References
Svenungsson, J., Choquet, I., Kaplan, A.F.H.: Laser welding process – a review of keyhole welding modeling. Phys. Procedia. 78, 182–191 (2015)
Ai, Y., Wang, J., Jiang, P., Liu, Y., Liu, W.: Parameters optimization and objective trend analysis for fiber laser keyhole welding based on Taguchi – FEA. Int J Adv Manuf Technol. 90, 1419–1432 (2017)
Satyanarayana, G., Narayana, K.L., Nageswara Rao, B.: Numerical simulations on the laser spot welding of zirconium alloy endplate for nuclear fuel bundle assembly. Lasers in Manufacturing and Materials Processing. 5(1), 53–70 (2018)
Srinivasa Rao, B., Rudramoorthy, P., Srinivas, S., Nageswara Rao, B.: Effect of drilling induced damage on notched tensile strength and pin-bearing strength of woven GFR-epoxy composites. Mater. Sci. Eng. A. 472(1-2), 347–352 (2008)
Singaravelu, J., Jeyakumar, D., Nageswara Rao, B.: Taguchi’s approach for reliability and safety assessments in the stage separation process of a multistage launch vehicle. Reliab. Eng. Syst. Saf. 94(10), 1526–1541 (2009)
Parameshwaran Pillai, T., Lakshminarayanan, P.R., Nageswara Rao, B.: Taguchi’s approach to examine the effect of drilling induced damage on the notched tensile strength of woven GFR-epoxy composite. Adv. Compos. Mater. 20, 261–275 (2011)
Sahiti, M., Raghavendra Reddy, M., Budi, J., Peter Praveen, J., Nageswara Rao, B.: Optimum WEDM process parameters of Incoloy®Alloy800 using Taguchi method. International Journal of Industrial and Manufacturing Systems Engineering. 1(3), 64–68 (2016)
Bharathi, P., Priyanka, T.G.L., Srinivasa Rao, G., Nageswara Rao, B.: Optimum WEDM process parameters of SS304 using Taguchi method. International Journal of Industrial and Manufacturing Systems Engineering. 1(3), 69–72 (2016)
Rajeev Kumar, D., Varma, P.S.S.K., Nageswara Rao, B.: Optimum drilling parameters of coir fiber-reinforced polyester composites. American Journal of Mechanical and Industrial Engineering. 2(2), 92–97 (2017)
Konduri, S.S.S., Manideep Kumar Kalavala, V.D.S.R., Mandala, P., Manapragada, R.R., Nageswara Rao, B.: Application of Taguchi approach to seek optimum drilling parameters for woven fabric carbon fibre/epoxy laminates. MAYFEB. J. Mech. Eng. 1, 29–37 (2017)
Dutta, O.Y., Nageswara Rao, B.: Investigations on the performance of chevron type plate heat exchangers. Heat Mass Transf. 54(1), 227–239 (2018)
Ross, P.J.: Taguchi Techniques for Quality Engineering. McGraw-Hill, Singapore (1989)
Acknowledgements
The authors would like to thank the reviewers for their valuable suggestions to improve the clarity of presentation.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Satyanarayana, G., Narayana, K.L. & Nageswara Rao, B. Identification of Optimum Laser Beam Welding Process Parameters for E110 Zirconium Alloy Butt Joint Based on Taguchi-CFD Simulations. Lasers Manuf. Mater. Process. 5, 182–199 (2018). https://doi.org/10.1007/s40516-018-0061-7
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s40516-018-0061-7