Quellenverweis
G. Tlustochowicz, E. Serrano, R. Steiger, State-of-the-art review on timber connections with glued-in steel rods, Materials and Structures, 44 (2011) 997–1020.
Vašek, Milan. „Semi rigid timber frame and space structure connections by glued-in rods.“ Proceedings of the 10th world conference on timber engineering, Miyazaki, Japan. 2008.
Fragiacomo, Massimo, and Mark Batchelar. „Timber frame moment joints with glued-in steel rods. I: Design.“ Journal of Structural Engineering 138.6 (2011): 789–801.
Fragiacomo, Massimo, and Mark Batchelar. „Timber frame moment joints with glued-in steel rods. II: Experimental investigation of long-term performance.“ Journal of Structural Engineering 138.6 (2011): 802–811.
Werner, Gerhard; Zimmer, Karlheinz; Lißner, Karin: Holzbau 1, Grundlagen DIN 1052 (neu 2008) und Eurocode 5, Springer Verlag, 2008.
DIN EN 1995-1-1/NA:2010-12: Nationaler Anhang - National festgelegte Parameter — Eurocode.
Habenicht, Gerd. Kleben: Grundlagen, Technologie, Anwendungen. Springer, 1990.
Semiatin, S. L. Elements of induction heating: design, control, and applications. ASM International, 1988.
Rudnev, Valery, et al. Handbook of induction heating. CRC Press, 2002.
Buckley, John D., Robert L. Fox, and David F. Johnston. „Equipment and techniques for rapid bonding of composites.“ (1985).
Buckley, John D., and Robert L. Fox. „Rapid Electromagnetic Induction Bonding of Composites, Plastics, & Metals.“ MRS Proceedings. Vol. 124. Cambridge University Press, 1988.
Mahdi, S., et al. „A comparison of oven-cured and induction-cured adhesively bonded composite joints.“ Journal of composite materials 37.6 (2003): 519–542.
Carbas, R. J. C., L. F. M. Da Silva, and G. W. Critchlow. „Adhesively bonded functionally graded joints by induction heating.“ International Journal of Adhesion and Adhesives 48 (2014): 110–118.
O. Hahn, A. Kaimann, Schnelle und schonende Aushärtung von Kunststoffklebungen, Adhäsion 10 (2001), 35–38.
Frauenhofer, Michael, et al. „Wirtschaftliches Fügen in Serie und Reparatur.“ Adhäsion Kleben & Dichten 53.1–2 (2009): 36–41.
Frauenhofer, Michael, et al. „Wirtschaftliches Fügen in Serie und im Reparaturfall.“ Adhäsion Kleben & Dichten 52.12 (2008): 39–43.
Frauenhofer, Michael, et al. „Wirtschaftliches Fügen in Serie und Reparatur.“ Adhäsion Kleben & Dichten 53.3 (2009): 46–51.
Maurer, Arno, and Christian Lammel. „Rapid bonding of non-metallic materials.“ Adhesion Adhesives&Sealants 11.1 (2014): 26–29.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Vallée, T., Kohl, D., Vorholt, F. et al. Die Fünf-Minuten-Gewindestange. Adhaes Kleb Dicht 59, 36–39 (2015). https://doi.org/10.1007/s35145-015-0534-1
Published:
Issue Date:
DOI: https://doi.org/10.1007/s35145-015-0534-1