Advertisement

Retrofitting of the IRB6-S2 robotic manipulator using Computer Numerical Control- based controllers

  • Alberto J. Alvares
  • Juan S. Toquica
  • Eduardo J. LimaII
  • Marcelo H. S. Bomfim
Technical Paper
  • 117 Downloads

Abstract

This work presents a comparative and descriptive study of numerical control machines solutions using Linux and Windows operating systems, used for the retrofitting of two similar models of old industrial robots, using controllers based on Computer Numerical Control (CNC). Federal University of Minas Gerais (UFMG) and University of Brasilia (UnB) adopted two different softwares, including the robot kinematics model and the generation of joint signal control. Furthermore, this article proposes a comparative study of the two open architecture controllers’ implementation advantages and CAD/CAM integration option, by describing and analyzing each academic solution and choosing the best alternative controller to implement the retrofitting technique for old industrial robots. The comparative study validated the developed generic robot retrofitting methodology, which can be considered as the work’s greatest contribution, as well as providing the open-source project, hardware and software, for ASEA IRB6-S2 Robot retrofitting. The proposed methodology is composed by a set of methods and activities described through an IDEF0 (Icam DEFinition for Function Modeling) model, which can be applied to the retrofitting of any industrial robot with serial or parallel kinematics, which guides the developer in five steps associated with the hardware and software specification for a desired robotic platform implementation as a custom solution based on LinuxCNC system.

Keywords

Retrofitting Open architecture CNC Industrial robot Kinematics model 

Notes

Acknowledgements

The authors would like to thank CNPq and FAP-DF for the promotion of research.

