Abstract
Nanocomposites can be used as an acoustic panel to adsorb noise. The aim of this study was to evaluate: (1) acoustic, (2) physical, and (3) mechanical properties of agro-environmental nanocomposites. To prepare the nanocomposites, wood flour, PVA glue, and aluminum nanoparticles (between 1 and 4 %) were hardly mixed and heated at near 220 °C for 120 min. In the next step, sound absorption coefficient, transmission loss, water absorption percentage, thickness swelling percentage, density, flexural strength, flexural modulus, tensile strength, and tensile modulus of nanocomposites were measured. This study showed that the increase in nanoparticle percentage led to the increase in flexural strength, flexural modulus, water absorption percentage, thickness swelling percentage, density, and sound absorption coefficient. But, the increase in nanoparticle percentage led to the decrease in tensile strength, tensile modulus, and transmission loss. The authors think that the nanocomposites are suitable as an agro-industrial nanocomposite to reduce noise.
Similar content being viewed by others
References
Asmatulu R, Khan W, Yildirim MB (2009) Acoustical properties of electrospun nanofibers for aircraft interior noise reduction. In: ASME 2009 international mechanical engineering congress and exposition. American Society of Mechanical Engineers, pp 223–227
Bahrambeygi H, Sabetzadeh N, Rabbi A, Nasouri K, Shoushtari AM, Babaei MR (2013) Nanofibers (PU and PAN) and nanoparticles (Nanoclay and MWNTs) simultaneous effects on polyurethane foam sound absorption. J Polym Res 20:1–10
Balazs AC, Emrick T, Russell TP (2006) Nanoparticle polymer composites: where two small worlds meet. Science 314:1107–1110
Barkhordari A, Barzegar S, Hekmatimoghaddam H, Jebali A, Moghadam SR, Khanjani N (2014) The toxic effects of silver nanoparticles on blood mononuclear cells. Int J occup Environ Med 5:394–398
Byakova A, Bezim’yanny Y, Gnyloskurenko S, Nakamura T (2014) Fabrication method for closed-cell aluminium foam with improved sound absorption ability. Proced Mater Sci 4:9–14
Charles MSA (1998) Acoustics: architecture, engineering, the environment. William K Stout Publishers, San Francisco
Chauve G, Heux L, Arouini R, Mazeau K (2005) Cellulose poly (ethylene-co-vinyl acetate) nanocomposites studied by molecular modeling and mechanical spectroscopy. Biomacromolecules 6:2025–2031
Cox TJ, D’Antonio P (2009) Acoustic absorbers and diffusers: theory, design and application. CRC Press, Boca Raton
Gayathri R, Vasanthakumari R, Padmanabhan C (2013) Sound absorption, thermal and mechanical behavior of polyurethane foam modified with nano silica, nano clay and crumb rubber fillers. Int J Sci Eng Res 4:301–308
Guiping C, Deping H, Guangji S (2001) Underwater sound absorption property of porous aluminum. Colloids Surf, A 179:191–194
Harris CM, Piersol AG, Paez TL (2002) Harris’ shock and vibration handbook, vol vol 5. McGraw-Hill, New York
Ismail L, Ghazali MI, Mahzan S, Zaidi AMA (2010) Sound absorption of Arenga Pinnata natural fiber. World Acad Sci Eng Technol 67:804–806
Jebali A, Hekmatimoghaddam S, Kazemi B (2014) The cytotoxicity of silver nanoparticles coated with different free fatty acids on the Balb/c macrophages: an in vitro study. Drug chem Toxicol 37:433–439
Jiang Z-h, Zhao R-j, Fei B-h (2004) Sound absorption property of wood for five eucalypt species. J For Res 15:207–210
Koizumi T, Tsujiuchi N, Adachi A (2002) The development of sound absorbing materials using natural bamboo fibers. High Perform Struct Compos 4:157–166
Krokhin AA, Arriaga J, Gumen LN (2003) Speed of sound in periodic elastic composites. Phys Rev Lett 91:264302
Lee J, Kim GH, Ha CS (2012) Sound absorption properties of polyurethane/nano-silica nanocomposite foams. J Appl Polym Sci 123:2384–2390
Mahrholz T, Stängle J, Sinapius M (2009) Quantitation of the reinforcement effect of silica nanoparticles in epoxy resins used in liquid composite moulding processes. Compos A Appl Sci Manuf 40:235–243
Monties B (1991) Plant cell walls as fibrous lignocellulosic composites: relations with lignin structure and function. Anim Feed Sci Technol 32:159–175
Park K, Lee D, Rai A, Mukherjee D, Zachariah MR (2005) Size-resolved kinetic measurements of aluminum nanoparticle oxidation with single particle mass spectrometry. J Phys Chem B 109:7290–7299
Pourdanesh F, Jebali A, Hekmatimoghaddam S, Allaveisie A (2014) In vitro and in vivo evaluation of a new nanocomposite, containing high density polyethylene, tricalcium phosphate, hydroxyapatite, and magnesium oxide nanoparticles. Mater Sci Eng C 40:382–388
Saheb DN, Jog JP (1999) Natural fiber polymer composites: a review. Adv Polym Technol 18:351–363
Singh N, Davar SC (2004) Noise pollution-sources, effects and control J. Hum Ecol 16:181–187
Wang YH, Zhang CC, Ren LQ, Ichchou M, Galland MA, Bareille O (2014) Acoustic performance analysis of bionic coupling multi-layer structure. Trans Tech Publ 461:22–30
Acknowledgments
This article was extracted from the M.Sc thesis of Asiye Abbasi and was financially supported by Shahid Sadoughi University of Medical Sciences. The authors thank the laboratory staff of Pajoohesh Lab.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
There was no conflict of interest.
Additional information
Editoral responsibility: Mohamed Fathy Yassin.
Rights and permissions
About this article
Cite this article
Abbasi, A., Barkhordari, A., Hekmatimoghaddam, S. et al. The presentation of an agro-environmental nanocomposite: the study of its acoustic, physical and mechanical properties. Int. J. Environ. Sci. Technol. 14, 95–100 (2017). https://doi.org/10.1007/s13762-016-1148-3
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s13762-016-1148-3