Abstract
Hearing aids are designed to overcome hearing losses suffered by some individuals and operated by measuring and amplifying the acoustic field at certain frequency depending on the user hearing loss. In many cases, its transducers (microphone and loudspeaker) are near located, and a feedback signal phenomenon may occur, either through structural or airborne transmission. The structural feedback is characterized by a vibrational response at the microphone position produced by the loudspeaker, also called receiver, that result in a unwanted signal due to the microphone vibration sensitivity. If not properly controlled, the feedback signal builds up, resulting in a loud whistle at the user ear causing great discomfort. The objective of this work is to analyse the structural feedback mechanism at a behind-the-ear hearing aid, and proposed a numerical approach that allows the consideration of the phenomena during the design phase of such systems. A numerical model, based on the finite element method (FEM) and the lumped parameters method, was used to analyse and quantify the problem. While the hearing aid case was modelled using FEM, the receiver and its suspensions were represented by means of a single degree-of-freedom or a multiple degree-of-freedom systems. The procedures used to define material properties and dynamic parameters are presented and discussed. Experimental tests are used to validate the models separately and to determine vibration levels imposed at the microphone location during the hearing aid operation, which are used to verify the overall accuracy of the numerical model. Finally, a sensitivity analysis is performed, indicating some design options that can be used to minimize the structural feedback problem in hearing aids.
Similar content being viewed by others
Abbreviations
- \(c\) :
-
Damping (Ns m\(^{-1})\)
- \(E\) :
-
Young’s modulus (Pa)
- \(f_n\) :
-
Natural frequency (Hz)
- \({\mathrm {FRF}}\) :
-
Frequency response function
- \(H(f)\) :
-
Receptance (m N\(^{-1})\)
- \(k\) :
-
Mechanical stiffness (N m\(^{-1})\)
- \(m\) :
-
Mass of receiver (kg)
- \(\eta\) :
-
Loss factor (dimensionless)
- \(\rho\) :
-
Density (kg m\(^{-3})\)
- \(n\) :
-
th modal vibration
References
Chung K (2004) Challenges and recent developments in hearing aids Part II. Feedback and occlusion effect reduction strategies, laser shell manufacturing processes, and other signal processing technologies. Trends Amplif 8:125–164
IBGE (2010) Instituto Brasileiro de Geografia e Estatfstica Brasflia, Censo Populacional 2010. http://www.ibge.gov.br Accessed on May 2011
Silman S, Iório MCM, Mizhahi MM, Parra VM (2004) Próteses auditivas: um estudo sobre seu benefício na qualidade de vida de indivíduos portadores de perda auditiva neurossensorial. Distúrbios da Comunicação 16(2):2176–2724
Chi HF, Gao SX, Soli SD, Alwan A (2003) Band-limited feedback cancellation with a modified filtered-x LMS algorithm for hearing aids. Speech Commun 39(1):147–161
Dillon H (2001) Hearing aids. Thieme, New York
Friis L, Ohlrich M, Jacobsen F, Jensen LB, Linkenkær MP (2008) An investigation of internal feedback in hearing aids. PhD thesis, Widex A/S
Graupe D, Grosspietsch J, Basseas SP (1998). Method of and means for adaptively filtering screeching noise caused by acoustic feedback. US Patent 4,783,818, 8 Nov 1988
Bustamante DK, Worrall TL, Williamson MJ (1989) Measurement and adaptive suppression of acoustic feedback in hearing aids. In: ICASSP-89, 1989 IEEE international conference on acoustics, speech, and signal processing, pp 2017–2020
Engebretson AM, O’Connell MP, Gong F (1990) An adaptive feedback equalization algorithm for the cid digital hearing aid. In: Proceedings of the twelfth annual international conference of the IEEE engineering in medicine and biology society, pp. 2286–2287
Dyrlund O, Bisgaard N (1991) Acoustic feedback margin improvements in hearing instruments using a prototype DFS (digital feedback suppression) system. Scand Audiol 20(1):49–53
Kates JM (1991) The problem of feedback in hearing aids. J Commun Disord 24(3):223–235
Joson HA, Asano F, Suzuki Y, Sone T et al (1993) Adaptive feedback cancellation with frequency compression for hearing aids. J Acoust Soc Am 94(6):3254
Maxwell JA, Zurek PM (1995) Reducing acoustic feedback in hearing aids. IEEE Trans Speech Audio Process 3(4):304–313
Nielsen JL, Svensson UP (1999) Performance of some linear time-varying systems in control of acoustic feedback. J Acoust Soc Am 106:240
Svensson PU (1995) Computer simulations of periodically time-varying filters for acoustic feedback control. J Audio Eng Soc 43(9):667–677
Killion MC, Wilson DL (1985) Response modifying earhooks for special fitting problems. Audecibel 34:28–30
Macrae J (1981) A new kind of earmold vent—the high cut cavity vent. Hear Instrum 32(10):18–64
MacRae J (1983) Vents for high-powered hearing aids. Hear J 13–16
Egolf DP, Haley BT, Howell HC, Legowski S, Larson VD (1989) Simulating the open-loop transfer function as a means for understanding acoustic feedback in hearing aids. J Acoust Soc Am 85:454
MC Killion (1974) Vibration sensitivity measurements on subminiature condenser microphones. In: Audio Engineering Society Convention 49. Audio Engineering Society
Friis L, Ohlrich M (2006) Two-dimensional model of the vibro-acoustic feedback in a hearing aid. In: ICSV13, Vienna, Austria
ASTM E 756 (2005) Standard test method for measuring vibration-damping properties of materials
Ansys CFX (2011) ANSYS User Manual Release 12:1
Barbosa LR, Jordan R, Cordioli JA (2012) Structural dynamic analysis of a BTE hearing aid case. In: 7th national congress of mechanic engineering—CONEM 2012, Sao Luis, Brasil
Cook RD et al (2007) Concepts and applications of finite element analysis. Wiley, Hoboken
Barbosa LR (2012) Analise do problema de realimentacao estrutural de um aparelho auditivo. Master’s thesis, Universidade Federal de Santa Catarina
Ewins DJ (1984) Modal testing: theory and practice. Research studies press, Letchworth
Jordan R (2002) Modal experimental analysis. Federal University of Santa Catarina, Post Graduate of Mechanic Engineering
LMS Test (2010) Lab 10B User Manual
Meirovitch L (2001) Fundamentals of vibrations. McGraw-Hill International Edition, New York
Acknowledgments
Thanks are due to CAPES and Acústica Amplivox SA for their financial support for the main author’s master project; to professor Alberto Serpa of UNICAMP for partnership among UFSC/UNICAMP, which provided scholarships for post-graduate students.
Author information
Authors and Affiliations
Corresponding author
Additional information
Technical Editor: Marcos Pinotti.
Rights and permissions
About this article
Cite this article
Barbosa, L.R., Jordan, R. & Cordioli, J.A. Structural feedback analysis of a hearing aid using finite element and lumped parameters methods. J Braz. Soc. Mech. Sci. Eng. 38, 1059–1071 (2016). https://doi.org/10.1007/s40430-015-0373-x
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s40430-015-0373-x