Advertisement

Friction

, Volume 4, Issue 4, pp 303–312 | Cite as

Investigation of the mechanisms for stable superlubricity of poly(vinylphosphonic acid) (PVPA) coatings affected by lubricant

  • Caixia Zhang
  • Zhifeng Liu
  • Yuhong Liu
  • Qiang Cheng
  • Congbin Yang
  • Ligang Cai
Open Access
Research Article

Abstract

The stability of the tribological properties of polymer coatings is vital to ensure their long term use. The superlubricity of the poly(vinylphosphonic acid) (PVPA)-modified Ti6Al4V/polytetrafluoroethylene (PTFE) interface can be obtained when lubricated by phosphate-buffered saline (PBS, pH = 7.2), but not when lubricated by deionized water and ethanol. Therefore, the mechanisms for the superlubricity of PVPA coatings affected by lubricant were investigated in detail. The stability of the PVPA coatings and their compatibility with the lubricant are critical factors in realizing ideal tribological properties of PVPA coatings. Robust PVPA coatings are stable under a wide range of pH values (6–10) using PBS as the basic solution, and are also characterized by superlubricity. The hydrolysis kinetics of phosphate anhydride is the main reason for the pH responses. In addition, along with stability, PVPA coatings exhibit different friction coefficients in salt solutions which are composed of various ions, which indicates that the compatibility between PVPA coatings and the lubricant can be used to regulate the superlubricity properties. Based on a fundamental understanding of the mechanism of surperlubricity by considering the effects of the lubricant, PVPA coatings with stability and perfect tribological performance are expected to be applied in more aspects.

Keywords

superlubricity poly(vinylphosphonic acid) stability compatibility with lubricant 

Notes

Acknowledgements

We are grateful to Guoshun Pan, associate professor of Tsinghua University, for kindly providing the polishing solution of titanium for us. The authors also appreciate the funding supported by the Beijing Natural Science Foundation (No. 3164040) and the Tribology Science Fund of State Key Laboratory of Tribology (No. STLEKF15A01), as well as the National Natural Science Foundation of China (Nos. 51522504, 51575009, and 51575010).

