Skip to main content
SpringerLink
Log in

Measurement and analysis technologies for magnetic pulse welding: established methods and new strategies

  • Published:
Advances in Manufacturing Aims and scope Submit manuscript

Abstract

Magnetic pulse welding (MPW) is a fast and clean joining technique that offers the possibility to weld dissimilar metals, e.g., aluminum and steel. The high-speed collision of the joining partners is used to generate strong atomic bonded areas. Critical brittle intermetallic phases can be avoided due to the absence of external heat. These features attract the notice of industries performing large scale productions of dissimilar metal joints, like automotive and plant engineering. The most important issue is to guarantee a proper weld quality. Numerical simulations are often used to predict the welding result a priori. Nevertheless, experiments and the measurement of process parameters are needed for the validation of these data. Sensors nearby the joining zone are exposed to high pressures and intense magnetic fields which hinder the evaluation of the electrical output signals. In this paper, existing analysis tools for process development and quality assurance in MPW are reviewed. New methods for the process monitoring and weld characterization during and after MPW are introduced, which help to overcome the mentioned drawbacks of established technologies. These methods are based on optical and mechanical measuring technologies taking advantage of the hypervelocity impact flash, the impact pressure and the deformation necessary for the weld formation.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Subscribe and save

Springer+ Basic
$34.99 /Month
  • Get 10 units per month
  • Download Article/Chapter or eBook
  • 1 Unit = 1 Article or 1 Chapter
  • Cancel anytime
Subscribe now

Buy Now

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
Fig. 14
Fig. 15
Fig. 16
Fig. 17
Fig. 18
Fig. 19
Fig. 20
Fig. 21
Fig. 22
Fig. 23
Fig. 24
Fig. 25
Fig. 26
Fig. 27
Fig. 28
Fig. 29

Similar content being viewed by others

References

  1. Lysenko D, Ermolaev V, Dudin A (1970) Methods of pressure welding. US 3520049

  2. Bellmann J, Lueg-Althoff J, Goebel G et al (2016) Effects of surface coatings on the joint formation during magnetic pulse welding in tube-to-cylinder configuration. In: Tekkaya AE, Kleiner M (eds) Proceedings of the 7th international conference on high speed forming, p 279–288

  3. Botros K, Groves T (1980) Fundamental impact welding parameters: an experimental investigation using a 76-mm powder cannon. J Appl Phys 51(7):3706–3714

    Article  Google Scholar 

  4. Groche P, Wagner M, Pabst C et al (2014) Development of a novel test rig to investigate the fundamentals of impact welding. J Mater Process Technol 214(10):2009–2017

    Article  Google Scholar 

  5. Cuq-Lelandais J, Ferreira S, Avrillaud G et al (2014) Magnetic pulse welding: welding windows and high velocity impact simulations. In: Huh H, Tekkaya AE (eds) Proceedings of the 6th international conference on high speed forming, p 199–206

  6. Geyer M, Rebensdorf A, Boehm S (2014) Influence of the boundary layer in magnetic pulse sheet welds of aluminium to steel. In: Huh H, Tekkaya AE (eds) Proceedings of the international conference on high speed forming, p 51–60

  7. Gafri O, Izhar A, Livshitz Y et al (2006) Magnetic pulse acceleration. In: Kleiner M (ed) Proceedings of the 2nd international conference on high speed forming, p 33–40

  8. Shribman V (2008) Magnetic pulse welding for dissimilar and similar materials. In: Kleiner M, Tekkaya AE (eds) Proceedings of the 3rd international conference on high speed forming, p 13–22

  9. Mori K, Bay N, Fratini L et al (2013) Joining by plastic deformation. CIRP Ann Manuf Technol 62(2):673–694

    Article  Google Scholar 

  10. Groche P, Wohletz S, Brenneis M et al (2014) Joining by forming: a review on joint mechanisms, applications and future trends. J Mater Process Technol 214(10):1972–1994

    Article  Google Scholar 

  11. Kapil A, Sharma A (2015) Magnetic pulse welding: an efficient and environmentally friendly multi-material joining technique. J Clean Prod 100:35–58

