Abstract
This paper presents a new sampling method for fibre length measurement. This new method can meet the three features of an effective sampling method, also it can produce the beard with two symmetrical ends which can be scanned from the holding line to get two full fibrograms for each sample. The methodology was introduced and experiments were performed to investigate effectiveness of the new method. The results show that the new sampling method is an effective sampling method.
Similar content being viewed by others
References
Liu RH. A Study on the Testing of Cotton Short Fiber Content. Ph.D. Thesis, (Dong Hua University, Shanghai, China, 2002)
S.C. Jiang, K. Lai, X.D. Wang et al., Comparative study on sampling method in course. J. Northwest Inst. Text. Sci. Technol. China 15, 245–248 (2001)
National Standard of the People’s Republic of China, GB/T6098.1—2006, Test Method for Length of Cotton Fibers-Part 1:Roller Analyser
National Standard of the People’s Republic of China, GB/T13779—2008, Cotton fibres—Test method for length—Comb sorter method
Yu W. Textile Material, 1st ed. (Beijing, 2006), p. 63
Y.X. Zhang, J. Text. Res. China 5, 77–80 (1984)
X.F. He, W.Y. Liu, S.D. Xu, J. Donghua Univ. (Eng Ed.) China 23, 125–129 (2006)
Y. Ikiz, J. Rust, W. Jasper, Fiber length measurement by image processing. Text. Res. J. 71, 905–910 (2001)
J.L. Woo, 39-An appraisal of the length measures used for cotton fibres. J. Text. Inst. 58, 557–572 (1967)
M.I. Zeidman, S.K. Batra, Determining short fiber content in cotton part I: some theoretical fundamentals. Text. Res. J. 61, 21–30 (1991)
Acknowledgement
The authors acknowledge the support given by the Scientific Research Starting Foundation in Hebei University of Science and Technology (Grant No. 1181176).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Wu, H., Li, X. & Zhang, J. A new sampling method for fibre length measurement. J. Inst. Eng. India Ser. E 99, 83–86 (2018). https://doi.org/10.1007/s40034-018-0115-6
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s40034-018-0115-6