References

  1. [1]
    Veruva S Y, Steinbeck M J, Toth J, Alexander D D, Kurtz S M.. Which design and biomaterial factors affect clinical wear performance of total disc replacements? A systematic review. Clin Orthop Relat Res 472: 3759–3769 (2014)CrossRefGoogle Scholar
  2. [2]
    Muir BVO, Myung D, Knoll W, Frank C W. Grafting of cross-linked hydrogel networks to titanium surfaces. ACS Appl Mater Interfaces 6: 958–966 (2014)CrossRefGoogle Scholar
  3. [3]
    Wang K, Xiong D S, Niu Y. Novel lubricated surface of titanium alloy based on porous structure and hydrophilic polymer brushes. Appl Surf Sci 317: 875–883 (2014)CrossRefGoogle Scholar
  4. [4]
    Wu H, Zhang X, He X, Li M, Huang X, Hang R, Tang B. Wear and corrosion resistance of anti-bacterial Ti-Cu-N coatings on titanium implants. Appl Surf Sci 317: 614–621 (2014)CrossRefGoogle Scholar
  5. [5]
    Luo Y, Chai W, Yang L, Tian M, Xu H, Chen W. The surface characterization of microporous titanium carbide coating on titanium alloys. Proc IMechE, Part J: J Eng Tribol 228: 521–528 (2014)CrossRefGoogle Scholar
  6. [6]
    Wang S, Liao Z, Liu Y, Liu W. Different tribological behaviors of titanium alloys modified by thermal oxidation and spraying diamond like carbon. Surf Coats Technol 252: 64–73 (2014)CrossRefGoogle Scholar
  7. [7]
    Seror J, Merkher Y, Kampf N, Collinson L, Day A J, Maroudas A, Klein J. Articular cartilage proteoglycans as boundary lubricants: structure and frictional interaction of surface-attached hyaluronan and hyaluronan-aggrecan complexes. Biomacromolecules 12: 3432–3443 (2011)CrossRefGoogle Scholar
  8. [8]
    Murakami T, Yarimitsu S, Nakashima K, Sawae Y, Sakai N. Influence of synovia constituents on tribological behaviors of articular cartilage. Friction 2: 150–162 (2013)CrossRefGoogle Scholar
  9. [9]
    Lee S, Zürcher S, Dorcier A, Luengo G S, Spencer N D. Adsorption and Lubricating properties of poly(L-lysine)-graft-poly(ethylene glycol) on human-hair surfaces. ACS Appl Mater Interfaces 1: 1938–1945 (2009)CrossRefGoogle Scholar
  10. [10]
    Bongaerts J H H, Cooper-White J J, Stokes J R. Low biofouling chitosan-hyaluronic acid multilayers with ultralow friction coefficients. Biomacromolecules 10: 1287–1294 (2009)CrossRefGoogle Scholar
  11. [11]
    Chen M, Briscoe W H, Armes S P, Klein J. Lubrication at physiological pressures by polyzwitterionic brushes. Science 323: 1698–1701 (2009)CrossRefGoogle Scholar
  12. [12]
    Kyomoto M, Moro T, Saiga K, Miyaji F, Kawaguchi H, Takatori Y, Nakamura K, Ishihara K. Lubricity and stability of poly(2-methacryloyloxyethyl phosphorylcholine) polymer layer on Co-Cr-Mo surface for hemi-arthroplasty to prevent degeneration of articular cartilage. Biomaterials 31: 658–668 (2010)CrossRefGoogle Scholar
  13. [13]
    Zhao Y, Tu Q, Wang J, Huang N. Crystalline TiO2 grafted with poly(2-methacryloyloxyethyl phosphorylcholine) via surface-initiated atom-transfer radical polymerization. Appl Surf Sci 257: 1596–1601 (2010)CrossRefGoogle Scholar
  14. [14]
    Ross R S, Pincus P. The polyelectrolyte brush–Poor solvent. Macromolecules 25: 2177–2183 (1992)CrossRefGoogle Scholar
  15. [15]
    Pryamitsyn V A, Leermakers F A M, Fleer G J, Zhulina E B. Theory of the collapse of the polyelectrolyte brush. Macromolecules 29: 8260–8270 (1996)CrossRefGoogle Scholar
  16. [16]
    Chen J, Hsieh C-Y, Huang C-F, Li P-M, Kuo S-W, Chang F-C. Using solvent immersion to fabricate variably patterned poly(methyl methacrylate) brushes on silicon surfaces. Macromolecules 41: 8729–8736 (2008)CrossRefGoogle Scholar
  17. [17]
    Limpoco F T, Advincula R C, Perry S S. Solvent dependent friction force response of polystyrene brushes prepared by surface initiated polymerization. Langmuir 23: 12196–12201 (2007)CrossRefGoogle Scholar
  18. [18]
    Thomas M, Gajda M, Naini C A, Franzka S, Ulbricht M, Hartmann N. Poly(N,N-dimethylaminoethyl methacrylate) brushes: pH-dependent switching kinetics of a surface-grafted thermoresponsive polyelectrolyte. Langmuir 31: 13426–13432 (2015)CrossRefGoogle Scholar
  19. [19]