    Article  Google Scholar 

  12. Power Electronic Measurements Ltd. (2002) CWT current probe—application notes. http://pemuk.com/products/cwt-current-probe/cwt.aspx. Accessed 10 May 2016

  13. Dietz H, Lippmann H (1969) Messung der magnetischen Induktion in einer Magneform-Kompressionsspule. Elektrotech Z 90(3):51–54

    Google Scholar 

  14. Bauer D (1967) Ein neuartiges Messverfahren zur Bestimmung der Kraefte, Arbeiten, Formaenderungen, Formaenderungsgeschwindigkeiten und Formaenderungsfestigkeiten beim Aufweiten zylindrischer Werkstuecke durch schnellveraenderliche magnetische Felder, Dr.-Ing.-Dissertation, Technische Hochschule Hannover, Hannover

  15. Beerwald C (2004) Grundlagen der Prozessauslegung und -gestaltung bei der elektromagnetischen Umformung. Dissertation, Technische Universitaet Dortmund

  16. Veenaas S, Vollertsen F, Krueger M et al (2016) Determination of forming speed at a laser shock stretch drawing process. In: Tekkaya AE, Kleiner M (eds) Proceedings of the 7th international conference on high speed forming 2016, p 105–114

  17. Strand OT, Goosman DR, Martinez C et al (2006) Compact system for high-speed velocimetry using heterodyne techniques. Rev Sci Instrum 77:83108

    Article  Google Scholar 

  18. Barker LM, Hollenbach RE (1972) Laser interferometer for measuring high velocities of any reflecting surface. J Appl Phys 43(11):4669–4675

    Article  Google Scholar 

  19. Goosman DR (1996) The multibeam Fabry-Pérot velocimeter: efficient measurement of high velocities. Sci Technol Rev (7):12–19

  20. Zhang Y, L’Eplattenier P, Taber G et al (2008) Numerical simulation and experimental study for magnetic pulse welding process on AA6061-T6 and Cu101 sheet. In: The 10th international LS-DYNA users conference, Dearborn

  21. Jaeger A, Tekkaya AE (2012) Online measurement of the radial workpiece displacement in electromagnetic forming subsequent to hot aluminum extrusion. In: Tekkaya AE, Daehn GS, Kleiner M (eds) Proceedings of the 5th international conference on high speed forming 2012, p 13–22

  22. Winkler R (1973) Hochgeschwindigkeitsbearbeitung: Grundlagen und technische Anwendung elektrisch erzeugter Schockwellen und Impulsmagnetfelder. VEB Verlag Technik, Berlin

    Google Scholar 

  23. Watanabe M, Kumai S, Hagimoto G et al (2009) Interfacial microstructure of aluminium/metallic glass lap joints fabricated by magnetic pulse welding. Mater Trans 50(6):1279–1285

  24. Rebensdorf A, Boehm S (2016) Increase of the reproducibility of joints welded with magnetic pulse technology using graded surface topographies. In: Tekkaya AE, Kleiner M (eds) Proceedings of the 7th international conference on high speed forming, p 125–136

  25. Pabst C, Groche P (2014) Electromagnetic pulse welding: process insights by high speed imaging and numerical simulation. In: Huh H, Tekkaya AE (eds) Proceedings of the 6th international conference on high speed forming 2014, p 77–88

  26. Poynton WA, Travis FW, Johnson W (1968) The free radial expansion of thin cylindrical brass tubes using explosive gas mixtures. Int J Mech Sci 10:385–401

    Article  Google Scholar 

  27. Stern A, Becher O, Nahmany M et al (2015) Jet composition in magnetic pulse welding: Al-Al and Al-Mg couples. Weld J 94:257–284

    Google Scholar 

  28. Kakizaki S, Watanabe M, Kumaji S (2011) Simulation and experimental analysis of metal jet emission and weld interface morphology in impact welding. Mater Trans 52(5):1003–1008

    Article  Google Scholar 

  29. Bergmann OR (1984) The scientific basis of metal bonding with explosives. In: The 8th international ASME conference on high energy rate fabrication 1984, p 197–202

