Abstract
Silicone rubber’s special features such as “organosiloxanes polymer” has been originated from its unique molecular structure that they carry both inorganic and organic properties unlike other organic rubbers. In other words, due to the Si–O bond of silicone rubber and its inorganic properties, silicone rubber was superior to ordinary organic rubbers in terms of heat resistance, chemical stability, electrical insulating, abrasion resistance, weatherability and ozone resistance. With these unique characteristics, silicone rubber has been widely used to replace petrochemical products in various industries like aerospace, munitions industry, automobile, construction, electric and electronics, medical and food processing industry. Recently, these scopes of silicone applications have been expanding at a great speed by the demand of industries that want more reliable elastomer. This paper reviews on synthesis, general properties, applications and nanocomposites of silicone rubber.
This is a preview of subscription content, access via your institution.
References
Sun DH, Gurevich AB, Kaufmann LJ, Bent BE (1996) A new approach to understanding the Rochow process: synthesis of methylchlorosilanes from CH3 + Cl monolayers on Cu3Si in vacuum. Stud Surf Sci Catal 101:307–315
Dalen MJ, Berg PJ (1970) Thermodynamics of silicon compounds II. Ethyl- and phenylchlorosilanes. J Organomet Chem 24(2):277–283
Yoo BR, Jung N (2004) Synthesis of organosilicon compounds by new direct reactions. Adv Organomet Chem 50:145–177
Watanabe H, Asami M, Nagai Y (1980) Convenient laboratory synthesis of vinylic silicon compounds via the reactions of acetylene with hydrosilanes catalyzed by group-VIII metal phosphine complexes. J Organomet Chem 195(3):363–373
Iojoiu C, Abadieb JM et al (2000) Synthesis and photocrosslinking of benzyl acrylate substituted polydimethylsiloxanes. Eur Polym J 36(10):2115–2123
Buyl F (2001) Silicone sealants and structural adhesives. Int J Adhes Adhes 21(5):411–422
Palaprat G, Ganachaud F (2003) Synthesis of polydimethylsiloxane microemulsions by self-catalyzed hydrolysis/condensation of dichlorodimethylsilane. C R Chim 6(11–12):1385–1392
Katherine L, Ulman GA, Gornowicz KR, Larson LC (1989) Drug permeability of modified silicone polymers. I. Silicone–organic block copolymers. J Control Release 10(3):251–260
Parbhoo B, O’hare LA, Leadley SR (2002) Fundamental aspects of adhesion technology in silicones, chapt 14. In: Adhesion Science and Engineering, vol 1: the mechanics of adhesion, pp 677–709
Stelian V, Angelica V, Stefan O (2002) Interpenetrating polymer networks based on polyurethane and polysiloxane. Eur Polym J 38(4):829–835
Patel M, Skinner AR, Chaudhry A, Billingham NC, Mahieu B (2004) Impact of thermal ageing on the tincatalyst species in room temperature vulcanized polysiloxane rubbers. Polym Degrad Stab 83(1):157–161
Tang Y, Tsiang R (1999) Rheological, extractive and thermal studies of the room temperature vulcanized polydimethylsiloxane. Polymer 40(22):6135–6146
Kim BH, Cho MS, Kim MA, Woo HG (2003) One-pot synthesis of poly (alkoxysilane) by Si–Si/Si–O dehydrocoupling of silanes with alcohols using Group IV and VIII metallocene complexes. J Organomet Chem 685(1–2):93–98
Merker RL, Scott MJ, Haberland GG (1964) Random and block copolymers of poly (tetramethyl-p-silphenylene-siloxane) and polydimethylsiloxane. J Polym Sci A Gen Pap 2(1):31–44
Benahmed A, Lam R, Rechner N, Ho CM (2007) Period and height control during the microcontact printing of alkoxysilane for optical gratings. J Micro/Nanolith MEMS MOEMS 6(2):023007-1-5
Bueche AM (1955) The curing of silicone rubber with benzoyl peroxide. J Polym Sci 15(79):105–120
Thomas DK (1964) Stress/strain and swelling properties of a peroxide-cured methylvinyl silicone. Polymer 5:463–470
