The waste tire was used as a precursor to prepare activated carbon, and the effect of different processing conditions on the prepared activated carbon was studied. Response surface methodology coupled with Box–Behnken Design (BBD) has been used to find the optimal experimental parameters for the preparation of activated carbon. Response surface methodology was implemented to evaluate the effects of activation temperature, activation time and impregnation ratio. BBD was used to determine the model for the different levels of activation temperature (400–600 °C), activation time (60–180 min) and potassium hydroxide-to-tire ratio (0.5–1.5). The obtained activated carbon was evaluated based on its ability to remove methylene blue dye from aqueous solution. The influential parameters that affected the quality of the prepared activated carbon were determined by analysis of variance based upon the response variable. The optimum condition obtained for the activated carbon preparation was at an activation temperature of 400 °C, the reaction time of 165 min and potassium hydroxide-to-tire ratio of 1.5. The regression equation obtained was validated which showed a good agreement with the predicted model with a maximum error of 1.5% and R2 value of 0.975.
This is a preview of subscription content, log in to check access.
Buy single article
Instant access to the full article PDF.
Price includes VAT for USA
Subscribe to journal
Immediate online access to all issues from 2019. Subscription will auto renew annually.
This is the net price. Taxes to be calculated in checkout.
Abdel-Ghani NT, El-Chaghaby GA, El Gammal MH, Rawash E-SA (2016) Optimizing the preparation conditions of ACs from olive cake using KOH activation. New Carbon Mater 31(5):492–500
Ahmad AA, Hameed BH, Ahmad AL (2009) Removal of disperse dye from aqueous solution using waste-derived AC: optimization study. J Hazard Mater 170:612–619
Alexandro MMV, Clarice AG, Edson MR, Ervim L, Willian FC, Vitor CA (2010) NaOH-AC from flamboyant (Delonix regia) pods: optimization of preparation conditions using central composite rotatable design. Chem Eng J 162:43–50
Antoniou N, Zabaniotou A (2013) Features of an efficient and environmentally attractive used tyres pyrolysis with energy and material recovery. Renew Sustain Energy Rev 20:539–558
Bestani B, Benderdouche N, Benstaali B, Belhakem M, Addou A (2008) Bioresource technology methylene blue and iodine adsorption onto an activated desert plant. Bioresour Technol 99:8441–8444
Bhattacharyya KG, Sharma A (2005) Kinetics and thermodynamics of methylene blue adsorption on Neem (Azadirachta indica) leaf powder. Dyes Pigments 65:51–59
Bulut Y, Ayd HA (2006) kinetics and thermodynamics study of methylene blue adsorption on wheat shells. Desalination 194:259–267
Cesar N, Jose RR (2011) Production of AC from organic by-products from beverage industry: surface area and hardness optimization by surface methodology. Ind Crops Prod 34:1528–1537
Chan OS, Cheung WH, McKay G (2011) Preparation and characterisation of demineralised tyre derived AC. Carbon 49(14):4674–4687
Cheng G et al (2013) Adsorption of methylene blue by residue biochar from copyrolysis of dewatered sewage sludge and pine sawdust. Desalin Water Treat 51:37–41
De Sousa FD, Scuracchio CH, Hu GH, Hoppe S (2017) Devulcanization of waste tire rubber by microwaves. Polym Degrad Stab 138:169–181
Deng H, Zhang G, Xu X, Tao G, Dai J (2010) Optimization of preparation of AC from cotton stalk by microwave assisted phosphoric acid chemical activation. J Hazard Mater 182:217–224
Diez C, Martinez O, Calvo LF, Cara J, Morán A (2004) Pyrolysis of tyres. Influence of the final temperature of the process on emissions and the calorific value of the products recovered. Waste Manag 24:463–469
Elwakeel KZ, El-Bindary AA, El-Sonbati AZ, Hawas AR (2017a) Magnetic alginate beads with high basic dye removal potential and excellent regeneration ability. Can J Chem 95(8):807–815
Elwakeel KZ, Elgarahy AM, Mohammad SH (2017b) Use of beach bivalve shells located at Port Said coast (Egypt) as a green approach for methylene blue removal. J Environ Chem Eng 5(1):578–587
Elwakeel KZ, El-Bindary AA, Ismail A, Morshidy AM (2017c) Magnetic chitosan grafted with polymerized thiourea for remazol brilliant blue R recovery: effects of uptake conditions. J Dispersion Sci Technol 38(7):943–952
Filiz K, Umit O, Suleyman K (2007) Optimization of manufacturing conditions for AC from Turkish lignite by chemical activation using response surface methodology. Appl Therm Eng 27:1212–1218
Jonusas A, Miknius L (2014) Effect of the pressure and feedstock state on the yield and properties of waste tire thermolysis products. Energy Fuels 28:2465–2471
Kavitha D, Namasivayam C (2007) Experimental and kinetic studies on methylene blue adsorption by coir pith carbon. Bioresour Technol 98:14–21
Liu Y, Zhao X, Li J, Ma D, Han R (2012) Characterization of bio-char from pyrolysis of wheat straw and its evaluation on methylene blue adsorption. Desalin Water Treat 46:115–123
Montgomery DC (2001) Design and analysis of experiments, 5th edn. Wiley, New York
Sahu JN, Jyotikusum A, Meikap BC (2010) Optimization of production conditions for ACs from tamarind wood by zinc chloride using response surface methodology. Bioresour Technol 101:1974–1982
Salman JM (2014) Optimization of preparation conditions for AC from palm oil fronds using response surface methodology on removal of pesticides from aqueous solution. Arab J Chem 7:101–108
San Miguel G, Fowler GD, Sollars CJ (2003) A study of the characteristics of ACs produced by steam and carbon dioxide activation of waste tyre rubber. Carbon 41:1009–1016
Senthilkumar T, Chattopadhyay SK, Miranda LR (2017) Optimization of AC preparation from pomegranate peel (Punica granatum peel) Using RSM. Chem Eng Commun 204(2):238–248
Shah J, Jan MR, Mabood F, Shahid M (2006) Conversion of waste tyres into carbon black and their utilization as adsorbent. J Chin Chem Soc 53(5):1085–1089
Stavropoulos GG, Zabaniotou AA (2009) Minimizing ACs production cost. Fuel Process Technol 90(7–8):952–957
Williams PT (2013) Pyrolysis of waste tyres: a review. Waste Manag 33(8):1714–1728
Zhang X, Li H, Cao Q, Jin LE, Wang F (2018) Upgrading pyrolytic residue from waste tires to commercial carbon black. Waste Manage Res 36(5):436–444
The authors would like to acknowledge the Chemical Engineering Department, Jadavpur University, India, to carry out the experiment and University Grant Commission, New Delhi, for the funding under UGC-FRP start-up grant.
Editorial responsibility: Hari Pant.
About this article
Cite this article
Mukherjee, T., Rahaman, M., Ghosh, A. et al. Optimization of adsorbent derived from non-biodegradable waste employing response surface methodology toward the removal of dye solutions. Int. J. Environ. Sci. Technol. 16, 8671–8678 (2019). https://doi.org/10.1007/s13762-018-02184-4
- Box–Behnken Design
- Response surface methodology
- Waste tire
- Chemical activation