Coupled physicochemical and bacterial reduction mechanisms for passive remediation of sulfate- and metal-rich acid mine drainage
Treatment of acid mine drainage (AMD) highly rich in sulfate and multiple metal elements has been investigated in a continuous flow column experiment using organic and inorganic reactive media. Treatment substrates that composed of spent mushroom compost (SMC), limestone, activated sludge and woodchips were incorporated into bacterial sulfate reduction (BSR) treatment for AMD. SMC greatly assisted the removals of sulfate and metals and acted as essential carbon source for sulfate-reducing bacteria (SRB). Alkalinity produced by dissolution of limestone and metabolism of SRB has provided acidity neutralization capacity for AMD where pH was maintained at neutral state, thus aiding the removal of sulfate. Fe, Pb, Cu, Zn and Al were effectively removed (87–100%); however, Mn was not successfully removed despite initial Mn reduction during early phase due to interference with Fe. The first half of the treatment was an essential phase for removal of most metals where contaminants were primarily removed by the BSR in addition to carbonate dissolution function. The importance of BSR in the presence of organic materials was also supported by metal fraction analysis that primary metal accumulation occurs mainly through metal adsorption onto the organic matter, e.g., as sulfides and onto Fe/Mn oxides surfaces.
KeywordsSulfate-reducing bioreactor Acid mine drainage Passive remediation Adsorption Heavy metal
The authors would like to thank the technical staffs of the Minerals and Geoscience Department, Perak, Imerys Minerals Malaysia Sdn. Bhd and laboratory assistants of Faculty of Environmental Studies, Universiti Putra Malaysia, for their technical assistance during the course of the project.
This work was primarily supported by Universiti Putra Malaysia under the research Project No. GP-IPS/2014/9438721. The authors also thank the support from research Grant No. FRGS 5524757 (Malaysian Ministry of Higher Education), IPM 9433300 and TWAS-Comstech UNESCO FR:3240270866.
- Abdullah MH, Kim KW, Aris AZ, Budin K, Praveena SM (2008) Profiling toxic metals distribution in river environment from post-mining area of Mamut, Sabah, Malaysia. Research Report 2008, Universiti Malaysia SabahGoogle Scholar
- Alshaebi FY, Yaacob WZW, Samsudin AR, Alsabahi E (2009) Risk assessment at abandoned tin mine in Sungai Lembing, Pahang. Electron J Geotech Eng 14:1–9Google Scholar
- Balintova M, Holub M, Singovszka E (2012) Study of iron, copper and zinc removal from acidic solutions by sorption. Chem Eng Trans 28:175–180Google Scholar
- Jena V, Gupta S, Dhundhel RS, Matic N, Bilinski SF, Devic N (2013) Determination of total heavy metal by sequential extraction from soil. Int J Res in Environ Sci Technol 3:35–38Google Scholar
- Jopony M, Tongkul F (2009) Acid mine drainage at Mamut Copper Mine, Sabah, Malaysia. Borneo Sci 3:83–94Google Scholar
- Mandadi K (2012) Removal of heavy metals using modified limestone media: zinc and cadmium. Western Kentucky University, United StatesGoogle Scholar
- Sawyer CN, McCarty PL, Parkin GF (2003) Chemistry for Environmental Engineering and Science, 5th edn. McGraw-Hill International, New YorkGoogle Scholar
- Shi T, Yang D, Feng Y, Song W, Ye J, Zhou Y, Qiu R (2015) Simulative applied study on treatment of acid mine drainage by successive alkalinity producing systems. Chin J Environ Eng 9:2277–2283Google Scholar
- Wali A, Colinet G, Ksibi M (2014) Speciation of heavy metals by modified BCR sequential extraction in soils contaminated by phosphogypsum in Sfax, Tunisia. Environ Res Eng Manag 4:14–26Google Scholar
- Yaacob WZ, Pauzi NSM, Mutalib H (2009) Acid mine drainage and heavy metals contamination at abandoned and active mine sites in Pahang. Bull Geol Soc Malays 55:15–20Google Scholar