Advertisement

ADHESION ADHESIVES&SEALANTS

, Volume 12, Issue 1, pp 24–29 | Cite as

Part 1: Synthesis principle and properties

Functionalised PU-Nanoparticles in reactive diluent
  • Klaus-Uwe Koch
  • Daniele Rutz
  • Nicole Jagielski
  • Angela Kaufmann
  • Hans-Joachim Kogelnik
Research and Development
  • 32 Downloads

A novel insitu-process allows the manufacturing of very special solventfree, non-aqueous Polyurethane-Acrylates. Which principle is guiding the synthesis and what properties can be achieved?

Impact strength is one of the most fundamental properties of the polymer matrix of a high-performance adhesive in order to withstand high levels of stress. Another characteristic of materials with different elasticity is the ultimate elongation of the adhesive matrix. The ultimate elongations, as well as the impact strength, are conventionally increased by incorporating rubber components in an otherwise brittle matrix. This concept is, for example, applied in crash-optimised epoxy adhesives which have been proven for structural bonding in the automotive industry or in methacrylate adhesives, known as toughened acrylics and used for high-strength, wear-resistant metal/metal- or hard plastic bonding. This method of impact strength modification is especially successful in case of easily soluble and...

References

  1. /1/.
    J. Bishopp in in D. E. Packham (Hrsg.) „Handbook of Adhesives“, J. Wiley (2005), 560Google Scholar
  2. /2/.
    EP 1910436 B1, 14.04.2006Google Scholar
  3. /3/.
    E. Delebecq, J.-P. Pascault, B. Boutevin, F. Ganachaud, Chem. Rev. 2013, 113, 80CrossRefGoogle Scholar
  4. /4/.
    Szycher’s Handbook of Polyurethanes, Second Edition, Michael Szycher (ed.), CRC Press, Boca Raton, 2nd ed., 2012Google Scholar
  5. /5/.
    Kunststoff-Handbuch, Bd. 7 Polyurethane, G. W. Becker, D. Braun, G. Oertel Hrsg., 3. Auflage. 04/1993, Hanser Verlag, MünchenGoogle Scholar
  6. /6/.
    Desmocoll Hydroxypolyester-Polyurethane als Problemlöser für viele Klebanwendungen, Firmenschrift Bayer, LS 5732, Ausgabe 03.01Google Scholar
  7. /7/.
    http://www.bayercoatings.com/bms/db-rsc/bms_rsc_cas.nsf/id/ADDE_Desmocoll, Juli 2014
  8. /8/.
    E. Delebecq, J.-P. Pascault, B. Boutevin, F. Ganachaud, Chem. Rev. 2013, 113, 92CrossRefGoogle Scholar
  9. /9/.
    Irving Skeist, Hrsg., Handbook of Adhesives, 3. Edition, Chapman & Hall, New York, 1990Google Scholar
  10. /10/.
    B. Müller, W. Rath, Formulierung von Kleb- und Dichtstoffen, Vincentz Network, Hannover, 2004Google Scholar
  11. /11/.
    W. Grellmann, S. Seidler; Kunststoffprüfung; Hanser Fachbuch, München (2011), S. 162CrossRefGoogle Scholar

Copyright information

© Springer Fachmedien Wiesbaden 2015

Authors and Affiliations

  • Klaus-Uwe Koch
    • 1
  • Daniele Rutz
    • 2
  • Nicole Jagielski
    • 2
  • Angela Kaufmann
  • Hans-Joachim Kogelnik
    • 3
  1. 1.Industrial Engineering and Head of the Department of Organic Chemistry and PolymersWestphalian University of Applied ScienceRecklinghausenGermany
  2. 2.SikaWiesbadenGermany
  3. 3.Clou PartnersMunichGermany

Personalised recommendations