Skip to main content

Next Generation Functional Surfaces for Large Bore Piston Rings

This is a preview of subscription content, access via your institution.

Figure 1
Figure 2
Figure 3
Figure 4
Figure 5
Figure 6

References

  1. Cantow, F.G.: Piston Rings for Large Bore Engines. 24th CIMAC World Congress on Combustion Engine Technology for Ship Propulsion, Power Generation, Rail Traction, Kyoto, Japan, 2004

    Google Scholar 

  2. Christensen, O.: Cylinder lubrication of two-stroke crosshead marine diesel engines. In: Wärtsilä Technical Journal 2010, No. 2, pp. 39–48

    Google Scholar 

  3. McGeary, T.; Chew, F.; Fogh, J.W.: Investigations into abrasive and corrosive wear mechanisms of pistons and liners in large bore 2-stroke diesel engine cylinders. 24th CIMAC World Congress on Combustion Engine Technology for Ship Propulsion, Power Generation, Rail Traction, Kyoto, Japan, 2004

    Google Scholar 

  4. International Convention for the Prevention of Pollution from Ships, MARPOL 73/78, Annex VI. MEPC, IMO, London, 2008

    Google Scholar 

  5. Lausmann, G.A.; Unruh, J.N.M.: Die galvanische Verchromung. 2nd ed. Saulgau: Leuze, 2006

    Google Scholar 

  6. Esser, J.; Linde, R.; Münchow, F.: Diamond-Reinforced Running Surface for Combustion Rings. In: MTZworldwide 65 (2004), No. 7–8, pp. 27–28

    Google Scholar 

  7. Hoppe, S.; Mittler, R.; Dörnenburg, F.T.H.; Meske, R.: Contribution of Advanced Piston and Ring Design and Coatings on Friction Reduction in Future Diesel Engines. 22nd Aachen Colloquium Automobile and Engine Technology, 2013

    Google Scholar 

  8. Katsich, C.; Badisch, E.: Effect of carbide degradation in a Ni-based hardfacing under abrasive and combined impact/abrasive conditions. In: Surface and Coatings Technology 206 (2011), pp. 1062–1068

    Article  Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Rights and permissions

Reprints and Permissions

About this article

Verify currency and authenticity via CrossMark

Cite this article

Aumiller, M., Buchmann, M., Schmidt, P. et al. Next Generation Functional Surfaces for Large Bore Piston Rings. MTZ ind 8, 32–37 (2018). https://doi.org/10.1007/s40353-018-0013-x

Download citation

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s40353-018-0013-x

Keywords

  • Piston Rings
  • Functional Surface Generation
  • Laser Deposition Welding
  • Laser Remelting
  • Material Gray Cast Iron