Skip to main content
SpringerLink
Log in

Effect of niobium on the microstructure and properties of submerged arc welds in HSLA steel

  • Research Paper
  • Published:
Welding in the World Aims and scope Submit manuscript

Abstract

High-strength low-alloy or microalloyed steels are thermo-mechanically control processed (TMCP) to achieve desired microstructures and mechanical properties, and microalloy additions are critical for obtaining optimum properties. The steel of interest in this study is microalloyed with approximately 0.1 wt% Nb, levels that are typical in pipeline steels such as X70. Submerged arc welding (SAW) is a commonly utilized manufacturing method for constructing pipe segments via seam welding. There were two parts to this investigation. Part 1 analyzed controlled dilution levels consisting of commercially available SAW electrodes and Nb-bearing steel in proportions to simulate submerged arc weld metal. Part 2 of this investigation evaluated actual submerged arc welds on low-alloy steels. Bead-on-plate welds were deposited, and the Nb content of the weld metal was systematically increased by adding ferro-niobium directly to the flux. Two-run welds representative of line pipe production were also evaluated using the same ferro-niobium flux additions in order to increase the weld metal Nb content. The microstructural evolution and corresponding mechanical properties with increased Nb are evaluated based on this work and on the published literature.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
Fig. 14
Fig. 15
Fig. 16
Fig. 17
Fig. 18
Fig. 19
Fig. 20
Fig. 21
Fig. 22
Fig. 23
Fig. 24
Fig. 25

Similar content being viewed by others

References

  1. API 5L (2012) Specification for Line Pipe

  2. Hulka K, Heisterkamp F (1983) Physical metallurgy, properties and weldability of pipe line steels with various niobium contents, in HSLA Steels Technology and Applications, p 915–924

  3. Takahashi N, Ito M, Watanabe I, Hirano O, Hirabayashi K (1977) Developments for seam welding of high test line pipe, in Welding of Line Pipe Steels, p 36–55

  4. Garland JG, Kirkwood PR (1974) The notch toughness of submerged arc weld metal in micro-alloyed structural steels, Sheffield

  5. Baumann SF, Sawhill JM, Nakabayashi JM (1977) Wire and flux development for seam welding of HSLA line pipe, in Welding of line pipe steels

  6. Sawhill JM (1977) Welding HSLA line pipe steels, no. 7, p 56–60

    Article  Google Scholar 

  7. Garland JG, Kirkwood PR (1977) Metallurgical factors controlling weld metal toughness in the seam welding of line pipe, in Welding of Line Pipe Steel, p 176–227

  8. Bhadeshia HKDH (2001) Bainite in Steels, 2nd edn. IOM Communications Ltd, Cambridge

    Google Scholar 

  9. Thewlis G (1989) Pipeline welds - effects of pipeline and consumables composition. 1Experimental investigation. Join Mater 2(1):25–32

    CAS  Google Scholar 

  10. G. Thewlis, Pipeline welds - effects of pipeline and consumables composition. 2-Discussion and conclusions, Join. Mater., vol. 2, no. 3, pp. 125–129, 1989

  11. Thewlis G (2013) Classification and quantification of microstructures in steels. Mater Sci Technol 20(2):143–160

    Article  Google Scholar 

  12. Babu SS, Bhadeshia HKDH (1990) Transition from bainite to acicular ferrite in reheated Fe–Cr–C weld deposits. Mater Sci Technol 6:1005–1020

    Article  CAS  Google Scholar 

  13. Bhadeshia HKDH, Honeycombe SR (2006) Steels Microstructure and Properties, third. Elsevier Ltd., Oxford

    Google Scholar 

  14. Kirkwood PR (1981) Welding of niobium containing microalloyed steels, in Niobium Proceedings of the International Symposium, pp 761–802

  15. Bhole SD, Nemade JB, Collins L, Liu C (2006) Effect of nickel and molybdenum additions on weld metal toughness in a submerged arc welded HSLA line-pipe steel. J Mater Process Technol 173(1):92–100

    Article  CAS  Google Scholar 

  16. M. Liebeherr, N. Sanchez, N. Ilic, O. E. Gungor, and H. Luccioni, Recommendations for submerged arc spiral welding with optimized CTOD properties, in Proceedings of the 2018 12th International Pipeline Conference, 2018, vol. 29, no. 614, pp. 481–489

  17. Procario JR, Melfi T (2011) Submerged arc welding solutions for niobium micro-alloyed pipe steel – weld metal alloy systems. In: Rio Pipeline Conference & Exposition

    Google Scholar 

  18. ASTM Int (2017) ASTM E562–11 Standard Test Method for Determining Volume Fraction by Systematic Manual Point Count. ASTM International, West Conshohocken, pp 1–7

    Google Scholar 

  19. ASTM Int (2016) ASTM E384–16: Standard Test Method for Microindentation of Materials. ASTM Stand:1–43

  20. Matsuda F et al (1995) Review of mechanical and metallurgical investigations of M-A constituent in welded joint in Japan. Trans JWRI 24(1):1–24

    CAS  Google Scholar 

  21. Oh DW, Olson DL, Frost RH (1990) The influence of boron and titanium on low-carbon steel weld metal. Weld J:151-s–158-s

  22. Frantov II, Velichko AA, Bortsov AN, Utkin IY (2014) Weldability of niobium containing high-strength steel for pipelines. Weld J 93:23–29

    Google Scholar 

  23. Patterson T (2018) Effects of niobium on weld metal microstructure and properties in submerged arc welded X70 steel. The Ohio State University

  24. American Welding Society A5 Committee (2007) Specification for carbon steel electrodes and fluxes for submerged arc welding, United States, p 5

  25. American Welding Society A5 Committee (2007) Specification for low-alloy steel electrodes and fluxes for submerged arc welding, United States, pp 11–13

  26. ASTM Int (2016) ASTM E23-16b: Standard Test Methods for Notched Bar Impact Testing of Metallic Materials. ASTM Standards. ASTM International, West Conshohocken, pp 1–26

    Google Scholar 

  27. ASTM Int (2009) ASTM E8/8M-16a: Standard Test Methods for Tension Testing of Metallic Materials 1. ASTM Standards. ASTM International, West Conshohocken, pp 1–27

    Google Scholar 

Download references

Acknowledgments

The authors would like to thank ArcelorMittal for supporting this project and in particular Dr. Wenkao Hou and Dr. Murali Manohar. Also, the authors would like to thank Lincoln Electric for their substantial support with welding, machining, mechanical testing, and technical insight. The authors are particularly grateful to the following individuals from Lincoln Electric: John Procario, Nate McVicker, and Jeremy Wheeler.

Funding

This work was supported through the NSF sponsored Industry/University Cooperative Research Center (I/UCRC): Manufacturing and Materials Joining and Innovation Center (Ma2JIC).

Author information

Authors and Affiliations

  1. Welding Engineering Program, The Ohio State University, Columbus, OH, USA

    T. Patterson & J. C. Lippold

Authors
  1. T. Patterson
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. J. C. Lippold
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to T. Patterson.

Additional information

Publisher’s note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Recommended for publication by Commission IX - Behaviour of Metals Subjected to Welding

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Patterson, T., Lippold, J.C. Effect of niobium on the microstructure and properties of submerged arc welds in HSLA steel. Weld World 64, 1089–1105 (2020). https://doi.org/10.1007/s40194-020-00900-8

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s40194-020-00900-8

Keywords

Search

Navigation