Porenfreie Bauteile

Verringerung des Fehlstellengehalts und Prozessbeschleunigung im RTM-Prozess

This is a preview of subscription content, access via your institution.

BILD 1
BILD 2
BILD 3
BILD 4
BILD 5
BILD 6

Literaturhinweise

  1. [1]

    Lässig, R. et al.: Serienproduktion von hochfesten Faserverbundbauteilen, Roland Berger, München, 2012

    Google Scholar 

  2. [2]

    Arnold, M.; Mitschang, P.: Permeabilität als Schlüsselfaktor für kurze Zykluszeiten. In: Kunststoffe 2012/3, S. 45–48, 2012

    Google Scholar 

  3. [3]

    Patel, N.; Rohatgi, V.: Microscale flow behavior and void formation mechanism during impregnation through an unidirectional stitched fiber glass mat. In: Polymer Engineering and Science 35/1995/10, S. 837–851, 1995

    Google Scholar 

  4. [4]

    Park, C. H.; Lee, W. I.: Modeling void formation and unsaturated flow in liquid composite molding process: a survey and review. In: Journal of Reinforced Plastics & Composites 2011/30, S. 957–977

  5. [5]

    Gebart, B. R.: Permeability of Unidirectional Reinforcements for RTM. In: Journal of Composite Materials 26, S. 1100–1133, 1992

    CAS  Article  Google Scholar 

  6. [6]

    Ahn, K. J.; Seferis, J. C.: Simultaneaus Measurements of Permeability and Capillary Pressure of Thermosetting Matrices in Woven Fabric Reinforcements. In: Polymer Composites 12, S. 146–152, 1991

    CAS  Article  Google Scholar 

  7. [7]

    Schell, J.S.U.: Investigation of the Influence of Meso-Scale Flow Effects in Liquid Composite Moulding processes on the Laminate Quality. Ph.D. Thesis, ETH Zurich, 2007

    Google Scholar 

  8. [8]

    Patel, N.; Lee, L. J.: Modeling of Void Formation and Removal in Liquid Composite Molding, Part 1: Wettability Analysis. In: Polymer Composites 17/1996/1, S. 96–103

Download references

Author information

Affiliations

Authors

Corresponding author

Correspondence to Stefan Caba M. Eng..

About this article

Verify currency and authenticity via CrossMark

Cite this article

Caba, S., Koch, M. Porenfreie Bauteile. Lightweight Des 8, 56–61 (2015). https://doi.org/10.1007/s35725-015-0032-2

Download citation