Abstract
Thermo-mechanical shock wave in tube has many applications in aerospace/petroleum structures that brings up many challenges in repetitive, traveling, impulsive loading, and thermo-mechanical fatigue. The mechanical shock waves can cause oscillating strains in the tube wall, which can be several times higher than the equivalent static strains. The overall thermo-mechanical stresses after several loading–unloading processes in the engine may produce some discontinuities which may result in catastrophic fracture. In the current study, the resulting mechanical and thermal stresses have been assessed using numerical simulations. An axisymmetric finite element model of thermo-mechanical shock wave was developed using capabilities of commercial package ABAQUS for the preliminary analysis presented in this paper. Also, effects of different boundary condition types on tube wall response were investigated. The temperature field inside the engine was determined and presented in the form of a fixed value. In the numerical simulations, the mechanical and thermal displacements were computed separately and they are compared with available numerical and experimental results. Finally, the combined effects of mechanical and thermal stresses caused by thermo-mechanical shock wave have been simulated. The results of simulating coupled thermal stress showed that thermal shock caused by internal thermo-mechanical shock wave in tubes produces significant thermal stress.
Similar content being viewed by others
References
Tang S (1965) Dynamic response of a tube under moving pressure. Proc Am Soc Civil Eng Eng Mech Div 5:97–122
Reismann H (1965) Response of a pre-stressed cylindrical shell to moving pressure load. In: Ostrach S, Scanlon RH (eds) Eighth midwest mechanics conference. Pergamon Press, Oxford, pp 349–363
Beltman WM, Shepherd JE (2001) Linear elastic response of tubes to internal detonation loading. Int J Sound Vib 252(4):617–655
Mirzaei M, Malekan M, Sheibani E (2013) Failure analysis and finite element simulation of deformation and fracture of an exploded CNG fuel tank. Eng Fail Anal 30:91–98
Mirzaei M, Najafi M, Niasari H (2015) Experimental and numerical analysis of dynamic rupture of steel pipes under internal high-speed moving pressures. Int J Impact Eng 85:27–36
Malekan M (2014) Finite element simulation of gaseous detonation-driven fracture in thin aluminum tube using cohesive element. J Braz Soc Mech Sci Eng. doi:10.1007/s40430-014-0270-8
Sternberg E, Chakravorty JG (1959) Thermal shock in an elastic body with a spherical cavity. Q Appl Math 17:205–218
Tsui T, Kraus H (1965) Thermal stress wave propagation in hollow elastic spheres. J Acoust Soc Am 37:730–737
Zaker TA (1969) Dynamic thermal shock in a hollow sphere. Q Appl Math 26:503–520
Hata T (1991) Thermal shock in a hollow sphere caused by rapid uniform heating. J Appl Mech ASME 58:64–69
Wang X (1995) Thermal shock in a hollow cylinder caused by rapid arbitrary heating. J Sound Vib 183(5):899–906
Cinelli G (1965) An extension of the finite Hankel transform and applications. Int J Eng Sci 3:539–559
Kardomateas GA (1989) Transient thermal stresses in cylindrical orthotropic composite tubes. J Appl Mech ASME 56:411–417
Kardomateas GA (1990) The initial phase of transient thermal stresses due to general boundary thermal stresses due to general thermal loads in orthotropic hollow cylinders. J Appl Mech ASME 57:719–724
Hyer MW, Cooper DE (1986) Stresses and deformations in composite tubes due to a circumferential temperature gradient. J Appl Mech ASME 53:757–764
Yuan FG (1993) Thermal stresses in thick laminated composite shells. Compos Struct 26:63–75
Cho H, Kardomateas GA, Valle CS (1998) Elastodynamic solution for the thermal shock stresses in an orthotropic thick cylindrical shell. J Appl Mech ASME 65(1):184–193
Sumi N, Ito Y (1993) The propagation and reflection of thermal stress waves in anisotropic nonhomogeneous hollow cylinders and spheres. Nucl Eng Des 140:133–145
Lee Z-Y, Chen CK, Hung C-I (2001) Transient thermal stress analysis of multilayered hollow cylinder. Acta Mech 15:75–88
Segall AE (2003) Transient analysis of thick-walled piping under polynomial thermal loading. Nucl Eng Des 226:183–191
Wang HM, Ding HJ (2004) Transient thermoelastic solution of a multilayered orthotropic hollow cylinder for axisymmetric problems. J Therm Stresses 27:1169–1185
Shao ZS, Wang TJ, Ang K (2007) Transient thermomechanical analysis of functionally graded hollow circular cylinders. J Therm Stress 30(1):81–104
Radu V, Taylor N, Paffumi E (2008) Development of new analytical solutions for elastic thermal stress components in a hollow cylinder under sinusoidal transient thermal loading. Int J Press Vessels Pip 85:885–893
Ali AR, Ghosh NC, Alam TE (2010) Optimum design of pressure vessel subjected to autofrettage process. World Acad Sci Eng Technol 46:667–672
