MTZ worldwide

, Volume 73, Issue 6, pp 60–65 | Cite as

Simulation Method for Diesel Fuel Entry Into Lubrication Oil

  • Markus Ehrly
  • Markus Jakob
  • Matthias Budde
  • Stefan Pischinger
Research Injection



This article is the scientific result of the research project “Developing a Simulation System for Diesel Fuel Entry into Engine Oil Considering the Operating Conditions during Regeneration Mode”, assigned by Forschungsvereinigung Verbrennungskraftmaschinen e. V. (FVV, Frankfurt). The project was supported by a working group of FVV under the supervision of Dr. Annette C. Jooss, Daimler AG. We would like to thank this working group for the great support. Furthermore, we thank Dipl.-Ing. Andreas Behn, Dipl.-Ing. Matthias Feindt, Dr.-Ing. Sven Krause, Dr.-Ing. Michael Wittler, Dr.-Ing. Grazia Lamanna and Dipl.-Ing. Hassan Gomaa for their active support in this research project.


  1. [1]
    Scholz, V.; Frisse, P.; Herrmann, H.-O.: Exhaust Emission Design to Improve Particulate Filter Regeneration. SAE-Toptec, September 2000, GöteborgGoogle Scholar
  2. [2]
    Krüger, M.; Wiartalla, A.; Lichtenberg, T.; Körfer, T.: Emission Concepts for Future Passenger Car Diesel Engines. 24th International Vienna Motor Symposium, 2003Google Scholar
  3. [3]
    Reggie, Z.; Yiqun, H.; Magdi, K.: Methodologies to Control DPF Uncontrolled Regenerations. SAE Technical Paper Series, 2006-01-1090Google Scholar
  4. [4]
    Krüger, M.; Wiartalla, A.; Scholz, V.; Adomeit, P.; Rohs, H.: Regeneration Mode and Engine-Related Long-Term Effects in Diesel Engines. 13th Aachen Colloquium for Vehicle and Engine Engineering, 2004Google Scholar
  5. [5]
    Stein, C.; Budde, M.; Krause, S.; Brandt, S.; Schlerege, F.: Beeinflussung der Schmierölemissionen durch die Gemischbildung im Brennraum, FVV Zwischenbericht zum Vorhaben Nr. 933, Heft R545, 2009, 2004Google Scholar
  6. [6]
    Pischinger, S.; Schnitzler, J.; Wiartalla, A.; Scholz, V.: Investigation of a NONOx-Adsorber Catalyst used with a Passenger Car Diesel Engine. In: MTZ 64 (2003), No. 3Google Scholar
  7. [7]
    Budde, M.; Jakob, M.; Ehrly, M.; Lamanna, G.: Developing a Simulation System for Diesel Fuel Entry into Engine Oil Considering the Operating Conditions during Regeneration Mode. Final report by FVV, project No. 990, 2011Google Scholar
  8. [8]
    Baumgartner, C.: Modelling the Influence of Cavitation on the Primary Jet Breakup during High Pressure Diesel Injection. VDI Series 12, No. 543, VDI-Verlag, Düsseldorf, 2003Google Scholar
  9. [9]
    Behn, A.; Feindt, M.; Krause, S.; Matz, G.: Entwicklung eines Gasentnahmesystems zur kurbelwellenwinkelaufgelösten Entnahme von Ölemissionen aus dem Brennraum von Dieselmotoren. Informationstagung Motoren, Herbsttagung 2011, Fulda, Heft R 556Google Scholar
  10. [10]
    Amsden, A. A.; O’Rourke P. J.; Butler, T. D.: KIVA-II: A Computer Program for Chemically Reactive Flows with Sprays. Los Alamos National Laboratory Report, LA-11560-MS, 1989Google Scholar
  11. [11]
    Kong, S.-C.; Han, Z.; Reitz, R. D.: The development and application of a diesel ignition and combustion model for multidimensional engine simulations. SAE 950278Google Scholar

Copyright information

© Springer Fachmedien Wiesbaden 2012

Authors and Affiliations

  • Markus Ehrly
    • 1
  • Markus Jakob
    • 1
  • Matthias Budde
    • 1
    • 2
  • Stefan Pischinger
    • 1
  1. 1.Institute for Combustion Engines (VKA) of the RWTH Aachen UniversityGermany
  2. 2.AachenGermany

Personalised recommendations