Skip to main content
SpringerLink
Log in

Bio-composites from banana tree fibers ambient with multi-walled carbon nanotubes: manufacturing and properties

  • Original Article
  • Published:
International Nano Letters Aims and scope Submit manuscript

Abstract

A biodegradable composite fibers have been fabricated from easily available banana tree fibers (BTFs) using a simple dip-drying technique, where carbon nanotubes (CNTs) are used as reinforcing agent. A safe radio frequency oxygen plasma processing method is used to functionalize the surface of the CNTs with hydrophilic oxygen-containing group. The fibers are chemically treated with NaOH followed by oxygen plasma treatment to increase the heat conduction between the fibers in thermal contact. The implications of incorporating CNTs in the BTFs are observed by studying the surface morphology, structural, thermal, electrical and mechanical properties. The homogeneous CNT coverage on the BTFs surface is featured by the scanning electron micrographs of the CNT/treated BTF. The crystallinity index is exposed through X-ray diffraction analysis, which indicates the crystalline feature of the nanocomposites. The surface modification by CNT treatment has improved the thermal stability and flame retardancy of BTFs. A gradual decrease of resistivity of these composite fibers is observed from 5.69 to 0.0021 Ω m by increasing the number of dip-drying cycle of BTFs in the CNTs solution. The electrical conductivity of the CNT/treated BTF becomes 163.75 S/m under the applied voltage of 100 V. The developed composite fibers exhibit an increase in the mechanical strength with the CNT coating. Therefore, the developed CNT-reinforced composite fibers affirm its aptitude as reliable reinforcement in electronic devices and as conductive fillers in composites industries.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig.6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig.11

Similar content being viewed by others

References

  1. Joseph, P.V., Joseph, K., Thomas, S.: Effect of processing variables on the mechanical properties of sisal-fibers-reinforced polypropylene composites. Compos. Sci. Technol. 59(11), 1625–1640 (1999)

    Article  CAS  Google Scholar 

  2. Udhayasankar, R., Karthikeyan, B.: A review on coconut shell reinforced composites. Int. J ChemTech Res. 8(11), 624–637 (2015)

    CAS  Google Scholar 

  3. Maya, J.J., Sabu, T.: Biofibers and biocomposites. Carbohydr. Polym. 71(3), 343–364 (2008)

    Article  Google Scholar 

  4. Devi, L.U., Bhagawan, S.S., Thomas, S.: Mechanical properties of pineapple leaf fibers-reinforced polyester composites. Appl. Polym. Sci. 64(9), 1739–1748 (1997)

    Article  CAS  Google Scholar 

  5. Murali Mohan Rao, K., Mohana Rao, K., Ratna Prasad, A.V.: Fabricating and testing of natural fibers composites: vakka, sisal, bamboo and banana. Mater. Des. 31(1), 508–813 (2010)

    Article  CAS  Google Scholar 

  6. Saliba, C.C., Orefice, R.L., Carneiro, J.R.G., Duarte, A.K., Schneider, W.T., Fernandes, M.R.F.: Effect of the incorporation of a novel natural inorganic short fibers on the properties of polyurethane composites. Polym. Test. 24(7), 819–824 (2005)

    Article  CAS  Google Scholar 

  7. Ortega, Z., Morón, M., Monzón, D.M., Badalló, P., Paz, R.: Production of banana fiber yarns for technical textile reinforced composites. Materials 9, 370–386 (2016)

    Article  Google Scholar 

  8. Atwa, Y., Maheshwari, N., Goldthorpe, I.A.: Silver nano wire coated threads for electrically conductive textiles. J. Mater. Chem. C 3, 3908–3912 (2015)

    Article  CAS  Google Scholar 

  9. Dong, H., Hinestroza, J.P.: Metal nanoparticles on natural cellulose fibers: electrostatic assembly and in situ synthesis. ACS Appl. Mater. Interfaces. 1(4), 797–803 (2009)

    Article  CAS  Google Scholar 

  10. Alam, N., Maria, K.H., Rahman, M.J., Sultana, P., Mieno, T.: A wet chemical synthesis and characterization of mwcnt-starch biocomposites. J. Bang. Acad. Sci. 44(1), 43–52 (2020)

    Article  CAS  Google Scholar 

  11. Tian, R., Wang, X., Li, M., Hu, H., Chen, R., Liu, F., Zheng, H., Wan, L.: An efficient route to functionalize singe-walled carbon Nanotubes using alcohols. Appl. Surf. Sci. 255(5), 3294–3299 (2008)

    Article  CAS  Google Scholar 

  12. Müller, H., Opitz, C., Skala, L.: The highly dispersed metal state—physical and chemical properties. J. Mol. Catal. A 54, 389–405 (1989)

    Article  Google Scholar 

  13. Tasis, D., Tagmatarchis, N., Bianco, A., Prato, M.: Chemistry of carbon nanotubes. Chem. Rev. 106(3), 1105–1136 (2006)

    Article  CAS  Google Scholar 

  14. Bhattacharya, M.: Polymer nanocomposites—a comparison between carbon nanotubes, graphene, and clay as nanofillers. Materials 9, 262 (2016)

