Literaturverzeichnis
ASTM D897: Standard test method for tensile properties of adhesive bonds. ASTM International, West Conshohocken, PA, (2016), www.astm.org, http://dx.doi.org/10.1520/D0897-08R16
DIN EN 1465: Klebstoffe - Bestimmung der Zugscherfestigkeit von Überlappungsklebungen. Beuth Verlag, Berlin (2009)
Brandtner-Hafner, M.H.: Interface fracture behaviour of industrial adhesives: a novel evaluation approach for adhesive selection. Conference Paper, in-adhesives Symposium, München (2017), 221-229
Brandtner-Hafner, M.H.: Fracture analysis of structural adhesives: introducing a new benchmark for adhesive performance. Conference Paper, 5th International Conference on Structural Adhesive Bonding. Porto (Portugal), Faculty of Engineering - University of Porto, Porto (2019), 52-69, ISBN: 978-989-8927-74-3
Brandtner-Hafner, M.H.: Assessing the natural-healing behavior of adhesively bonded structures under dynamic loading. Engineering Structures 196 (2019) 109303, http://dx.doi.org/10.1016/j.engstruct.2019.109303
Brandtner-Hafner, M.H.: Innovative assessment concept for qualitative adhesive selection. adhesion - ADHESIVES + SEALANTS, 16 (2019) [2] 16-21, http://dx.doi.org/10.1007/s35784-019-0011-6
Brandtner-Hafner, M.H.: Holistic evaluation of industrial adhesives. adhesion - ADHESIVES + SEALANTS 17 (2020) [4] 20-23, http:// doi.org/10.1007/s35784-020-0347-y
Brandtner-Hafner, M.H.: Structural safety evaluation of adhesive bonds: a fracture analytical approach. Engineering Failure Analysis (2021) 105289, https://doi.org/10.1016/j.engfailanal.2021.105289
Anderson, T.L.: Fracture mechanics: fundamentals and applications, 3rd edition. CRC Press, Hoboken (2005)
Argon, A.S.: The physics of deformation and fracture of polymers. Cambridge University Press, Cambridge (2013), http://dx.doi.org/10.1557/mrs.2014.179
Weißgraeber, P., Becker, W.: Finite fracture mechanics model for mixed mode fracture in adhesive joints. International Journal of Solids and Structures 50 (2013) 2383-2394, http://dx.doi.org/10.1016/j.ijsolstr.2013.03.01
Afendi, M., Teramoto, T., Bakri, H. B., "Strength prediction of epoxy adhesively bonded scarf joints of dissimilar adherends", International Journal of Adhesion and Adhesives, Vol. 31, 2011, pp. 402-411, http://dx.doi.org/10.1016/j.ijadhadh.2011.03.001
Watson, P.S., Clauss, S., Ammann, S., Niemz, P.: Fracture properties of adhesive joints under mechanical stresses. Wood Research 58 (2013) 43-56
Blackman, B.R.K., Kinloch, A.J.: Fracture tests on structural adhesive joints. European Structural Integrity Society 28 (2001) 225-267, http://dx.doi.org/10.1016/s1566-1369(01)80036-4
ASTM D5573: Standard practice for classifying failure modes in fiber-reinforced-plastic (FRP) joints. ASTM International, West Conshohocken, PA, (2012), www.astm.org, http://dx.doi.org/10.1520/d5573-99r12
DIN EN 10365: Klebstoffe - Bezeichnung der wichtigsten Bruchbilder. Beuth Verlag, Berlin (1995)
DVS-Richtlinie 3302: Kleben im Karosseriebau - Bewertung von Bruchbildern. DVS Media, Düsseldorf (2017)
Hillerborg, A.: The theoretical basis of a method to determine the fracture energy GF of concrete. Materials and Structures 18 (1985) 291-296, http://dx.doi.org/10.1007/bf02472919
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Brandtner-Hafner, M. Einfluss von Substratvariationen auf die Klebsicherheit. Adhaes Kleb Dicht 65, 26–30 (2021). https://doi.org/10.1007/s35145-021-0487-5
Published:
Issue Date:
DOI: https://doi.org/10.1007/s35145-021-0487-5