Guo SQ. Densification of ZrB2-based composites and their mechanical and physical properties: A review. J Eur Ceram Soc 2009, 29: 995–1011.
Fahrenholtz WG, Hilmas GE, Talmy IG, et al. Refractory diborides of zirconium and hafnium. J Am Ceram Soc 2007, 90: 1347–1364.
Chamberlain AL, Fahrenholtz WG, Hilmas GE. Pressureless sintering of zirconium diboride. J Am Ceram Soc 2006, 89: 450–456.
Monteverde F, Bellosi A, Scatteia L. Processing and properties of ultra-high temperature ceramics for space applications. Mat Sci Eng A 2008, 485: 415–421.
Krishnarao RV, Bhanuprasad VV, Madhusudhan Reddy G. ZrB2-SiC based composites for thermal protection by reaction sintering of ZrO2+B4C+Si. J Adv Ceram 2017, 6: 320–329.
Monteverde F, Bellosi A, Guicciardi S. Processing and properties of zirconium diboride-based composites. J Eur Ceram Soc 2002, 22: 279–288.
Ahmadi Z, Nayebi B, Shahedi Asl M, et al. Sintering behavior of ZrB2-SiC composites doped with Si3N4: A fractographical approach. Ceram Int 2017, 43: 9699–9708.
Asl MS, Nayebi B, Ahmadi Z, et al. Effects of carbon additives on the properties of ZrB2-based composites: A review. Ceram Int 2018, 44: 7334–7348.
Zhang ZF, Sha JJ, Zu YF, et al. Fabrication and mechanical properties of self-toughening ZrB2-SiC composites from in situ reaction. J Adv Ceram 2019, 8: 527–536.
Feng B, Zhang Y, Li BY, et al. Medium-temperature sintering efficiency of ZrB2 ceramics using polymer-derived SiBCN as a sintering aid. J Am Ceram Soc 2019, 102: 855–866.
Colombo P, Mera G, Riedel R, et al. Polymer-derived ceramics: 40 years of research and innovation in advanced ceramics. J Am Ceram Soc 2010, 93: 1805–1837.
Stabler C, Ionescu E, Graczyk-Zajac M, et al. Silicon oxycarbide glasses and glass-ceramics: “All-Rounder” materials for advanced structural and functional applications. J Am Ceram Soc 2018, 101: 4817–4856.
Riedel R, Ruswisch LM, An LN, et al. Amorphous silicoboron carbonitride ceramic with very high viscosity at temperatures above 1500°C. J Am Ceram Soc 1998, 81: 3341–3344.
An LN, Riedel R, Konetschny C, et al. Newtonian viscosity of amorphous silicon carbonitride at high temperature. J Am Ceram Soc 1998, 81: 1349–1352.
Ravi Kumar NV, Mager R, Cai Y, et al. High temperature deformation behaviour of crystallized Si-B-C-N ceramics obtained from a boron modified poly(vinyl)silazane polymeric precursor. Scripta Mater 2004, 51: 65–69.
Ravi Kumar NV, Prinz S, Cai Y, et al. Crystallization and creep behavior of Si-B-C-N ceramics. Acta Mater 2005, 53: 4567–4578.
Stabler C, Roth F, Narisawa M, et al. High-temperature creep behavior of a SiOC glass ceramic free of segregated carbon. J Eur Ceram Soc 2016, 36: 3747–3753.
Zhang PF, Yang B, Lu Z, et al. Effect of AlN and ZrO2 on the microstructure and property of the 2Si-B-3C-N ceramic. Ceram Int 2018, 44: 3406–3411.
Ionescu E, Linck C, Fasel C, et al. Polymer-derived SiOC/ZrO2 ceramic nanocomposites with excellent high-temperature stability. J Am Ceram Soc 2010, 93: 241–250.
Bernard-Granger G, Addad A, Fantozzi G, et al. Spark plasma sintering of a commercially available granulated zirconia powder: Comparison with hot-pressing. Acta Mater 2010, 58: 3390–3399.
Zhang JY, Zhan H, Fu ZY, et al. In-situ synthesis and sintering of mullite glass composites by SPS. J Adv Ceram 2014, 3: 165–170.
Bernard-Granger G, Guizard C. Spark plasma sintering of a commercially available granulated zirconia powder: I. Sintering path and hypotheses about the mechanism(s) controlling densification. Acta Mater 2007, 55: 3493–3504.
Coble RL. Diffusion models for hot pressing with surface energy and pressure effects as driving forces. J Appl Phys 1970, 41: 4798–4807.
Kashyap SK, Mitra R. Densification behavior involving creep during spark plasma sintering of ZrB2-SiC based ultra-high temperature ceramic composites. Ceram Int 2020, 46: 5028–5036.
Mukherjee A, Bird JE, Dorn JE. Experimental correlations for high-temperature creep. Lawrence Berkeley National Laboratory. 1968, LBNL Report #: UCRL-18526.
Helle AS, Easterling KE, Ashby MF. Hot-isostatic pressing diagrams: New developments. Acta Metall 1985, 33: 2163–2174.
Lam DCC, Lange FF, Evans AG. Mechanical properties of partially dense alumina produced from powder compacts. J Am Ceram Soc 1994, 77: 2113–2117.
Chawake N, Koundinya NTBN, Srivastav AK, et al. On correlation between densification kinetics during spark plasma sintering and compressive creep of B2 aluminides. Scripta Mater 2015, 107: 63–66.
Ramond L, Bernard-Granger G, Addad A, et al. Sintering of a quasi-crystalline powder using spark plasma sintering and hot-pressing. Acta Mater 2010, 58: 5120–5128.
Liu GH, Li RD, Yuan TC, et al. Spark plasma sintering of pure TiCN: Densification mechanism, grain growth and mechanical properties. Int J Refract Met Hard Mater 2017, 66: 68–75.
Zhang ZB, Zeng F, Han JJ, et al. Synthesis and characterization of a new liquid polymer precursor for Si-B-C-N ceramics. J Mater Sci 2011, 46: 5940–5947.
Garvie RC. Stabilization of the tetragonal structure in zirconia microcrystals. J Phys Chem 1978, 82: 218–224.
Li HB, Liang KM, Gu SR. Stability of t-ZrO2 in zirconia powder prepared by sol-gel process. J Tsinghua Univ (Sci & Tech) 2001, 41: 13–15.
Guo SQ, Kagawa Y, Nishimura T, et al. Elastic properties of spark plasma sintered (SPSed) ZrB2-ZrC-SiC composites. Ceram Int 2008, 34: 1811–1817.
Guo SQ, Nishimura T, Mizuguchi T, et al. Mechanical properties of hot-pressed ZrB2-MoSi2-SiC composites. J Eur Ceram Soc 2008, 28: 1891–1898.
Talmy IG, Zaykoski JA, Martin CA. Flexural creep deformation of ZrB2/SiC ceramics in oxidizing atmosphere. J Am Ceram Soc 2008, 91: 1441–1447.
Mallik M, Ray KK, Mitra R. Effect of Si3N4 addition on compressive creep behavior of hot-pressed ZrB2-SiC composites. J Am Ceram Soc 2014, 97: 2957–2964.
Meléndez-Martínez J, Domínguez-Rodríguez A, Monteverde F, et al. Characterisation and high temperature mechanical properties of zirconium boride-based materials. J Eur Ceram Soc 2002, 22: 2543–2549.
Kingery WD, Bowen HK, Uhlmann DR. Introduction to Ceramics, 2nd edn. New York: Wiley, 1976.