    Article  Google Scholar 

  15. Maria, K.H., Mieno, T.: In: Rahman, M.M., Asiri, A.M., (eds.) Production of Water Dispersible Carbon Nanotubes and Nanotube/Cellulose Composite, Carbon Nanotubes - RecentProgress, pp. 235–259. Intech Open (2018)

    Google Scholar 

  16. Maria, K.H., Mieno, T.: Production and properties of carbon nanotube/cellulose composite paper. J. Nanomater. 2017, 6745029 (2017)

    Article  Google Scholar 

  17. Rahman, M.J., Mieno, T.: Conductive cotton textile from safely functionalized carbon nanotubes. J. Nanomater. 2015, 978484 (2015)

    Article  Google Scholar 

  18. Islam, M.J., Rahman, M.J., Mieno, T.: Safely functionalized carbon nanotube-coated jute fibers for advanced technology. Adv. Compos. Hybrid Mater. 3, 285–293 (2020)

    Article  CAS  Google Scholar 

  19. Felten, A., Bittencourt, C., Pireaux, J.J., Van Lier, G., Charlier, J.C.: Radio-frequency plasma functionalization of carbon nanotubes surface O2, NH3, and CF4 treatments. J. Appl. Phys. 98(7), ArticleID 074308 (2005)

  20. Chiu, C.H., Lin, C.C., Han, H.V.: High efficiency GaN-based light-emitting diodes with embedded air voids/SiO2 nanomasks, Nanotechnology, 23(4), Article ID 045303 (2012)

  21. Rahman, M.J., Mieno, T.: Water-dispersible multiwalled carbon nanotubes obtained from citric–acid-assisted oxygen plasma functionalization. Nanomaterials 2014, 508192 (2014)

    Google Scholar 

  22. Hirsch, A., Vostrowsky, O.: Functionalization of carbon nanotubes. Funct. Mol. Nanostruct. 245, 193–237 (2005)

    Article  CAS  Google Scholar 

  23. Star, A., Bradley, K., Gabriel, J.C.P., Gruner, G.: Nano-electronic sensors: chemical detection using carbon nanotubes. Polym. Mater. Sci. Eng. 89, 204 (2003)

    CAS  Google Scholar 

  24. El-Nahhal, I.M., Zourab, S.M., Kodeh, F.S., Selmane, M., Genois, I., Babonneau, F.: Nanosturctured copper oxide-cotton fibers: synthesis, characterization, and applications. Int. Nano Lett. 2, 14 (2012)

    Article  Google Scholar 

  25. Manzetti, S., Gabriel, J.C.P.: Methods for dispersing carbon nanotubes for nanotechnology applications: liquid nanocrystals, suspensions, polyelectrolytes, colloids and organization control. Int. Nano Lett. 9, 31–49 (2019)

    Article  CAS  Google Scholar 

  26. Parre, A., Karthikeyan, B., Balaji, A., Udhayasankar, R.: Investigation of chemical, thermal and morphological properties of untreated and NaOH treated banana fiber. Mater. Today Proc. 22(3), 347–352 (2019)

    Google Scholar 

  27. Morales, J., Olayo, M.G., Cruz, G.J., Herrera, F.P., Olayo, R.: Plasma modification of cellulose fibers for composite materials. Appl. Polym. 101(6), 3821–3828 (2006)

    Article  CAS  Google Scholar 

  28. Jandas, P.J., Mohanty, S., Nayak, S.K., Srivastava, H.: Effect of surface treatments of banana fibers on mechanical, thermai, and biodegrability properties of PLA/banana fibers biocomposites. Polym. Compos. 32(11), 1689–1700 (2011)

    Article  CAS  Google Scholar 

  29. Pandey, K.K., Pitman, A.J.: FTIR studies of the changes in wood chemistry following decay by brown-rot and white-rot fungi. Int. Biodeterior. Biodegrad. 52(3), 151–160 (2003)

    Article  CAS  Google Scholar 

  30. Shah, H., Srinivasulu, B., Subhas, C.: Influence of banana fibre chemical modification on the mechanical and morphological properties of woven banana fabric/unsaturated polyester resin composites. Polym. Renew. Resour. 4(2), 61–84 (2013)

    Google Scholar 

  31. Pandey, K.K.: A study of chemical structure of soft and hardwood and wood polymers by FTIR spectroscopy. Appl. Polym. Sci. 71(12), 1969–1975 (1999)

    Article  CAS  Google Scholar 

  32. Udhayasankar, R., Karthikeyan, B.: Preparation and properties of cashew nut shell liquid-based composite reinforced by coconut shell particles. Surf. Rev. Lett. 26(4), 1–17 (2019)

    Article  Google Scholar 

  33. Punyamurthy, R., Sampathkumar, D., Srinivasa, C.V., Bennehalli, B.: Effect of alkali treatment on water absorption of single cellulosic abaca fibers. Bio Resources 7(3), 3515–3524 (2012)

