Abstract
Wireless body sensor networks are becoming a ubiquitous solution to preventing chronic illnesses for a population with an ever-increasing number of elderly people. Through constant and real-time health monitoring, caregivers and medical personnel, and even patients themselves, can act more quickly in the event of a critical situation. The design of wireless body sensors must have several characteristics that enable their integration into the wearer’s life as seamlessly and unobtrusively as possible. Thus, how these sensors are powered becomes a topic of interest. Much research and work have been conducted on using thermoelectric generators to convert the waste heat from human metabolic activities into useful electricity to perpetually power these devices. The concept of an effective wireless body sensor network is also studied in this work. Analytical approaches are applied to a commercial module as an energy-scavenging device based on data gathered from a wide literature review. The ideal model is further optimized using a dimensionless approach to determine the feasibility of the optimized device in terms of implementation and performance. Finally, a design that considers all parameters of an effective energy-scavenging device is proposed alongside work for the future.
This is a preview of subscription content, log in to check access.

























References
- 1.
Hao, Y., Foster, R.: Wireless body sensor networks for health-monitoring applications. Physiol. Meas. 29, 27–56 (2008)
- 2.
Fass, L.: Patient centric healthcare. In: International Conference on Medical Electrical Devices and Technology, London (2007)
- 3.
Feied, C., Jordan, N., Kanhouwa, M., Kavangh, J.: The new world of healthcare work: a Microsoft white paper. In: UK Focus International Lecture, The Royal Academy of Engineering, (2006)
- 4.
Milenkovic, A., Otto, C., Javanov, E.: Wireless sensor networks for personal health monitoring: issues and impeentation. Comput. Commun. 29, 2521–2533 (2006)
- 5.
Binklet, P.: Predicting the potential of wearable technology. IEEE Engineering in Medicine and Biology Magazine 22(3), 23–27 (2003)
- 6.
Moser, W., Friedl, G., Haslinger, W., Hofbauer, H.: Small-scale pellet boiler with thermoelectric generator. In: 2006 International Conference on Thermoelectrics (2006)
- 7.
Karri, M.A., Thacher, E.F., Helenbrook, B.T.: Exhaust energy conversion by thermoelectric generator: two case studies. Energy Convers. Manag. 52, 1596–1611 (2011)
- 8.
Kishi, M., Nemoto, H., Yamamoto, M., Sudou, S., Mandai, M., Yamamoto, S.: Micro-thermoelectric modules and their applications to wristwatches as an energy source. In: 18th International Conference on Thermoelectrics, pp. 301–307 (1999)
- 9.
Leonov, V., Fiorini, P., Sedky, S., Hoof, C.V.: Thermoelectric MEMs generators as a power supply for a body area network. In: The 13th International Conference on Solid-State Sensors, Actuators and Microsystems, 2005. Digest of Technical Papers. TRANSDUCERS '05, Seoul, South Korea, (2005)
- 10.
Leonov, V., Torfs, T., Fiorini, P., Hoof, C.V.: Thermoelectric coverters of human warmth for self-powered wireless sensor nodes. IEEE Sens. J. 7(5), 650–657 (2007)
- 11.
Leonov, V., Fiorini, P., Torfs, T., Vullers, R.J.M., Hoof, C.V.: Thermal matching of a thermoelectric energy harvester with the environment and its application in wearable self-powered wireless medical sensors. In: 15th International Workshop on Thermal Investigations of ICs and Systems, Leuven, Belgium, (2009)
- 12.
Leonov, V., Hoof, C.V., Vullers, R.J.M.: Thermoelectric and hybrid generators in wearable devices and clothes. In: Sixth International Workshop on Wearable and Implantable Body Sensor Networks, Berkeley, CA, USA (2009)
- 13.
Leonov, V.: Thermal shunts in thermoelectric energy scavengers. J. Electron. Mater. 38(7), 1483–1490 (2009)
- 14.
Leonov, V.: Human machine and thermoelectric energy scavenging for wearable devices. In: International Scholary Research Network, pp. 1–11 (2011)
- 15.
Leonov, V.: Simulation of maximum power in the wearable thermoelectric generator with a small thermopile. Microsyst. Technol. 17, 495–504 (2011)
- 16.
Leonov, V.: Thermoelectric energy harvester on the heated human machine. J. Micromech. Microeng. 21, 1–8 (2011)
- 17.
Leonov, V.: Thermoelectric energy harvesters for powering wearable sensors. In: IEEE Sensors, pp. 1–4 (2012)
- 18.
Wang, Z., Leonov, V., Fiorini, P., Hoof, C.V.: Realization of wearable miniaturized thermoelectric generator of human body applications. Sens. Actuators A 156, 95–102 (2009)
- 19.
Chen, A., Mada, D., Wright, P.K., Evans, J.W.: Dispenser-printed planar thick-film thermoelectric energy generartors. J. Mech. Microeng. 21, 1–8 (2011)
- 20.
Wang, Z., Chen, A., Winslow, R., Madan, D., Juang, R.C., Nill, M., Evans, J.W., Wright, P.K.: Integration of dispenser-printed ultra-low-voltage thermoelectric and energy storage devices. J. Micromech. Microeng. 22, 1–7 (2012)
- 21.
Hyland, M., Hunter, H., Liu, J., Vee, E.: Wearable thermoelectric generators for human body heat harvesting. Appl. Energy 182, 518–524 (2016)
- 22.
Vostrikov, S., Somov, A., Gotovtsev, P.: Low temperature gradient thermoelectric generator: modelling and experimental verification. Appl. Energy 255, 113786 (2019)
- 23.
Madan, D., Wang, Z., Wright, P.K., Evans, J.W.: Printed flexible thermoelectric generators for use on low levels of waste heat. Appl. Energy 156, 587–592 (2015)
- 24.
Francioso, L., Pascali, C.D., Farella, I., Martucci, C., Creti, P., Siciliano, P., Perrone, A.: Flexible thermoelectric generator for ambient assisted living wearable biometric sensors. J. Power Sources 196(6), 3239–3243 (2011)
- 25.
Thielen, M., Sigrist, L., Magno, M., Hierold, C., Benini, L.: Human body heat for powering wearable devices: from thermal energy to application. Energy Convers. Manag. 131, 44–54 (2017)
- 26.
Xu, G., Yang, Y., Zhou, Y., Liu, J.: Wearable thermal energy harvester powered by human foot. Front Energy 7(1), 26–38 (2013)
- 27.
Weera, S., Attar, A., Lee, H.: Utilizing effective material properties to validate the performance of thermoelectric cooler and generator modules. Energy Convers. Manag. 205, 112427 (2020)
- 28.
Lee, H.: Thermal Design: Heat Sinks, Thermoelectrics, Heat Pipes, Compact Heat Exchangers, and Solar Cells. Wiley, Hoboken (2010)
- 29.
Salemo, D.: Ultralow voltage energy harvester uses thermoeletric generator for battery-free wireless sensors. JAnalog Innov 20(3), 1–11 (2010)
- 30.
Lee, H.: Optimal design of thermoelectric devices with dimensional analysis. Appl. Energy 106, 79–88 (2012)
Author information
Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Attar, A., Albatati, F. Wearable thermoelectric generators as energy harvesters for wireless body sensors. Int J Energy Environ Eng (2020). https://doi.org/10.1007/s40095-020-00365-x
Received:
Accepted:
Published:
Keywords
- Wearable thermoelectric
- Low grade thermoelectric generator
- Design of thermoelectric generator system