Skip to main content
Log in

3D Non-Destructive Characterization of Electrical Steels for Quantitative Texture Analysis with Lab-Based X-ray Diffraction Contrast Tomography

  • Thematic Section: 5th International Congress on 3D Materials Science
  • Published:
Integrating Materials and Manufacturing Innovation Aims and scope Submit manuscript

Abstract

Electrical steels with high Si contents are widely used in electrical power transformers, motors and generators. Texture is the most important property for electrical steel as the orientations of grains have strong influences on the magnetization and electrical resistance of the materials. Lab-based diffraction contrast tomography (lab-based DCT) is a recently developed X-ray-based technique that can map the grain morphology and crystallographic orientation nondestructively in 3D. The capability of lab-based DCT in characterizing the grain structure of both non-oriented and grain-oriented electrical steels provides important complementary information to commonly used techniques such as X-ray diffraction (XRD) and electron backscattered diffraction (EBSD) in terms of full 3D grain mapping and significant grain statistics. In this work, we will present several case studies of using lab-based DCT to characterize the grain structure of both non-oriented and oriented electrical steels, with discussion on how this non-destructive 3D technique will contribute to the texture analysis in electrical steels.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8.

Similar content being viewed by others

References

  1. Senda K, Uesaka M, Yoshizaki S, Oda Y (2019) Electrical steels and their evaluation for automobile motors. World Electr Veh J 10:31–41. https://doi.org/10.3390/wevj10020031

    Article  Google Scholar 

  2. Kawalla R, Stöcker A, Prahl U et al (2019) Low-loss FeSi sheet for energy-efficient electrical drives. AIMS Mater Sci 5(6):1184–1198

    Article  Google Scholar 

  3. Moses A, Anderson P, Jenkins K, Stanbury H (2019) Electrical steels. Vol 1: fundamentals and basic concepts. The Institution of Engineering and Technology, London

  4. Mehdi M, He YL, Hilinski EJ et al (2019) Non-oriented electrical steel with core losses comparable to grain-oriented electrical steel. J Magn Magn Mater 491:165591. https://doi.org/10.1016/j.jmmm.2019.165597

    Article  CAS  Google Scholar 

  5. Dornera D, Zaefferera S, Lahnb L, Raabe D (2006) Overview of microstructure and microtexture development in grain-oriented silicon steel. J Magn Magn Mater 304:183–186. https://doi.org/10.1016/j.jmmm.2008.04.102

    Article  CAS  Google Scholar 

  6. Sidora JJ, Verbekena K, Gomes E et al (2012) Through process texture evolution and magnetic properties of high Si non-oriented electrical steels. Mater Character 71:49–57. https://doi.org/10.1016/j.matchar.2012.06.006

    Article  CAS  Google Scholar 

  7. Morito N, Komatsubara M, Shimizu Y (1998) History and recent development of grain oriented electrical steel at Kawasaki Steel. Kawasaki Steel Technical Report: No. 39.

  8. McDonald SA, Reischig P, Holzner C et al (2015) Non-destructive mapping of grain orientations in 3D by laboratory X-ray microscopy. Sci Rep 5:14665. https://doi.org/10.1038/srep14665

    Article  CAS  Google Scholar 

  9. Holzner C, Lavery L, Bale H et al (2016) Diffraction contrast tomography in the laboratory—applications and future directions. Microscopy Today 7:34–42. https://doi.org/10.1017/S1551929516000584

    Article  Google Scholar 

  10. Bachmann F, Bale H, Gueninchault N et al (2019) 3D grain reconstruction from laboratory diffraction contrast tomography. J App Crystal 52:634–651. https://doi.org/10.1107/S1600576719005442

    Article  Google Scholar 

  11. Niverty S, Sun J, Williams J et al (2019) A forward modeling approach to high-reliability grain mapping by laboratory diffraction contrast tomography. JOM 71:2695–2704. https://doi.org/10.1007/s11837-019-03538-0

    Article  CAS  Google Scholar 

  12. Oddershede J, Sun J, Gueninchault N et al (2019) Non-destructive characterization of polycrystalline materials in 3D by laboratory diffraction contrast tomography. Integr Mater Manuf Innov 8:217–225. https://doi.org/10.1007/s40192-019-00135-6

    Article  Google Scholar 

  13. Petryshynets I, Kováč F, Falat L et al (2018) Magnetic losses evolution of ferritic Fe–Si steel subjected to temper rolling at elevated temperature. Acta Phy Pol A 133:1065–1068. https://doi.org/10.12693/APhysPolA.133.1065

    Article  CAS  Google Scholar 

  14. Kováč F, Petryshynets I, Hornak P (2017) Microstructure and texture evolution in temper rolled Fe-Si steels with new system nano-inhibitors under the dynamic annealing conditions. Arch Metall Mater 62:1727–1732. https://doi.org/10.1515/amm-2017-0263

    Article  CAS  Google Scholar 

  15. Hayakawa Y (2017) Mechanism of secondary recrystallization of Goss grains in grain-oriented electrical steel. Sci Tech Adv Mater 18:480–497. https://doi.org/10.1080/14686996.2017.1341277

    Article  CAS  Google Scholar 

  16. Hayakawa Y, Omura T, Imamura T (2014) Onset of secondary recrystallization in high purity 3.3%Si steel. ISIJ Int 54:2385–2393. https://doi.org/10.2355/isijinternational.54.2385

    Article  CAS  Google Scholar 

  17. Fang F, Zhang YX, Lu X et al (2018) Abnormal growth of 100 grains and strong Cube texture in strip cast Fe-Si electrical steel. Scr Mater 147:33–36. https://doi.org/10.1016/j.scriptamat.2017.12.034

    Article  CAS  Google Scholar 

  18. Frommerta M, Zobrista C, Lahn L et al (2008) Texture measurement of grain-oriented electrical steels after secondary recrystallization. J Magn Magn Mater 320:657–660. https://doi.org/10.1016/j.jmmm.2008.04.102

    Article  CAS  Google Scholar 

  19. Sun J, Holzner C, Bale H et al (2020) 3D crystal orientation mapping of recrystallization in severely cold-rolled pure iron using laboratory diffraction contrast tomography. ISIJ Int 60:528–533. https://doi.org/10.2355/isijinternational.ISIJINT-2019-405

    Article  CAS  Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Jun Sun.

Ethics declarations

Conflict of interest

The authors declare that they have no conflict of interest.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Sun, J., Petryshynets, I., Meng, L. et al. 3D Non-Destructive Characterization of Electrical Steels for Quantitative Texture Analysis with Lab-Based X-ray Diffraction Contrast Tomography. Integr Mater Manuf Innov 10, 551–558 (2021). https://doi.org/10.1007/s40192-021-00245-0

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s40192-021-00245-0

Keywords

Navigation