Abstract
For the evaluation of cavitation erosion resistance of metallic materials, it has always been a time-consuming technical problem. This paper innovatively proposed a parameter named cavitation hardening rate to characterize the plastic deformation and work hardening behavior of metallic materials during the cavitation process and then found a positive correlation between cavitation hardening rate and strain hardening index. Finally, the relationship between cavitation volume loss and strain hardening index was obtained, and a simple and rapid evaluation method for cavitation erosion resistance was established.
References
Z. Wang, B. Zhang, Wear 482–483, 203986 (2021)
G. Taillon, F. Pougoum, S. Lavigne, L. Ton-That, R. Schulz, E. Bousser, S. Savoie, L. Martinu, J.E. Klemberg-Sapieha, Wear 364–365, 201 (2016)
Y. Tian, H. Zhao, R. Yang, X. Liu, H. Li, X. Chen, Wear 498–499, 204344 (2022)
M.C. Romero, A.P. Tschiptschin, C. Scandian, Wear 426–427, 518 (2019)
S. Hattori, B.H. Sun, F.G. Hammitt, T. Okada, Wear 103, 119 (1985)
S. Hattori, E. Nakao, Wear 249, 839 (2001)
M. Nowakowska, L. Łatka, P. Sokołowski, M. Szala, F.L. Toma, M. Walczak, Wear 508–509, 204462 (2022)
L.A. Espitia, H. Dong, X.Y. Li, C.E. Pinedo, A.P. Tschiptschin, Wear 332–333, 1070 (2015)
J. Mondal, K. Das, S. Das, Wear 504–505, 204422 (2022)
K. Peng, C. Kang, G. Li, K. Matsuda, H. Soyama, Mater. Corros. 69, 536 (2018)
A. Krella, Surf. Coat. Technol. 204, 263 (2009)
I. Mitelea, I. Bordeaşu, M. Pelle, C. Crăciunescu, Ultrason. Sonochem. 23, 385 (2015)
Y. Hong, Y. Zheng, Z. Yao, J. Mater. Sci. Technol. 25, 758 (2009)
D.G. Li, D.R. Chen, P. Liang, Ultrason. Sonochem. 35, 375 (2017)
Y. Li, Y. Lian, Y. Sun, Met. Mater. Int. 27, 5082 (2021)
L. Li, Y. Qiao, L. Zhang, C. Li, Z. Liu, R. Ma, L. Yang, J. Li, Y. Zheng, Ultrason. Sonochem. 98, 106498 (2023)
Q.N. Song, N. Xu, Y.F. Bao, Y.F. Jiang, W. Gu, Y.G. Zheng, Y.X. Qiao, Acta Metall. Sin. -Engl. Lett. 30, 712 (2017)
Z.P. Shi, Z.B. Wang, J.Q. Wang, Y.X. Qiao, H.N. Chen, T.Y. Xiong, Y.G. Zheng, Acta Metall. Sin. -Engl. Lett. 33, 415 (2019)
Z. Liu, S. Zhu, M. Shen, Y. Jia, W. Wang, F. Wang, J. Mater. Sci. Technol. 54, 211 (2020)
L. Li, Y. Qiao, L. Zhang, A. Ma, E.F. Daniel, R. Ma, J. Chen, Y. Zheng, Int. J. Miner. Metall. Mater. 30, 1338 (2023)
L.M. Zhang, A.L. Ma, H. Yu, A.J. Umoh, Y.G. Zheng, Tribol. Int. 136, 250 (2019)
K. Selvam, P. Mandal, H.S. Grewal, H.S. Arora, Ultrason. Sonochem. 44, 331 (2018)
G. Gao, Z. Zhang, Wear 488–489, 204137 (2022)
P. Lu, Z. Xu, Y. Tian, R. Yang, K. Hu, H. Li, Y. Yin, X. Chen, Materials 16, 1392 (2023)
R.L. Howard, A. Ball, Acta Mater. 44, 3157 (1996)
ASTM, G32–16: Standard test method for cavitation erosion using vibratory apparatus, Annual book of ASTM standards, ASTM, West Conshohocken, PA, (2016).
M.J. Hytch, E. Snoeck, R. Kilaas, Ultramicroscopy 74, 131 (1998)
ASTM, E8M-16: Standard test methods for tension testing of metallic materials, Annual book of ASTM standards, ASTM, West Conshohocken, PA, (2016).
X. Wang, H. Li, W. Zhang, Z. Liu, G. Wang, Z. Luo, F. Zhang, Metall. Mater. Trans. A 47, 4659 (2016)
Z. He, B. Chen, B. Zhou, F. Liu, Q. Hu, Z. Qin, Z. Gao, W. Hu, Z. Wu, Corros. Sci. 211, 110886 (2023)
G. Mahalle, O. Salunke, N. Kotkunde, A.K. Gupta, S.K. Singh, J. Mater. Res. Technol. 8, 2130 (2019)
N.S. Mishra, S. Mishra, V. Ramaswamy, Metall. Trans. A 20, 2819 (1989)
X.R. Zuo, Y.B. Chen, M.H. Wang, Mater. Res.-Ibero-am. J. Mater. 15, 915 (2012)
I.M. Hutchings, Tribology: Friction and Wear of Engineering Materials (Butterworth Heinemann, London, 1992)
R.C. Barik, J.A. Wharton, R.J.K. Wood, K.R. Stokes, Wear 267, 1900 (2009)
Acknowledgements
This research was funded by the National Key Research and Development Program of China (2022YFB3705803), the National Natural Science Foundation of China (No. 52031007), the Natural Science Foundation of Tianjin (22JCQNJC00950) and the Scientific and Technological Project of Yunnan Precious Metals Laboratory (YPML-2023050275).
Author information
Authors and Affiliations
Corresponding authors
Ethics declarations
Conflict of interest
The authors state that there are no conflict of interest to disclose.
Additional information
Available online at http://link.springer.com/journal/40195.
Supplementary Information
Below is the link to the electronic supplementary material.
Rights and permissions
About this article
Cite this article
Li, Y., Qin, Z., Du, X. et al. A Novel Approach for Rapid Evaluating Cavitation Erosion Resistance of Metallic Materials. Acta Metall. Sin. (Engl. Lett.) (2024). https://doi.org/10.1007/s40195-024-01710-3
Received:
Revised:
Accepted:
Published:
DOI: https://doi.org/10.1007/s40195-024-01710-3