brantley W A. Electrochemical characteristics of Ti-6Al-4V after plasma electrolytic oxidation in solutions containing Ca, P, and Zn ions. Surf Coat Technol 320: 458–466 (2017)
Reshadi F, Faraji G, Baniassadi M, Tajeddini M. Surface modification of severe plastically deformed ultrafine grained pure titanium by plasma electrolytic oxidation. Surf Coat Technol 316: 113–121 (2017)
Yao Z P, Jiang Y L, Jia F Z, Jiang Z H, Wang F P. Growth characteristics of plasma electrolytic oxidation ceramic coatings on Ti-6Al-4V alloy. Appl Surf Sci 254(13): 4084–4091 (2008)
Han I, Choi J H, Zhao B H, Baik H K, Lee I S. Micro-arc oxidation in various concentration of KOH and structural change by different cut off potential. Curr Appl Phys 7: e23–e27 (2007)
Philip J T, Mathew J, Kuriachen B. Tribology of Ti6Al4V: A review. Friction 7(6): 497–536 (2019)
Yu J M, Choe H C. Morphology changes and bone formation on PEO-treated Ti-6Al-4V alloy in electrolyte containing Ca, P, Sr, and Si ions. Appl Surf Sci 477: 121–130 (2019)
Shbeh M, Yerokhin A, Goodall R. Cyclic voltammetry study of PEO processing of porous Ti and resulting coatings. Appl Surf Sci 439: 801–814 (2018)
Menhal Shbeh M, Yerokhin A, Goodall R. Microporous titanium through metal injection moulding of coarse powder and surface modification by plasma oxidation. Appl Sci 7(1): 105 (2017)
Karaji Z G, Hedayati R, Pouran B, Apachitei I, Zadpoor A A. Effects of plasma electrolytic oxidation process on the mechanical properties of additively manufactured porous biomaterials. Mater Sci Eng: C 76: 406–416 (2017)
Toptan F, Alves A C, Pinto A M P, Ponthiaux P. Tribocorrosion behavior of bio-functionalized highly porous titanium. J Mech Behav Biomed Mater 69: 144–152 (2017)
Mabboux F, Ponsonnet L, Morrier JJ, Jaffrezic N, Barsotti O. Surface free energy and bacterial retention to saliva-coated dental implant materials: An in vitro study. Colloids Surf B Biointerfaces 39(4): 199–205 (2004)
Yerokhin A L, Nie X, Leyland A, Matthews A. Characterisation of oxide films produced by plasma electrolytic oxidation of a Ti-6Al-4V alloy. Surf Coat Technol 130(2–3): 195–206 (2000)
Alves S A, Bayón R, Igartua A, Saénz de Viteri V, Rocha L A. Tribocorrosion behaviour of anodic titanium oxide films produced by plasma electrolytic oxidation for dental implants. Lubr Sci 26(7–8): 500–513 (2014)
de Viteri V S, Bayón R, Igartua A, Barandika G, Moreno J E, Peremarch C P J, Pérez M M. Structure, tribocorrosion and biocide characterization of Ca, P and I containing TiO2 coatings developed by plasma electrolytic oxidation. Appl Surf Sci 367: 1–10 (2016)
US-ASTM. ASTM G99-05 Standard test method for wear testing with a pin-on-disk apparatus. ASTM, 2000.
Veiga C, Davim J P, Loureiro A J R. Properties and applications of titanium alloys: A brief review. Rev Adv Mater Sci 32: 14–24 (2012).
Rautray T R, Narayanan R, Kim K H. Ion implantation of titanium based biomaterials. Prog Mater Sci 56(8): 1137–1177 (2011)
Yetim A F. Investigation of wear behavior of titanium oxide films, produced by anodic oxidation, on commercially pure titanium in vacuum conditions. Surf Coat Technol 205(6): 1757–1763 (2010)
Suzuki K, Aoki K, Ohya K. Effects of surface roughness of titanium implants on bone remodeling activity of femur in rabbits. Bone 21(6): 507–514 (1997)
de Viteri V S, Fuentes E. Titanium and titanium alloys as biomaterials. In Tribology-Fundamentals and Advancements. Rijeka #, Ed. Croatia: IntechOpen, 2013: 155–181.
Zhou Y L, Niinomi M, Akahori T, Fukui H, Toda H. Corrosion resistance and biocompatibility of Ti-Ta alloys for biomedical applications. Mater Sci Eng: A 398(1–2): 28–36 (2005)
Myshkin N, Kovalev A. Adhesion and surface forces in polymer tribology—A review. Friction 6(2): 143–155 (2018)
Pałka K, Pokrowiecki R, Krzywicka M. Porous titanium materials and applications. Titanium for Consumer Applications. Amsterdam: Elsevier, 2019: 27–75.
Sasikumar Y, Karuppusamy I, Naillayan R. Surface modification methods for titanium and its alloys and their corrosion behavior in biological environment: A review. J Bio- and Tribo-Corrosion 5(36): 5–36 (2019)
Aziz-Kerrzo M, Conroy K G, Fenelon A M, Farrell S T, Breslin C B. Electrochemical studies on the stability and corrosion resistance of titanium-based implant materials. Biomaterials 22(12): 1531–1539 (2001)
Leitao E, Barbosa M A, De Groot K. In vitro testing of surface-modified biomaterials. J Mater Sci: Mater Med 9(9): 543–548 (1998)
Pałka K, Pokrowiecki R, Krzywicka M. Porous Titanium Materials and Applications. In Titanium for Consumer Applications. Froes F, Ed. Amsterdam: Elsevier, 2019: 27–75.
Vieira A C, Ribeiro A R, Rocha L A, Celis J P. Influence of pH and corrosion inhibitors on the tribocorrosion of titanium in artificial saliva. Wear 261(9): 994–1001 (2006)
Manhabosco T M, Tamborim S M, dos Santos C B, Müller I L. Tribological, electrochemical and tribo-electrochemical characterization of bare and nitrided Ti6Al4V in simulated body fluid solution. Corros Sci 53(5): 1786–1793 (2011)
Khanmohammadi H, Allahkaram S R, Muñoz A I, Encinas E R, Rashidfarokhi A R. Tribocorrosion behavior of plasma electrolytic oxidation coatings on a Ti6Al4V substrate. In Proceedings of Eurocorr 2016, Montpellier, France, 2016: 1–5.
Meng Y G, Xu J, Jin Z M, Prakash B, Hu Y Z. A review of recent advances in tribology. Friction 8(2): 221–300 (2020)
Ríos J M, Quintero D, Castaño J G, Echeverría F, Gómez M A. Comparison among the lubricated and unlubricated tribological behavior of coatings obtained by PEO on the Ti6Al4V alloy in alkaline solutions. Tribol Int 128: 1–8 (2018)
Laurindo C A H, Lepienski C M, Amorim F L, Torres R D, Soares P. Mechanical and tribological properties of Ca/P-doped titanium dioxide layer produced by plasma electrolytic oxidation: Effects of applied voltage and heat treatment. Tribol Trans 61(4): 733–741 (2018)
Kikuchi M, Takahashi M, Okuno O. Elastic moduli of cast Ti-Au, Ti-Ag, and Ti-Cu alloys. Dent Mater 22(7): 641–646 (2006)
Niinomi M, Akahori T, Takeuchi T, Katsura S, Fukui H, Toda H. Mechanical properties and cyto-toxicity of new beta type titanium alloy with low melting points for dental applications. Mater Sci Eng: C 25(3): 417–425 (2005)