Warley RL, Feke DL, Manas-Zloczower I (2005) Effect of peroxide crosslinking on the dynamic modulus of silicone rubber. J Appl Polym Sci 97(4):1504–1512
Hartung HA, Berger SE (1962) Crosslinking of vinylsilicone resins initiated by dicumyl peroxide. J Appl Polym Sci 6(22):474–479
Lopez LM, Cosgrove AB, Hernandez-Ortiz JP, Osswald TA (2007) Modeling the vulcanization reaction of silicone rubber. Polym Eng Sci 47(5):675–683
Hamdani S, Longuet C, Lopez-Cuesta JM, Ganachaud F (2010) Calcium and aluminium-based fillers as flame-retardant additives in silicone matrices. I. Blend preparation and thermal properties. Polym Degrad Stab 95(9):1911–1919
Princy KG, Joseph R, Kartha CS (1998) Studies on conductive silicone rubber compounds. J Appl Polym Sci 69(5):1043–1050
Liu YR, Huang YD, Liu L (2007) Thermal stability of POSS/methylsilicone nanocomposites. Compos Sci Technol 67:2864–2876
Mark JE, Erman B, Eirich FR (1994) Science and technology of rubber, 2nd edn. Academic, San Diego
UL94 (2006) Tests for flammability of plastics for parts in devices and applications
Chen D, Yi S, Fang P, Zhong Y, Huang C, Wu X (2011) Synthesis and characterization of novel room temperature vulcanized (RTV) silicone rubbers using octa[(trimethoxysilyl)ethyl]-POSS as cross-linker. React Funct Polym 71(4):502–511
Chen D, Yi S, Wu W, Zhong Y, Liao J, Huang C, Shi W (2010) Synthesis and characterization of novel room temperature vulcanized (RTV) silicone rubbers using vinyl-POSS derivatives as cross linking agents. Polymer 51(17):3867–3878
Amin M, Akbar M, Amin S (2007) Hydrophobicity of silicone rubber used for outdoor insulation (an overview). Rev Adv Mater Sci 16:10–26
Meng Y, Wei Z, Lu YL, Zhang LQ (2012) Structure, morphology, and mechanical properties of polysiloxane elastomer composites prepared by in situ polymerization of zinc dimethacrylate. eXPRESS Polym Lett 6(11):882–894
Hodorog ADR et al (2012) Thermo-sensitive polymers based on graft polysiloxanes. Polym Bull 69(5):579–595
Ghanbari-Siahkali A et al (2005) Investigation of the hydrothermal stability of cross-linked liquid silicone rubber (LSR). Polym Degrad Stab 90(3):471–480
Tyagi D, Yílgör I, McGrath JE, Wilkes GL (1984) Segmented organosiloxane copolymers: 2. Thermal and mechanical properties of siloxane–urea copolymers. Polymer 25(12):1807–1816
McMillin CR (2006) Biomedical applications of rubbers and elastomers. Rubber Chem Technol 79(3):500–519
Tan J, Li X, Zee JWV (2007) Degradation of silicone rubber under compression in a simulated PEM fuel cell environment. J Power Sources 172(2):782–789
Gupta BR, Pattanayak S (1992) Thermal conductivity and thermal diffusivity of silicone-poly (styrelene butadiene) rubber blends from 60 to 300 K. Cryogenics 32(7):623–627
Hamdani S, Longuet C, Lopez-Cuesta JM, Ganachaud F (2009) Flame retardancy of silicone-based materials. Polym Degrad Stab 94(4):465–495
Saleem A, Frormann L, Soever A (2010) Fabrication of extrinsically conductive silicone rubbers with high elasticity and analysis of their mechanical and electrical characteristics. Polymers 2:200–210
Morari C, Balan I, Pintea J, Chitanu E, Iordache I (2011) Electrical conductivity and electromagnetic shielding effectiveness of silicone rubber filled with ferrite and graphite powders. Prog Electromagn Res M 21:93–104
Mazurek MH (2007) Silicones, comprehensive organometallic chemistry III, from fundamentals to applications. Elsevier, Amsterdam, pp 651–697
Southwart DW (1976) Comparison of bound rubber and swelling in silicone rubber/silica mixes and in silicone rubber vulcanizates. Polymer 17(2):147–152
Ettouney H, Majeed U (1997) Permeability functions for pure and mixture gases in silicone rubber and polysulfone membranes: dependence on pressure and composition. J Membr Sci 135(2):251–261