  30. Friichtenicht JF, Slattery JC (1963) Ionization associated with hypervelocity impact. In: Eichelberger RJ, Dittrich WH, Atkins WW (eds) Proceedings of the sixth symposium on hypervelocity impact, vol 2, p 591–612

  31. Eichhorn G (1976) Analysis of the hypervelocity impact process from impact flash measurements. Planet Space Sci 24(8):771–781

    Article  Google Scholar 

  32. Lueg-Althoff J, Schilling B, Bellmann J et al (2016) Influence of the wall thicknesses on the joint quality during magnetic pulse welding in tube-to-tube configuration. In: Tekkaya AE, Kleiner M (eds) Proceedings of the 7th international conference on high speed forming, p 259–268

  33. Pond RB, Mombley C, Glass CM (1963) Energy balances in hypervelocity penetration. In: Eichelberger RJ, Dittrich WH, Atkins WW (eds) Proceedings of the sixth symposium on hypervelocity impact, vol 2, p 401–419

  34. Hill R (1950) The mathematical theory of plasticity. Clarendon Press, Oxford

    MATH  Google Scholar 

  35. Lorenz A, Lueg-Althoff J, Bellmann J et al (2016) Workpiece positioning during magnetic pulse welding of aluminum-steel joints. Weld J 95(3):101–109

    Google Scholar 

  36. Sutton MA, Schreier HW, Orteu JJ (2009) Image correlation for shape, motion and deformation measurements: basic concepts, theory and applications. Springer, New York

    Google Scholar 

  37. Erlenmaier W, Kappes J, Tatarczyk A et al (2014) Efficient punching using integrated flattening. In: Liewald M (ed) Neuere Entwicklungen in der Blechumformung. Fellbach, p 81–97

  38. Hokari H, Sato T, Kawauchi K et al (1998) Magnetic impulse welding of aluminium tube and copper tube with various core materials. Weld Int 12(8):619–626

    Article  Google Scholar 

  39. DIN Deutsches Institut fuer Normung e.V. (2013) Welding and allied processes—classification of geometric imperfections in metallic materials—Part 2: welding with pressure (DIN EN ISO 6520)

  40. DIN Deutsches Institut fuer Normung e.V. (1982) Testing of sandwiches; climbing drum peel test (DIN 53295)

  41. DIN Deutsches Institut fuer Normung e.V. (1979) Testing of adhesives for metals and adhesively bonded metal joints; test specimens; manufacturing (DIN 53281)

  42. Broeckhove J, Willemsens L (2010) Experimental research on magnetic pulse welding of dissimilar metals. Master Thesis, Universitaet Gent

  43. Raoelison RN, Rachik M, Buiron N et al (2012) Assessment of gap and charging voltage influence on mechanical behaviour of joints obtained by magnetic pulse welding. In: Tekkaya AE, Daehn GS, Kleiner M (eds) Proceedings of the 5th international conference on high speed forming 2012, p 207–216

  44. Sharafiev S, Wagner MF, Pabst C et al (2016) Microstructural characterisation of interfaces in magnetic pulse welded aluminum/aluminum joints. In: Lampke T, Wagner G, Wagner M (eds) Tagungsband zum 18. Werkstofftechnischen Kolloqium, p 294–298

  45. Ben-Artzy A, Stern A, Frage N et al (2008) Interface phenomena in aluminium-magnesium magnetic pulse welding. Sci Technol Weld Join 13(4):402–408

    Article  Google Scholar 

  46. Ben-Artzy A, Stern A, Frage N et al (2010) Wave formation mechanism in magnetic pulse welding. Int J Impact Eng. doi:10.1016/j.ijimpeng.2009.07.008

  47. Raoelison RN, Sapanathan T, Buiron N et al (2015) Magnetic pulse welding of Al/Al and Al/Cu metal pairs: consequences of the dissimilar combination on the interfacial behavior during the welding process. J Manuf Process 20:112–127

    Article  Google Scholar 

  48. Goebel G, Kaspar J, Herrmannsdoerfer T et al (2010) Insights into intermetallic phases on pulse welded dissimilar metal joints. In: Babusci K, Daehn G, Marré M et al (eds) Proceedings of the 4th international conference on high speed forming 2010, p 127–136