    Willott J D, Humphreys B A, Murdoch T J, Edmondson S, Webber G B, Wanless E J. Hydrophobic effects within the dynamic pH-response of polybasic tertiary amine methacrylate brushes. Phys Chem Chem Phys 17: 3880–3890 (2015)CrossRefGoogle Scholar
  20. [20]
    Wei Q, Cai M, Zhou F, Liu W. Dramatically tuning friction using responsive polyelectrolyte brushes. Macromolecules 46: 9368–9379 (2013)CrossRefGoogle Scholar
  21. [21]
    Xu J G, Kato K. Formation of tribochemical layer of ceramics sliding in water and its role for low friction. Wear 245: 61–75 (2000)CrossRefGoogle Scholar
  22. [22]
    Li J J, Zhang C H, Luo J B. Superlubricity behavior with phosphoric acid-water network induced by rubbing. Langmuir 27: 9413–9417 (2011)CrossRefGoogle Scholar
  23. [23]
    Sun L, Zhang C H, Li J J, Liu Y H, Luo J B. Superlubricity of Si3N4 sliding against SiO2 under linear contact conditions in phosphoric acid solutions. Science China-Technological Sciences 56: 1678–1684 (2013)CrossRefGoogle Scholar
  24. [24]
    Sakata H, Kobayashi M, Otsuka H, Takahara A. Tribological properties of poly(methyl methacrylate) brushes prepared by surface-initiated atom transfer radical polymerization. Polymer J 37: 767–775 (2005)CrossRefGoogle Scholar
  25. [25]
    Kobayashi M, Terayama Y, Hosaka N, Kaido M, Suzuki A, Yamad N, Torikai N, Ishihara K, Takahara A. Friction behavior of high-density poly(2-methacryloyloxyethyl phosphorylcholine) brush in aqueous media. Soft Matter 3: 740–746 (2007)CrossRefGoogle Scholar
  26. [26]
    Kiritoshi Y, Ishihara K. Preparation of cross-linked biocompatible poly(2-methacryloyloxyethyl phosphorylcholine) gel and its strange swelling behavior in water/ethanol mixture. Journal of Biomaterials Science-Polymer Edition 13: 213–224 (2002)CrossRefGoogle Scholar
  27. [27]
    Zhang R, Ma S, Wei Q, Ye Q, Yu B, van der Gucht J, Zhou F. The weak interaction of surfactants with polymer brushes and its impact on lubricating behavior. Macromolecules 48: 6186–6196 (2015)CrossRefGoogle Scholar
  28. [28]
    Zhang C X, Liu Y, Wen S, Wang S. Poly(vinylphosphonic acid) (PVPA) on titanium alloy acting as effective cartilagelike superlubricity coatings. ACS Appl Mater Interfaces 6: 17571–17578 (2014)CrossRefGoogle Scholar
  29. [29]
    Gawalt E S, Avaltroni M J, Koch N, Schwartz J. Selfassembly and bonding of alkanephosphonic acids on the native oxide surface of titanium. Langmuir 17: 5736–5738 (2001)CrossRefGoogle Scholar
  30. [30]
    Petrovic Z, Katic J, Metikoš-Hukovic M, Dadafarin H, Omanovic S. Modification of a nitinol surface by phosphonate self-assembled monolayers. J Electrochem Soc 158: F159–F165 (2011)CrossRefGoogle Scholar
  31. [31]
    Lee Y J, Bingöl B, Murakhtina T, Sebastiani D, Meyer W H, Wegner G, Spiess H W. High-resolution solid-state NMR studies of poly(vinyl phosphonic acid) proton-conducting polymer: Molecular structure and proton dynamics. J Phys Chem B 111: 9711–9721 (2007)CrossRefGoogle Scholar
  32. [32]
    Kaltbeitzel A, Schauff S, Steininger H, Bingöl B, Brunklaus G, Meyer W H, Spiess H W. Water sorption of poly(vinylphosphonic acid) and its influence on proton conductivity. Solid State Ionics 178: 469–474 (2007)CrossRefGoogle Scholar
  33. [33]
    Jiang F, Kaltbeitzel A, Zhang J, Meyer W H. Nano-spheres stabilized poly(vinyl phosphonic acid) as proton conducting membranes for PEMFCs. International Journal of Hydrogen Energy 39: 11157–11164 (2014)CrossRefGoogle Scholar
  34. [34]
    Raviv U, Klein J. Fluidity of bound hydration layers. Science 297: 1540–1543 (2002)CrossRefGoogle Scholar

Copyright information

© The author(s) 2016

Open Access: The articles published in this journal are distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.

Authors and Affiliations

  • Caixia Zhang
    • 1
  • Zhifeng Liu
    • 1
  • Yuhong Liu
    • 2
  • Qiang Cheng
    • 1
  • Congbin Yang
    • 1
  • Ligang Cai
    • 1
  1. 1.Beijing Key Laboratory of Advanced Manufacturing TechnologyBeijing University of TechnologyBeijingChina
  2. 2.State Key Laboratory of TribologyTsinghua UniversityBeijingChina

Personalised recommendations