    CAS  Google Scholar 

  34. Chen, W., Yu, H., Liu, Y., Chen, P., Zhang, M., Hai, Y.: Individualization of cellulose nanofibers from wood using high-intensity ultrasonication combined with chemical pretreatments. Carbohydr. Polym. 83(4), 1804–1811 (2011)

    Article  CAS  Google Scholar 

  35. Dutta, D., Hazarika, R., Dutta, P.D., Goswami, T., Sengupta, P., Dutta, D.K.: Synthesis of Ag–Ag2S Janus nanoparticles supported on environmentally benign cellulose template and their catalytic applications. RSC Adv. 88, 85173–85181 (2016)

    Article  Google Scholar 

  36. Zavadskii, A.E.: X-ray diffraction method of determining the degree of crystallinity of cellulose materials of different anisotropy. Fibre Chem. 36, 425–430 (2004)

    Article  CAS  Google Scholar 

  37. Wang, Y., Weng, G.J.: Electrical conductivity of carbon nanotube and graphene-based nanocomposites. Micromech. Nanomech. Compos. Solids 56, 123–156 (2017)

    Google Scholar 

  38. Kenned, J.J., Sankaranarayanasamy, K., Binoj, J.S., Chelliah, S.K.: Thermo-mechanical and morphological characterization of needle punched non-woven banana fibers reinforced polymer composites. Compos. Sci. Technol. 185, 107890 (2020)

    Article  CAS  Google Scholar 

  39. Hatakeyama, H., Hatakeyama, T.: Interaction between water and hydrophilic polymers. Thermochim. Acta 308(1–2), 3–22 (1998)

    Article  CAS  Google Scholar 

  40. Czihak, C., Muller, M., Schober, H., Heux, L., Vogl, G.: Dynamics of water adsorbed to cellulose. Phys. B 266(1–2), 87–91 (1999)

    Article  CAS  Google Scholar 

  41. Yang, H., Yan, R., Chen, H., Lee, D.H., Zheng, C.: Characteristics of hemicellulose, cellulose and lignin pyrolysis. Fuel 86(12–13), 1781–1788 (2007)

    Article  CAS  Google Scholar 

  42. Beyer, G.: Short communication: carbon nanotubes as flame retardants for polymers. Fire Mater. 26(6), 291–293 (2002)

    Article  CAS  Google Scholar 

  43. Hassan, M.Z., Sapuan, S.M., Roslan, S.A., Aziz, S.A., Sarip, S.: Optimization of tensile behavior of banana pseudo-stem (Musa acuminate) fibers reinforced epoxy composites using response surface methodology. J. Mater. Res. Technol. 8(4), 3517–3528 (2019)

    Article  CAS  Google Scholar 

  44. Koziol, K., Vilatela, J., Moisala, A., Motta, M., Cunniff, P., Sennett, M., Windle, A.: High performance carbon nanotube fiber. Science 318(5858), 1892–1895 (2007)

    Article  CAS  Google Scholar 

  45. Nor, A.M., Sultan, M.H., Jawaid, M., Talib, A.A., Azmi, R.A., Harmaen, A., Asaari, A.: The effects of multi-walled CNT in bamboo/glass fibre hybrid composites: tensile and flexural properties. BioResources 13(2), 4404–4415 (2018)

    CAS  Google Scholar 

  46. Sapiai, N., Jumahat, A., Mahmud, J.: Mechanical properties of functionalized CNT filled kenaf reinforced epoxy composites. Mater. Res. Express 5, 045034 (2018)

    Article  Google Scholar 

Download references

Acknowledgements

The authors acknowledge gratefully to the Centre for Advanced Research of Sciences, University of Dhaka, Dhaka, Bangladesh for technical support. The authors also acknowledge the help of Mr. Md. Johurul Islam of the Department of Physics, Bangladesh University of Engineering and Technology during the sample processing and some of the measurement process.

Author information

Authors and Affiliations

  1. Department of Physics, University of Dhaka, Dhaka, 1000, Bangladesh

    Mahajabin Binte Mustafiz & Kazi Hanium Maria

  2. Department of Physics, Bangladesh University of Engineering and Technology, Dhaka, 1000, Bangladesh

    Mohammad Jellur Rahman

  3. Graduate School of Science and Technology, Shizuoka University, Shizuoka, 422-8529, Japan

    Tetsu Mieno

Authors
  1. Mahajabin Binte Mustafiz
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Kazi Hanium Maria
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Mohammad Jellur Rahman
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Tetsu Mieno
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Kazi Hanium Maria.

Ethics declarations

Conflict of interest

The authors declare no conflict of interest. Only the authors had the right to publish the results as they were involved in the design of the study; in the collection, analyses, or interpretation of data; in the writing of the manuscript.

Ethical approval

This article does not contain any studies with human participants or animals performed by the author.

Additional information

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Mustafiz, M.B., Maria, K.H., Rahman, M.J. et al. Bio-composites from banana tree fibers ambient with multi-walled carbon nanotubes: manufacturing and properties. Int Nano Lett 11, 149–158 (2021). https://doi.org/10.1007/s40089-021-00331-3

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s40089-021-00331-3

Keywords

Search

Navigation