Lewis FM (1962) The science and technology of silicone rubber. Rubber Chem Technol 35(5):1222–1275
Bazaka K, Jacob MV, Crawford RJ, Ivanova EP (2011) Plasma-assisted surface modification of organic biopolymers to prevent bacterial attachment. Acta Biomater 7(5):2015–2028
Gu X, Ding F, Yang Y, Liu J (2011) Construction of tissue engineered nerve grafts and their application in peripheral nerve regeneration. Prog Neurobiol 93:204–230
Momen G, Farzaneh M (2011) Survey of micro/nano filler use to improve silicone rubber for outdoor insulators. Rev Adv Mater Sci 27:1–13
Rao H, Zhang Z, Tian Y (2012) Preparation and high oxygen-enriching properties of cross-linking polydimethylsiloxane/SiO2 nanocomposite membranes for air purification. Transp Phenom Fluid Mech. doi:10.1002/aic.13860
Al-Hartomy OA, Al-Solamy F, Al-Ghamdi A, Dishovsky N, Iliev V, El-Tantawy F (2011) Dielectric and microwave properties of siloxane rubber/carbon black nanocomposites and their correlation. Int J Polym Sci. doi:10.1155/2011/837803
Huang Y, Wang M, Qiu H, Xiang B, Zhang Y (2008) Research and preparation method of flexible tactile sensor material. doi:10.5772/6630
Kim HS, Kwon SM, Lee KH, Yoon JS, Jin HJ (2008) Preparation and characterization of silicone rubber/functionalized carbon nanotubes composites via in situ polymerization. J Nanosci Nanotechnol 8:5551–5554
Wen J, Li Y, Zuo Y, Zhou G, Li J, Jiang L, Xu W (2008) Preparation and characterization of nano-hydroxyapatite/silicone rubber composite. Mater Lett 62(19):3307–3309
Yamashita RI, Takeuchi Y, Kikuchi H, Shirai K, Yamauchi T, Tsubokawa N (2006) Preparation of antibacterial polymer-grafted nano-sized silica and surface properties of silicone rubber filled with the silica. Polym J 38:844–851
Frogley MD, Ravich D, Wagner HD (2003) Mechanical properties of carbon nanoparticle-reinforced elastomers. Compos Sci Technol 63:1647–1654
Simon MW, Stafford KT, Ou DL (2008) Nanoclay reinforcement of liquid silicone rubber. J Inorg Organomet Polym Mater Sept 18(3):364–373
Chen L, Lu L, Wu D, Chen G (2007) Silicone rubber/graphite nanosheet electrically conducting nanocomposite with a low percolation threshold. Polym Compos 28(4):493–498
Zhou H, Wang H, Niu H, Gestos A, Wang X, Lin T (2012) Fluoroalkyl silane modified silicone rubber/nanoparticle composite: a super durable, robust superhydrophobic fabric coating. Silicone rubber nanocomposites containing a small amount of hybrid fillers with enhanced electrical sensitivity. Adv Mater 24(18):2409–2412
Witt N, Tang Y, Ye L, Fang L (2013) Silicone rubber nanocomposites containing a small amount of hybrid fillers with enhanced electrical sensitivity. Mater Des 45:548–554
Liu X, Li Y, Liu Y, Zhu G, Liu J, Yang W (2011) Capillary supported ultrathin homogeneous silicalite-poly(dimethylsiloxane) nanocomposite membrane for bio-butanol recovery. J Membr Sci 369(1–2):228–232
Hosseini MS, Tazzoli-Shadpour M, Amjadi I, Katbab AA, Jaefargholi-Rangraz E (2011) Nanobiocomposites with enhanced cell proliferation and improved mechanical properties based on organomodified-nanoclay and silicone rubber. World Acad Sci Eng Technol 60:1159–1162
Ninglin Z, xiaoxian X, yanru W (2002) Study on mechanical property of exfoliated silicone rubber/clay nanocomposites. Acta Polym Sin 1(2):253–256
Jung SY, Kim BK (2009) Preparation and characteristics of high voltage liquid silicone rubber by modified cross-linking agent. Trans Electr Electron Mater 10(1):9–15
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Shit, S.C., Shah, P. A Review on Silicone Rubber. Natl. Acad. Sci. Lett. 36, 355–365 (2013). https://doi.org/10.1007/s40009-013-0150-2
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s40009-013-0150-2
Keywords
- Polydialkylsiloxanes
- Elastomer
- Room temperature vulcanization
- Liquid silicone rubbers
- Nanocomposite