Atefi G, Mahmoudi H (2011) Thermal stresses in the wall of pipes caused by periodic change of temperature of medium fluid. The 4th international meeting of advances in thermofluids (AIP conference on proceedings) vol 1440, pp 72–89
Hosseini SM, Shahabian F (2011) Transient analysis of thermo-elastic waves in thick hollow cylinders using a stochastic hybrid numerical method, considering Gaussian mechanical properties. Appl Math Model 35:4697–4714
Zhang Q, Wang ZW, Tang CY, Hu DP, Liu PQ, Xia LZ (2012) Analytical solution of the thermo-mechanical stresses in a multilayered composite pressure vessel considering the influence of the closed ends. Int J Press Vessels Pip 98:102–110
Wang X, Gong YN (1992) An elasto-dynamic solution for multilayered cylinder. Int J Eng Sci 30(1):25–33
Wang X (1995) Thermal shock in a hollow cylinder caused by rapid arbitrary heating. J Sound Vib 183:788–895
Tanigawa Y (1995) Some basic thermo-elastic problems for nonhomogeneous structural materials. J Appl Mech 48(6):287–300
Cho H, Kardomateas GA (2001) Thermal shock stress due to heat convection at the bounding surface in a thick orthotropic cylindrical shell. Int J Solid Struct 38:2769–2788
Santos H, Mota Soares Cristóvão M, Mota Soares Carlos A, Reddy JN (2008) A semi-analytical finite element model for the analysis of cylindrical shells made of functionally graded materials under thermal shock. Compos Struct 86:10–21
Jabbari M, Sohrabpour S, Eslami MR (2002) Mechanical and thermal stresses in a functionally graded hollow cylinder due to radially symmetric loads. Int J Press Vessels Pip 79:493–497
Hosseini SM (2009) Coupled thermoelasticity and second sound in finite length functionally graded thick hollow cylinders (without energy dissipation). Mater Des 30:2011–2023
Ying J, Wang HM (2010) Axisymmetric thermoelastic analysis in a finite hollow cylinder due to nonuniform thermal shock. Int J Press Vessels Pip 87:714–720
Asemi K, Salehi M, Akhlaghi M (2014) Transient thermal stresses in functionally graded thick truncated cones by graded finite element method. Int J Press Vessels Pip 119:52–61
Zhou J, Deng Z, Liu T, Hou X (2009) Elastic structural response of prismatic metal sandwich tubes to internal moving pressure loading. Int J Solids Struct 46:2354–2371
Zhou J, Deng Z, Liu T, Hou X (2009) Optimal design of metallic sandwich tubes with prismatic cores to internal moving shock load. Struct Multidiscipl Optim 41:133–150
Zhou J, Deng Z, Xu D (2011) Dynamic response of prismatic metallic sandwich tubes under combined internal shock pressure and thermal load. Compos Struct 94:166–176
Zhang K, Deng Z, Ouyang H, Zhou J, Wang B (2014) Thermomechanical response of metallic sandwich tubes with prismatic cores considering active cooling. Arch Appl Mech 84:1145–1164
Kasahara J, Takazawa K, Arai T, Tanahashi Y, Chiba S, Matso A (2002) Experimental investigations of momentum and heat transfer in pulse detonation engines. Proc Combust Inst 29(2):2847–2854
Ghandikota RR (2008) Thermal analysis of pulse detonation engines, Master of Science thesis, University of Texas at Arlington
Kalidini N (2009) Heat transfer analysis of a pulse detonation engine, Master of Science thesis, University of Texas at Arlington
Nagarajana H, Lu FK (2009) Thermal analysis and heat exchanger design for pulse detonation engine. Int J Aerosp Innov 1(3):156–166
Zhou J, Deng Z, Hou X (2010) Transient thermal response in thick orthotropic hollow cylinders with finite length: high order shell theory. Acta Mechanica Solidica 23(2):156–166
Turns SR (2000) An introduction to combustion: concepts and application, 2nd edn. McGraw Hill, New York
The NASA computer program Chemical Equilibrium with Application (CEA code), http://www.grc.nasa.gov/WWW/CEAWeb/, 2011
ABAQUS User’s manual V6.12-1, Dassault Systems 2004–2012
Mirzaei M, Biglari H, Salavatian M (2006) Analytical and numerical modeling of the transient elasto-dynamic response of a cylindrical tube to internal gaseous detonation. Int J Press Vessels Pip 83:531–539
Mirzaei M (2008) On amplification of stress waves in cylindrical tubes under internal dynamic pressures. Int J Press Vessels Pip 50:1292–1303
Acknowledgments
The authors gratefully acknowledge the important support of the Brazilian research agencies CNPq (National Council for Scientific and Technological Developments—Grants 309005/2013-2, 486959/2013-9), CAPES (Coordination for the Improvement of Higher Education Personnel), and Tarbiat Modares University.
Author information
Authors and Affiliations
Corresponding author
Additional information
Technical Editor: Francis H. R. Franca.
Rights and permissions
About this article
Cite this article
Malekan, M., Barros, F.B. & Sheibani, E. Thermo-mechanical analysis of a cylindrical tube under internal shock loading using numerical solution. J Braz. Soc. Mech. Sci. Eng. 38, 2635–2649 (2016). https://doi.org/10.1007/s40430-015-0465-7
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s40430-015-0465-7