Skip to main content

Influence of intake pipe length and diameter on the performance of a spark ignition engine

Abstract

This work shows the influence of intake pipe length and diameter on the performance of a spark ignition engine. A production four-stroke, four-cylinder, eight-valve, 1.0-l engine was tested in a bench dynamometer, fuelled by a blend of 78 % gasoline and 22 % ethanol. Experiments were carried out in the engine speed range from 1,500 to 6,500 rev/min. Three intake pipe lengths—0.3, 0.6 and 0.9 m—and three intake pipe diameters—0.044, 0.053 and 0.067 m—were investigated. The effects of intake pipe geometry on intake air mass flow rate and volumetric efficiency and the impacts on engine performance parameters—torque, power, thermal efficiency and specific fuel consumption—were evaluated. The results revealed that, for low engine speeds, the intake pipe with longer length and smaller diameter produced the best performance. On the other hand, the intake pipe with shorter length and larger diameter delivered the best engine performance at high speeds.

This is a preview of subscription content, access via your institution.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8

Abbreviations

D :

Diameter (m)

L :

Length (m)

SFC:

Specific fuel consumption (kg/kW h)

References

  1. 1.

    Benajes J, Reyes E, Galindo J, Pedro J (1997) Predesign model for intake manifolds in internal combustion engines. SAE Paper 970055

  2. 2.

    Benson RS (1986) The thermodynamics and gas dynamics of internal combustion engines, vol 2. Oxford University Press, New York

    Google Scholar 

  3. 3.

    Ceviz MA, Akin M (2010) Design of a new si engine intake manifold with variable length plenum. Energy Convers Manag 51:2239–2244

    Article  Google Scholar 

  4. 4.

    Galindo J, Luján JM, Serrano JR, Dolz V, Guilain S (2004) Design of an exhaust manifold to improve transient performance of a high-speed turbocharged diesel engine. Exp Thermal Fluid Sci 28:863–875

    Article  Google Scholar 

  5. 5.

    Giacosa TD (1986) Endothermal engines, 2nd edn. Ulrico Hoelpi, Milan

    Google Scholar 

  6. 6.

    Heisler H (1995) Advanced engine technology. Hodder Headline Group, USA

    Google Scholar 

  7. 7.

    Kline SI, McClintock FA (1953) Describing uncertainties in single sample experiments. Mech Eng 75:3–8

    Google Scholar 

  8. 8.

    Nowakowski J, Sobieszczanski M (1999) Inlet system choice of spark ignition engine based on numerical analysis of filling a cylinder. SAE Paper 1999-01-0217

  9. 9.

    Olczyk A (2009) Investigation of the specific mass flow rate distribution in pipes supplied with a pulsating flow. Int J Heat Fluid Flow 30:637–646

    Article  Google Scholar 

  10. 10.

    Pogorevc P, Kegl B (2006) Intake system design procedure for engines with special requirements. Proceedings of IMechE Part D. J Automob Eng 220:241–252

    Google Scholar 

  11. 11.

    Sekavčnik M, Ogorevc T, Škerget L (2006) CFD analysis of the dynamic behaviour of a pipe system. Forsch Ingenieurwes 70:139–144

    Article  Google Scholar 

  12. 12.

    Shannak B, Damseh R, Alhusein M (2006) Influence of air intake pipe on engine exhaust emission. Forsch Ingenieurwes 70:128–132

    Article  Google Scholar 

  13. 13.

    Tong GCK, Sparrow EM, Abraham JP (2009) Geometric strategies for attainment of identical outflows through all the exit ports of a distribution manifold in a manifold system. Appl Therm Eng 29:3552–3560

    Article  Google Scholar 

Download references

Acknowledgments

The authors thank FIAT Automobiles, FAPEMIG, CNPq and CAPES for the financial support to this project.

Author information

Affiliations

Authors

Corresponding author

Correspondence to José Ricardo Sodré.

Additional information

Technical Editor: Demetrio Neto.

Rights and permissions

Reprints and Permissions

About this article

Cite this article

Costa, R.C., Hanriot, S.M. & Sodré, J.R. Influence of intake pipe length and diameter on the performance of a spark ignition engine. J Braz. Soc. Mech. Sci. Eng. 36, 29–35 (2014). https://doi.org/10.1007/s40430-013-0074-2

Download citation

Keywords

  • Internal combustion engine
  • Intake system
  • Performance
  • Volumetric efficiency
  • Fuel consumption