Dielectric composites with a high and temperature-independent dielectric constant
- 2.1k Downloads
Dielectric composites made using P(VDF-CTFE) 88/12 mol% as polymer matrix and both micro-sized and nano-sized CaCu3Ti4O12 (CCTO) particles as filler are developed. These composites exhibit high dielectric constant with a small dielectric loss. More importantly, it is found that the dielectric constant of these composites is almost independent of temperature from 25 °C to 125 °C. Comparing the composites made using micro-sized CCTO particles, the composites made using nano-sized CCTO particles exhibit a smaller dielectric loss. The dielectric properties of these composites indicate that the nano-sized CCTO particles have a smaller dielectric constant than the micro-sized CCTO particles.
Key wordsdielectric constant composite CCTO P(VDF-CTFE) temperature dependence
- Sebastian MT, Jantunen H. Polymer-ceramic composites of 0–3 connectivity for circuits in electronics: A Review. Int J Appl Ceram Technol 2010, 7: 415–434.Google Scholar
- Bai Y, Cheng ZY, Bharti V, et al. High dielectric constant ceramic powder polymer composites. Appl Phys Lett 2000, 76: 38043806.Google Scholar
- Li ZM. Novel electroactive poly (vinylidene fluoride)-based polymer systems and their applications. Ph.D. Dissertation. Auburn University, 2004.Google Scholar
- Li JJ. Nanocomposites based on ferroelectric polymers for electrical energy storage Ph. D. Dissertation. Penn State University, 2009.Google Scholar
Open AccessThis article is distributed under the terms of the Creative Commons Attribution 2.0 International License (https://creativecommons.org/licenses/by/2.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.