References

  1. 1.
    Abreu P (2002) Robtica industrial: Robotica industrial: Especificacao de robos e celulas robotizadas, vol 1. Universidade do Porto, pp 1–29Google Scholar
  2. 2.
    Asato O, Kato E, Inamasu R, Porto A (2002) Analysis of open cnc architecture for machine tools. J Braz Soc Mech Sci 24(3):208–212CrossRefGoogle Scholar
  3. 3.
    Barrientos A (2007) Fundamentos de Robotica, segunda edn. McGraw-Hill, MadridGoogle Scholar
  4. 4.
    Becerra VM, Cage CN, Harwin WS, Sharkey PM (2004) Hardware retrofit and computed torque control of a puma 560 robot updating an industrial manipulator. IEEE Control Syst 24(5):78–82CrossRefGoogle Scholar
  5. 5.
    Bishop BE, Spong MW (1999) Adaptive calibration and control of 2d monocular visual servo systems. Control Eng Pract 7(3):423–430CrossRefGoogle Scholar
  6. 6.
    Bomfim M, Fagner Coelho A, Lima E, Gontijo R (2014) A low cost methodology applied to remanufacturing of robotic manipulators. Congres Bras Autom 20:1506–1513Google Scholar
  7. 7.
    Bomfim M, Gontijo R, Bracarense AQ, Lima E (2012) Overhauling of a asea robot ir6 with open architecture. In: Trust, Security and Privacy in Computing and Communications (TrustCom), 2012 IEEE 11th International Conference on, pp 482–489 IEEEGoogle Scholar
  8. 8.
    Bomfim MHS (2013) Remanufatura de manipuladores robticos com arquitetura aberta. Master’s thesisGoogle Scholar
  9. 9.
    Bostick W (2013) Energy storage, compression, and switching. Springer, LondonGoogle Scholar
  10. 10.
    Cheruiyot GK, Zhu X, Cao Q (2016) Orocos-based generic control system for a 6 dof industrial manipulator. In: Advanced Robotics and its Social Impacts (ARSO), 2016 IEEE Workshop on, pp. 174–179. IEEEGoogle Scholar
  11. 11.
    Duysinx P, Geradin M (2004) An introduction to robotics: mechanical aspects, vol 1, Universite de LiegeGoogle Scholar
  12. 12.
    Ferenc G, Dimić Z, Lutovac M, Vidaković J, Kvrgić V (2013) Open architecture platforms for the control of robotic systems and a proposed reference architecture model. Trans FAMENA 37(1):89–100Google Scholar
  13. 13.
    Fujita S, Yoshida T (1996) Ose: open system environment for controller. In: 7th International Machine Tool Engineers Conference, pp 234–243Google Scholar
  14. 14.
    Fuwen H (2013) Loading and unloading manipulator controlled by built-in plc in cnc system. Sens Transducers 159(11):212Google Scholar
  15. 15.
    Glavonjic M, Milutinovic D, Zivanovic D, Dimic Z, Kvrgic V (2010) Desktop 3-axis parallel kinematic milling machine. Int J Adv Manuf Technol XLVI:51–60CrossRefGoogle Scholar
  16. 16.
    Han ZY, Wang YZ, Fu HY (2007) Development of a pc-based open architecture software-cnc system. Chin J Aeronaut 20(3):272–281CrossRefGoogle Scholar
  17. 17.
    Hascoet JY, Rauch M (2016) Enabling advanced cnc programming with opennc controllers for hsm machines tools. High Speed Mach 2(1):1–14Google Scholar
  18. 18.
    Horn C, Krüger J (2016) Feasibility of connecting machinery and robots to industrial control services in the cloud. In: Emerging Technologies and Factory Automation (ETFA), 2016 IEEE 21st International Conference on, pp 1–4Google Scholar
  19. 19.
    Horn C, Krüger J (2016) A retrofitting concept for integration of machinery with legacy interfaces into cloud manufacturing architectures. In: Control, Automation and Systems (ICCAS), 2016 16th International Conference on, pp 350–352Google Scholar
  20. 20.
    Hunt DV (1983) Industrial robotics handbook, 1st edn. Industrial Press Inc, New York,Google Scholar
  21. 21.
    IEEE (1995) IEEE Guide to the POSIX Open System Environment (OSE): sponsor portable applications standards committee of the IEEE Computer Society approved May 2, 1995, IEEE Standards Board. IEEEGoogle Scholar
  22. 22.
    Jokić DŽ, Lubura SD (2016) Comparative analysis of the controllers for puma 560 robot. IFAC-PapersOnLine 49(25):98–103MathSciNetCrossRefGoogle Scholar
  23. 23.
    Koren Y, Hu S, Gu P, Shpitalni M (2013) Open-architecture products. CIRP Ann Manuf Technol 62(2):719–729CrossRefGoogle Scholar
  24. 24.
    Lima E II et al (2004) Sensoring for retrofitting of an industrial robot. Inf Control Problems Manuf 1:545–550Google Scholar
  25. 25.
    LinuxCNC.org controls CNC machines (2015) LinuxCNC: Getting Started V2.5Google Scholar
  26. 26.
    LinuxCNC.org controls CNC machines (2015) LinuxCNC: HAL Manual V2.5Google Scholar
  27. 27.
    Lutz P, Sperling W, Fichtner D, Mackay R (1997) Osaca— the vendor neutral control architecture. In: Proc. European Conf. Integration in Manufacturing, pp 247–256Google Scholar
  28. 28.
    Nicolaides A (2007) Pure mathematics: Trigonometry. No. v. 2 in Success in Pure Mathematics. P.A.S.SGoogle Scholar
  29. 29.
    Oliveira LCPL (2013) Maquinagem de superfcies complexas com recurso a sistema robotico. Master’s thesis, Universidade do Porto, PortugalGoogle Scholar
  30. 30.
    Ortega JG, Garcia JG, Nieto LM, Garcia AS (2010) Description of an open software robotic platform for sensor fusion applications. In: Ehsan Shafiei S (ed) Advanced strategies for robot manipulators. Sciyo, p 428Google Scholar
  31. 31.
    Pashkevich AP, Dolgui AB, Semkin KI (2003) Kinematic aspects of a robot-positioner system in an arc welding application. Control Eng Pract 11(6):633–647CrossRefGoogle Scholar
  32. 32.
    Preez R (2014) 3d 6-dof serial armn robot—kinematics and implementation in linuxcnc. ASMGoogle Scholar
  33. 33.
    Ribeiro A, Almeida AGS, de Souza M.B, II EJL (2007) Metodologia para implementao de retroffiting de controladores de equipamentos industriais 8º CONGRESSO IBEROAMERICANO DE ENGENHARIA MECANICA, Cusco, pp 1–10Google Scholar
  34. 34.
    de Silva CW (1997) Intelligent control of robotic systems with application in industrial processes. Robot Auton Syst 21(3):221–237CrossRefGoogle Scholar
  35. 35.
    de Silva CW, Wu Q, Zhou Y (2003) Intelligent control experiments using a retrofitted industrial robot. ASME DYN SYST CONTROL DIV PUBL DSC, ASME, NEW YORK, NY,(USA) 48: 21–29Google Scholar
  36. 36.
    Szkodny T (1995) Forward and inverse kinematics of irb-6 manipulator. Mech Mach Theory 30(7):1039–1056CrossRefzbMATHGoogle Scholar
  37. 37.
    Toquica J (2016) Retrofitting do robô asea irb6-s2 baseado em tecnologias de comando numérico usando linuxcnc. Master’s thesis, Universidade de BrasiliaGoogle Scholar
  38. 38.
    Toquica JS, Alvares JA (2016) Implementacin de la tcnica retrofitting para el robot asea irb6-s2 usando linuxcnc. In: Congresso Nacional de Engenharia Mecnica-CONEM2016, p. 10Google Scholar
  39. 39.
    Yu D, Hu Y, Xu XW, Huang Y, Du S (2009) An open cnc system based on component technology. IEEE Trans Autom Sci Eng 6(2):302–310CrossRefGoogle Scholar

Copyright information

© The Brazilian Society of Mechanical Sciences and Engineering 2018

Authors and Affiliations

  • Alberto J. Alvares
    • 1
  • Juan S. Toquica
    • 1
  • Eduardo J. LimaII
    • 2
  • Marcelo H. S. Bomfim
    • 2
  1. 1.Mechanic and Mechatronic Engineering DepartmentUniversity of BrasiliaBrasíliaBrazil
  2. 2.Mechanical Engineering DepartmentFederal University of Minas GeraisBelo HorizonteBrazil

Personalised recommendations