  49. Tekkaya AE (2000) An improved relationship between Vickers hardness and yield stress for cold formed materials and its experimental verification. Ann CIRP 49(1):205–208

    Article  Google Scholar 

  50. Zhang Y, Babu S, Prothe C et al (2010) Application of high velocity impact welding at varied different length scales. J Mater Process Technol. doi:10.1016/j.jmatprotec.2010.01.001

    Google Scholar 

  51. Kore SD, Date PP, Kulkarni SV et al (2011) Application of electromagnetic impact technique for welding copper-to-stainless steel sheets. Int J Adv Manuf Technol 54:949–955

    Article  Google Scholar 

  52. Bmax (2016) Magnetic pulse welding—the ultimate solution for driveshaft manufacturers. Accessed 2 March 2016

  53. Hahn M, Weddeling C, Lueg-Althoff J et al (2016) Analytical approach for magnetic pulse welding of sheet connections. J Mater Process Technol 230:131–142

    Article  Google Scholar 

  54. DIN Deutsches Institut fuer Normung e.V. (1978) Testing of plated steels; determination of shearing strength between cladding material and base material in shearing test (DIN 50162)

  55. Barreiro P, Schulze V, Loehe D et al (2006) Strength of tubular joints made by electromagnetic compression at quasistatic and cyclic loading. In: Kleiner M (ed) Proceedings of the 2nd international conference: ICHSF 2006

  56. Fahrenwaldt HJ, Schuler V, Twrdek J (2014) Praxiswissen Schweißtechnik: Werkstoffe, Prozesse, Fertigung, 5th edn. Springer Vieweg, Wiesbaden

  57. Shaw RE (2002) Ultrasonic testing procedures, technician skills, and qualifications. J Mater Civ Eng 14(1):62–67

    Article  Google Scholar 

  58. Hellier C (2013) Handbook of nondestructive evaluation, 2nd edn. McGraw-Hill, New York

    Google Scholar 

  59. Santos TG, Sorger G, Vilaça P et al (2014) A non-conventional technique for evaluating welded joints based on the electrical conductivity. Key Eng Mater 611–612:671–676

    Article  Google Scholar 

Download references

Acknowledgements

This work is based on the results of Subproject A1 of the Priority Program 1640 (“joining by plastic deformation”); the authors would like to thank the Deutsche Forschungs gemeinschaft (DFG) for its financial support. Furthermore, the authors would like to thank “Bmax” (Toulouse, France) for preparing the samples for the torsion tests and “Telegaertner Geraetebau GmbH” (Hoeckendorf, Germany) for providing the fiberoptic components. Joerg Bellmann was supported by Deutsche Forschungsgemeinschaft through Grant No. BE 1875/30-2. Joern Lueg-Althoff was supported by Deutsche Forschungsgemeinschaft through Grant No. TE 508/39-2.

Author information

Authors and Affiliations

  1. Institute of Manufacturing Science and Engineering, TU Dresden, 01062, Dresden, Germany

    J. Bellmann & E. Beyer

  2. Fraunhofer Institute for Material and Beam Technology, Winterbergstrasse 28, 01277, Dresden, Germany

    J. Bellmann, S. Schulze & E. Beyer

  3. Institute of Forming Technology and Lightweight Construction, TU Dortmund, Baroper Strasse 303, 44227, Dortmund, Germany

    J. Lueg-Althoff, S. Gies & A. E. Tekkaya

Authors
  1. J. Bellmann
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. J. Lueg-Althoff
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. S. Schulze
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. S. Gies
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. E. Beyer
    View author publications

    You can also search for this author in PubMed Google Scholar

  6. A. E. Tekkaya
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to J. Bellmann.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Bellmann, J., Lueg-Althoff, J., Schulze, S. et al. Measurement and analysis technologies for magnetic pulse welding: established methods and new strategies. Adv. Manuf. 4, 322–339 (2016). https://doi.org/10.1007/s40436-016-0162-5

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s40436-016-0162-5

Keywords

Search

Navigation