Literaturhinweise
Weiss, M.; Bonnel, P.; Hummel, R.; Steininger, N.: A complementary emissions test for light-duty vehicles: Assessing the technical feasibility of candidate procedures. In: Joint Research Centre (JRE) Scientific and Policy Reports, EUR 25572 EN, 2013
Hadler, J.; Lensch-Franzen, C.; Kehrwald, B.; Spicher, U.; Kirsten, K.; Gohl, M.; Guhr, C.: Methoden für die Entwicklung eines RDE-fähigen Antriebs. 36. Wiener Motorensymposium, 2015
Gohl, M.; Kehrwald, B.: Optimierung von Ölverbrauch, Reibleistung und Verschleiß durch Simulation und dynamische Messverfahren. In: Zylinderlaufbahn, Kolben, Pleuel — Innovative Systeme im Vergleich. VDI-Bericht, ISBN 978-3-18-091994-2, 2008
Hadler, J.; Gohl, M.; Knoll, G.; Backhaus, K.: Entwicklungswerkzeuge für die reibungsoptimierte Auslegung des Grundtriebwerks. In: MTZ 75 (2014), Nr. 3, S. 56–61
Disch, C.; Kubach, H.; Spicher, U.; Pfeil, J.; Altenschmidt, F.; Schaupp, U.: Investigations of Spray-Induced Vortex Structures during Multiple Injections of a DISI Engine in Stratified Operation Using High-Speed-PIV. SAE Technical Paper 2013-01-0563
Munnannur, A.; Chiruta, M.; Liu, G.: Thermal and Fluid Dynamic Considerations in Aftertreatment System Design for SCR Solid Deposit Mitigation. SAE Technical Paper 2012-01-1287
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Hadler, J., Lensch-Franzen, C., Kronstedt, M. et al. Kombination von Simulation und Versuchsführung zur zielgerichteten Antriebsentwicklung. ATZ Extra 20 (Suppl 8), 18–23 (2015). https://doi.org/10.1007/s35778-015-0046-5
Published:
Issue Date:
DOI: https://doi.org/10.1007/s35778-015-0046-5